erabros LS1 Robot Vacuum and Mop Combo User Guide

erabros LS1 Robot Vacuum and Mop Combo

LS1 Series

QUICK START GUIDE

To stay current on our latest updates and features, download the “Smart Life” APP.

Please be sure to read the enclosed User Manual prior to using your robot.

SETUP

1. SET1 Prep the robot

   • Remove protective film from robot and dock.
   • Attach the side brushes to the posts on the bottom of the robot
     

2. SET 2 Set up the dock

   • Find a permanent location for the dock in a central area with a strong Wi-Fi signal. Remove any objects that are closer than 3 ft. from either side of the dock, or closer than 5 ft. from the front Place the dock with its back against the wall, and connect the charging cord to the back.
   • The Indicator Light will illuminate green when the dock has power.

3. SET3Charge the robot
   Place robot on dock to charge for 6 hours.When charging begins, the robot will have voice reminder and the DOCK light will remain green.

4. SET4 Download the Smart Life™ APP
   Search “Smart Life” in the app store or scan the QR code and download.
   NOTE: For more information on connecting your robot, see next page.
   OPTIMIZING YOUR HOME FOR CLEANING

5. SET 5 Prep your home

   • Clear cords and remove small objects like toys, clothing, or drapes from floors.
   • Open interior doors in rooms you want your robot to clean.
   • Roll up the carpet fringe to make sure the robot will not get stuck there.
   • Anti-drop sensors prevent your robot from falling down from stairs. They may work less effectively if sensors are blocked or used on reflective/deep dark-colored floors. It is recommended to place physical barriers to block off areas where robot may fall.
     

CONNECTING THE Smart Life™ APP AND ROBOT

1. SET1
   Log in APP
   Sign up your “Smart Life” APP or log in if you have.

2. SET2
   Bluetooth
   Enable Bluetooth of your mobile phone.

3. SET3 Prep Robot for Wi-Fi
   Firmly press and hold -0 for 3 seconds till the robot start voice guide and meanwhile the green light indicator on the robot blinks.
   

4. SET4 Pair your Robot

   • Option One: You can pair your robot by adding the robot discovered on the top.
   • Option Two: You can also go to “Small Home Appliances· and choose Robot Vacuum (BLE+Wi-Fi)

5. SET5
   Wi-Fi Information
   Enter your 2.4G Wi-Fi Name and password and then move /onward Make sure your Wi-Ei is 2.4G.

6. SET6
   Success!
   

Customer Support

• the United States service_us@erabros.com
• Canada service_ca@erabros.com
• Deutsch land service_de@erabros.com
• France service_fr@erabros.com
• Espana service_es@erabros.com
• Italia service_it@erabros.com
• E3 ;;t service_jp@erabros.com
• the United Kingdom service_uk@erabros.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>