2T-Technology VV-IKH Voyager Voice Intercom User Manual
- June 1, 2024
- 2T-Technology
Table of Contents
2T-Technology VV-IKH Voyager Voice Intercom
Specifications
- Product Name: Voyager Voice Intercom
- Model: GSM Intercom System
- Version: Rev 1.0
Incoming Call
When receiving an incoming call on the intercom:
- Press * followed by 1 to grant access.
- Press # to deny access.
Maintaining Your GSM Intercom System:
Make sure to top up the SIM card at predefined intervals to ensure proper
network connectivity.
Getting The End User App:
To use the End User App:
- Scan the QR code matching your phone type to install the app.
- Set the phone number of your intercom in the app settings.
Using the Keypad:
Enter 4-digit codes using the keypad. If you make a mistake, press the *
button to start over.
FAQ
Q: How do I grant access using the intercom?
A: Press * followed by 1 for granting access and # for denying access.
Voyager Voice Intercom
End User Manual
Please Give this Document to your Customer (the End User)
Using The Intercom
On the mobile Phone, press followed by 1 or followed by 2 (to trigger Output 1 or 2) to grant access (this will pulse the relay).- to NOT grant access terminate the call with #.
- Just hanging up the phone isn’t sufficient. If further numbers are programmed then these will be called in a follow on call. When not granting access, terminate the call by pressing #.
Maintaining your GSM Intercom System
Bill Pay SIM: If you have a Bill pay SIM in your GSM Intercom system then you don’t need to worry about keeping credit on the SIM. This is by far the easiest and most reliable way to operate these devices. Please discuss this option with your installer and he may be able to direct you to get a good value bill pay SIM. Pay as You Go SIM (PAYG): If you are using a PAYG SIM in your GSM Intercom then you need to be aware of the requirement to keep credit on this SIM. Register the phone number with the network operator, ie Vodafone, O2, GiffGaff etc. and top up the SIM as required by the network. For some networks you pay for credit and use it as you go. But for most there is a monthly requirement to top up. Also remaining credit is removed at the end of each month.
Please note it is not sufficient to have credit on a PAYG SIM, the networks require that you top up the SIM at pre defined intervals.
Getting The End User App
The End User App allows for simple use of the GSM Intercom. It allows one user control that entrance they have been assigned. Pass your camera over the QR image below, which matches the type of phone you have. When you reach the app page install it to your phone.
Using the Keypad.
Using the keypad is simple. Codes are 4 digits.
Should you make a mistake when entering a code and need to
start again, then simply press the Star button ( * ) as highlighted above to
start again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>