Aquafire AWO-16-42 23 Inch Freestanding Electric Firebox User Guide

Aquafire AWO-16-42 23 Inch Freestanding Electric Firebox

Product Information

• Specifications:
  • Product Name: Aquafire Lite Series AWO-16-42
  • Model: AWO-16-42-GAT
  • Power Adapter: 24V

Product Usage Instructions

• Installation:
  • Remove the top plate of the fireplace.
  • Connect the 24V power adapter located on the back side of the unit.
  • Install Aquafire Lite into its housing as shown in the example.
  • Reinstall the top plate to complete the installation.
• Filling the Aquafire Lite:
  • Option 1: with Automatic Pump
  • Place the filter end of the fill tube in your water source.
  • Connect the other end of the fill tube to the water inlet port.
  • Press and hold the B1 button for 5 seconds to begin filling.
  • The pump will stop automatically when the tank is full.
  • Option 2: with Remote Control
  • Follow steps 1 and 2 from Option 1.
  • Press and hold the ‘filling’ button on the remote for 5 seconds to begin filling.
  • The pump will stop automatically when the tank is full.
• Pairing the Remote:
  • Press and hold the Power button on the unit until it starts flashing.
  • Press any button on the remote; you will hear a beep.
  • The beep confirms that the remote is paired with the fireplace unit.
• Draining the Fireplace:
  • Place a water bucket under the bottom of the device.
  • Remove the drain plug located under the fireplace to drain the water.

INSTALLATION

Install Aquafire Lite Into Its Enclosure

1. Remove the top plate.
2. Connect the 24V power adapter (located on the back side of the unit).
3. Install Aquafire Lite into its housing, as shown in the example below.
4. Reinstall the top plate of the fireplace and the installation is complete.

Fill Aquafire Lite With Tap Water

• Option 1: with Automatic Pump

1. Place the filter end of the fill tube in your water source.
2. Connect the other end of the fill tube to the water inlet port.
3. Press and hold the “B1” button for 5 seconds to begin filling.
4. The pump will stop automatically when the tank is full.

• Option 2: with Remote Control

1. Place the filter end of the fill tube in your water source.
2. Connect the other end of the fill tube to the water inlet port.
3. Press and hold the ‘filling’ button on the remote for 5 seconds to begin.
4. The pump will stop automatically when the tank is full.

How to Pair Remote

1. Press and hold the Power button on the unit for 5 seconds or until the button will begins flashing.
2. Press any button on the remote, you will hear a beep.
3. A beep confirms the control is paired to the fireplace unit.

How to Drain Fireplace

1. Prepare a waterbuck under the bottom of the device.
2. Remove the drain plug located under the fireplace.

For additional questions please visit our support center at www.aquafire.com/help.

• Aquafire Lite Series
• AWO-16-42
• AWO-16-42-GAT

References

• Aquafire Help Center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>