FAB GLASS AND MIRROR Acrylic Picture Frame Installation Guide
- June 1, 2024
- FAB GLASS AND MIRROR
Table of Contents
FAB GLASS AND MIRROR Acrylic Picture Frame
Product Information
Specifications:
- Product: Acrylic Picture Frame
- Installation Hardware Included:
- Standoff Clamp x 4
- Screw x 4
- Anchors x 4
Product Usage Instructions
Step 1: Determine Mounting Location
Determine the mounting location on the wall and mark hole locations using the assigned dimensions and a level.
Step 2: Drill Holes
Use a 9/32 drill bit and drill (4) holes 1 1/2 inches deep.
Step 3: Insert Anchors
Insert (4) Anchors into the drilled holes and ensure flexibility.
Step 4: Drill Additional Holes
Use a 9/32 drill bit and drill (4) holes 1/2 inch deep.
Step 5: Attach Standoffs Toggle Bolts
Attach standoff toggle bolts to the provided Phillips pen head screws and fix them using a screwdriver.
Step 6: Fix Hardware
Attach (4) cap screws provided with standoffs and fix the glass eraser board according to the figure.
Step 7: Place Picture
Place the picture between two Plexi acrylic sheets.
Step 8: Secure Frame
Tighten up the screws of the acrylic picture frame for a flawless finish.
Congratulations!
You have successfully installed your Acrylic Picture Frame.
FAQ
- Q: How many people are recommended for installation?
- A: It is recommended to use 2 people to install the Acrylic Picture Frame.
- Q: What type of hardware should be used when mounting to concrete?
- A: Use appropriate hardware when mounting to concrete for secure installation.
Hardware
| No# | Description | No# | Description | No# | Description |
|---|---|---|---|---|---|
| 1 | Standoff Clamp x 4 | 2 | Screw x 4 | 3 | Anchors x 4 |
Installation Instruction
Contact
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>