MiGEAR FBX864K Portable Bluetooth Speaker User Manual

MiGEAR FBX864K Portable Bluetooth Speaker

Product Information

Specifications

• Model: [Insert Model Number]
• Frequency Range: [Insert Frequency Range]
• Power Output: [Insert Power Output]
• Compliance: FCC Part 15

Product Usage Instructions

Installation

1. Ensure the device is placed on a stable surface.
2. Connect the device to a power source using the provided cable.
3. Consult the dealer or a technician for help if needed.

Operation

1. Turn on the device using the power button.
2. Adjust the frequency range as needed.
3. Avoid operating the device near other antennas or transmitters.

Maintenance

1. Keep the device clean and free from dust.
2. Avoid exposing the device to extreme temperatures or moisture.
3. Regularly check for any signs of wear and tear.

FAQ

• Q: Can I use the device in any environment?
• A: The device complies with FCC radiation exposure limits for an uncontrolled environment and can be used portably without restrictions.
• Q: What should I do if I encounter connectivity issues?
• A: If you experience connectivity issues, consult the dealer or an experienced technician for assistance to ensure proper operation.

PANEL FUNCTION DECLARATION

1. Master volume control /Power on/off switch
2. Audio input port
3. USB Port: Insert flash drive to play music
4. TF card Slot: Insert card to play music
5. Display panel
   • MODE: MODE SELECT/LED MODE
   • : PLAY/PAUSE /TWS
   • : PREVIOUS(Long press to fast backward.)
   • :NEXT(long press to fast forward.)
6. ECHO
7. MIC.VOL
8. Wired microphone input
9. Charging Port

REMOTE FUNCTION DECLARATION

1. PRESS FOR MUTE

2. MODE
   (Change to LINE-IN, USB, FM and BLUETOOTH mode)

3. SINGLE SONG REPEAT

4. VOLUME UP/DOWN

5. PREVIOUS SONG

6. PLAY, PAUSE

7. SCAN FUNCTION

8. NEXT SONG

9. EQ

10. 0-9 SELECTION FOR CHOOSING SONGS

BLUETOOTH FUNCTION DECLARATION

1. PRESS THE MODE BUTTON ON THE FRONT PANEL TO LAUNCH THE BLUETOOTH APPLICATION. YOU WILL THEN SEE THAT “FISHER-FBX864” SHOWS ON THE SCREEN.
2. SLIDE THE “BLUETOOTH” SWITCH TO “ON” ON SPEAKER. MAKE SURE BLUETOOTH IS ACTIVATED ON THE DEVICE YOU WISH TO CONNECT. YOUR DEVICE (CELLPHONE, COMPUTER, ETC.) WILL AUTOMATICALLY BEGIN SCANNING FOR NEARBY BLUETOOTH DEVICES.
3. TAP THE ENTRY FOR THE BLUETOOTH ACCESSORY WHEN YOUR DEVICE HAS DETECTED THE SPEAKER AND DISPLAYED ON THE SPEAKER SCREEN. BLUETOOTH IS NOW READY TO OPERATE.

True Wireless Stereo(TWS) Function

• TWS allows you to connect 2 speakers Via Bluetooth with TWS technology so they can play at the same time and you can double your audio output.
• Long press(3 seconds) the “TWS” key in bluetooth MODE then turn on the TWS function, Long press again (3 seconds) the “TWS” key to turn off the TWS function

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
RF Exposure
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment can be used as portable exposure without any restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>