PHILIPS BDP102 TownGuide Performer LED Module Owner’s Manual
- June 1, 2024
- Philips
Table of Contents
PHILIPS BDP102 Town Guide Performer LED Module Owner’s Manual
BDP102 LED25/740 DRW PCTR GR CLO-DDF2 D1
TOWNGUIDE PERF CLASSIC CONE, LED Module 2500 lm, 740 neutral white, Safety
class I, Distribution residential wide, Polycarbonate bowl/cover frosted,
Gray, Post-top for diameter 62 mm
The TownGuide Performer family consists of six recognizable, yet modern
shapes:
Flat Cone, Bowl, Classic Cone, Classic T, T and Tzero. Each luminaire has the
option of a clear (PCC), translucent (PCTR) or frosted (PCF) bowl (except
Tzero, which is only available with a clear bowl). With an extensive range of
lumen packages, neutral white or warm white LED lights sources, and a range of
dedicated optics for lower mounting heights, it’s easy to select the version
that best suits the specific requirements of your project. All this combined
with a long life expectancy of 100,000 operating hours. In addition, TownGuide
Performer has a variety of control system options that can make this luminaire
an integral part of smart energyreduction programs. This includes LumiStep,
DynaDimmer, and LineSwitch standalone dim control, and Coded Mains group
control, right up to seamless remote connectivity with Interact lighting
management software. Installation is easy. Thanks to the bayonet whistle
connector with integrated gland located in the spigot, there’s no need to open
the luminaire for installation. The Signify Service tag app offers direct
access to all relevant data, ensuring maintenance is easy too. Philips has
made every effort to make the Total Cost of Ownership (TCO) of the luminaire
as attractive as possible. And as TownGuide Performer is a dedicated LED
luminaire, compatible with a variety of control systems, there are significant
energy and maintenance cost savings compared with conventional lighting.
Product data
General Information
Lamp family code| LED25 [LED Module 2500 lm]
Light source replaceable| Yes
Number of gear units| 1 unit
Town Guide Performer
Driver included
| Yes
---|---
Light source engine type| LED
Service tag| Yes
Product family codec| BDP102 [TOWNGUIDE PERF CLASSIC CONE]
Lighting Technology| LED
Value ladder| Performance
CE mark| Yes
Warranty period| 5 years
Flammability mark| –
ENEC mark| ENEC mark
EU RoHS compliant| Yes
Serviceability class| Class A, luminaire is equipped with serviceable parts
(when applicable): LED board, driver, control units, surge protection device,
optics, front cover and mechanical parts
Light Technical
Upward light output ratio| 12
Luminous Flux| 1,600 lm
Standard tilt angle posttop| 0°
Standard tilt angle side entry| –
Correlated Color Temperature (Nom)| 4000 K
Luminous Efficacy (rated) (Nom)| 98 lm/W
Color rendering index (CRI)| 74
Light source color| 740 neutral white
Optical cover type| Polycarbonate bowl/cover frosted
Luminaire light beam spread| 39° x 96°
Optic type outdoor| Distribution residential wide
Operating and Electrical
Input Voltage| 220-240 V
Line Frequency| 50 to 60 Hz
Initial CLO power consumption| 16.4 W
Average CLO power consumption| 16.6 W
Inrush current| 45 A
Inrush time| 0.29 m s
Power Consumption| 16.4 W
Power Factor (Fraction)| 0.97
Connection| Screw connection block 5-pole
Cable| –
Number of products on MCB of 16 A type B| 26
Temperature
Ambient temperature range| -40 to +35 °C
Controls and Dimming
Dimmable| No
Driver/power unit/transformer| Power supply unit regulating
Control interface| –
Constant light output| No
Mechanical and Housing
Housing Material| Aluminum
Reflector material| –
Optic material| Acrylate
Optical cover material| Polycarbonate
Fixation material| Steel
Housing Color| Gray
Mounting device| Post-top for diameter 62 mm
Optical cover shape| Conical
Optical cover finish| Frosted
Overall length| 570 mm
Overall width| 570 mm
Overall height| 317 mm
Overall diameter| 570 mm
Effective projected area| 0.088 m²
Dimensions (Height x Width x Depth)| 317 x 570 x 570 mm
Approval and Application
Ingress protection code| IP66 [Dust penetration-protected, jetproof]
Mech. impact protection code| IK10 [20 J vandal-resistant]
Surge Protection (Common/Differential)| Luminaire surge protection level until
6 kV di‚erential mode and 6 kV common mode
Sustainability rating| Lighting for circularity
Protection class IEC| Safety class I
Initial Performance (IEC Compliant)
Luminous flux tolerance| +/-7%
Initial chromaticity| (0.38, 0.38) SDCM <5
Power consumption tolerance| +/-10%
Init. Color Rendering Index Tolerance| +/-2
Over Time Performance (IEC Compliant)
Control gear failure rate at median useful life 100000 h| 10 %
Lumen maintenance at median useful life* 100000 h| 93
Application Conditions
Performance ambient temperature Tq| 25 °C
Maximum dim level| 50%
Product Data
Order product name| BDP102 LED25/740 DRW PCTR GR CLODDF2 D1
Full product name| BDP102 LED25/740 DRW PCTR GR CLODDF2 D1
Full product code| 871951419133400
Order code| 910925868224
Material Nr. (12NC)| 910925868224
Town Guide Performer
Dimensional drawing
© 2024 Signify Holding All rights reserved. Signify does not give any
representation or warranty as to the accuracy or completeness of the
information included herein and shall not be liable for any action in reliance
thereon. The
information presented in this document is not intended as any commercial o‚er
and does not form part of any
quotation or contract, unless otherwise agreed by Signify. Philips and the
Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V.
www.lighting.philips.com
2024, March 14 – data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>