TUYA WD003 Wi-Fi Smart Garage Door Opener User Manual

TUYA WD003 Wi-Fi Smart Garage Door Opener

Product Specifications:

• Product Name: Smart Garage Controller
• Included Accessories: 3M Stickers, Line Holders Brackets, Ties Screws
• Power: Requires a power source to operate
• Compatibility: Check compatibility with your garage door opener model
• Connectivity: Requires connection to WiFi router for operation

Product Usage Instructions

1. Power Up the Device: Plug in the garage device. The red light and blue light will flash alternatively.
2. Connection to Opener: Use the included Red & Black wire to connect the device to your opener. Connect each end to the same terminals as the wall button wires.
3. Activation: Use a tiny screw or nail to press the button on the device. Your garage door should activate.
4. Pairing Process: Ensure that your IOS or Android device and the garage are within the range of your WiFi router during pairing.
5. Select Wall Switch Type: Power up the garage,and select the electrical wall switch type.

PACKAGE CONTANT

Test Device For Opener Compatibility

1. Power up the garage device, the red light and blue light flash alternatively.
2. Use the included Red & Black wire connect the device to your opener;Put each end to the same terminals as the wall button wires are terminated to.
3. Use a tiny screw or nail to click the buto in the device,your garage door should activate.

If this test fails,your device may not be compatible.For additional installation
Instructions and the list of compatible models,please check it from other’s
User manual and contact us online directly.

Test OK! Click the button every time, the garage door will open or close.

Below are checklist before using the device:

• Your smart phone or tablet should have connected a 2.4G WiFi with internet.
• The device only supports 2.4G Wi-Fi. If you use a 5G router (it provides two Wi-Fi signals: 5G and 2.4G), please select the 2.4G WiFi to connect your smartphone.
• Download one of the APPs: “Tuya Smart” APP or “Smart Life” APP from APP Store or Google Play store.
• During pairing process,make sure that your lOS or Android device and the garage are within the range of your WiFi router.
• Make sure your router is MAC-open. If not, please cancel the router’s MAC filtering setting first.

Install the “Tuya Smart” APP or “Smart Life” APP.

Add Device

The garage door will be activated when added successfully (when the blue LED stop blinking), so keep your door closed first.
Power up the garage ,the red light and blue light flash alternatively.
Launch APP, tap the icon “+” on the right top.
Select the ” Electrical ” → Select ” Wall Switch “type.
Tap “Confirm indicator rapidly blink”.
Input the correct 2.4G WiFi passwords. Then, tap Comfirm.
It will auto-connect with the device. Once the process is completed, it will prompt you that you can rename the device. Enter a new name and Save.

The APP can add many types of devices.

Do this installation After you successfully added the device to your app.

Keep your garage door is closed.

EASY INSTALLATION

1st Step : Power up.

2nd Step : Connect to the wall console.
Insert the Red & Black wire 2.0mm terminal to the garage, then put each end to the same terminals as the wall button wires are terminated to.

3rd Step : Connect to the garage door.
Insert the 2.0mm terminal of the sensor to the garage, then steady install the sensor and the magnet of the gap within 3mm to 15mm on your garage door with screws/bracket/3M gums/wall nail/line holders/ties.

If it is hard to install with screws, you can also use the 3M gums to finish.
If you are worried about the steady, you can use both screws and 3M gums.

Works With Alexa

1. Open Alexa App, tap on the menu on upper left corner. Go to Skills.
2. Enter “Tuya Smart” or “Smart Life” in the search field and search.
3. Tap “Tuya Smart” or “Smart Life”
4. Enable the skill.
   Enter your account information and tap on ‘Log in’ to link your account to your Amazon account. If your account is a phone number, you should select your country. If your account is an email address, please select a random country/region code

Voice commands:

• “Alexa, turn on {device name)”
• “Alexa, turn off {device name)”
• “Alexa, is the device name? locked?”

More Setting: Select Routines to create,then you can perform a series of actions, like reading the weather and turning on the lights, with single command.

Works With Google Home

1. Launch Google Home app, tap the menu.
2. Tap Home control.
3. Under Devices, tap the + icon.
   Tap “Tuya Smart” or “Smart Life” .
   Enter your account information and tap on ‘Log in’ to link your account to your Amazon account. If your account is a phone number, you should select your country. If your account is an email address, please select a random country/region code.

Voice commands:

• “Hey google, turn on {device name)”
• “OK google, turn off (device name)”
• “OK google, is {device name) on or off ?”

Works With iFTTT

1. Launch IFTTT app, tap Search. Enter “Tuya Smart” or “Smart Life” to search.
2. Enter “Tuya Smart” or “Smart Life” page.
3. Then you’ll need to enter account and log in.
4. Go to My Applets, tap “+” to create your own applet.

Make Your Home Smarter

Frequently Asked Questions (FAQ)

Is the device name locked?

To check if the device name is locked, you can use voice commands such as Alexa, is the device name locked.

How can I make my home smarter with this product?

You can create routines to perform a series of actions with a single command, like reading the weather and turning on lights. Select Routines for more settings.

How do I handle Open/Close Alarm notifications?

The product provides Open/Close Alarm notifications. You can use voice commands like OK Google, is device name on or off? to check the status.

Note: For any additional installation instructions or compatibility queries, refer to the user manual or contact us online directly.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>