VOLLRATH R39734 One Piece Cafeteria Breath Guard Installation Guide

: June 1, 2024
: VOLLRATH

Table of Contents

VOLLRATH R39734 One Piece Cafeteria Breath Guard
Product Information
Product Usage Instructions
FAQs
Installation Instructions
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VOLLRATH R39734 One Piece Cafeteria Breath Guard

Product Information

Specifications:
- Product Name: Cafeteria Breath Guard
- Models: One Piece and Three Piece options available
- Manufacturer: Vollrath Company, L.L.C.
- Item No.: 2350030-01

Product Usage Instructions

One Piece Breath Guard Installation:
- Ensure the breath guard uprights (A) are aligned with the studs (B) and secure them with cap nuts (C).
- Repeat the above step for all four uprights.
Three-Piece Breath Guard Installation:
- Align and secure the breath guard uprights (A) with the studs (B) using cap nuts (C).
- Attach the breath guard support tube (D) between the uprights (A) and secure with cap nuts (C).
- Mount the one-piece breath guard (E) using screws (F) and cap nuts (C) at all four mounting locations.
- Attach the side breath protector (G) to the support tube (D) using cap nuts (C).
- Install the support bar and stud assembly (H) to the side breath guards (E).
- Secure the top breath guard (I) to the support bar and stud assembly (H) using cap nuts (C) at all mounting locations.

FAQs

Q: What should I do if the plastic cracks during installation?
- A: If you notice any cracking during installation, stop tightening immediately to prevent further damage. Contact Vollrath Company for assistance.
Q: Can I disassemble the breath guard once installed?
- A: Yes, you can disassemble the breath guard by following the reverse steps of the installation instructions.

Installation Instructions

These instructions cover the installation of the one-piece Cafeteria Breath Guard and the three piece Cafeteria Breath Guard.

One Piece Breath Guard Installation

Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:
NOTE: Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figure 1. Repeat for all four uprights.
- Figure 1. One Piece Breath Guard Installation
Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
Install the one-piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.
Install the side breath protector (G) to the support tube (D) securing it with cap nuts (C) as shown. Repeat on the other side.

Three-Piece Breath Guard Installation
Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:
NOTE: Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figures 1 and 2. Repeat for all four uprights.
- Figure 2. Three-Piece Breath Guard Installation
Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.
Install the side shield (G) to the support tube (D) securing it with cap nuts (C) as shown. Repeat on the other side.
Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.