tuya 1CH WIFI Curtain Module Instruction Manual

WIFI Curtain Module
1CH,2CH
INSTRUCTION MANUAL

MANUAL OVERRIDE

The Curtain module terminal reserves the access of manual override function fort he end-user to switch on/off.

• If you have connected the wall push-button, check its work.

Single pressing ofthe “down” button / “up” button, will cause that the roller shutters moves in the desired direction to the end position. If the electric shutter goes in the opposite direction to the expected,select “motor reversal” in the “More”op-tion. When the electric shutter is moving up, press-ing “up” button switches causes that the shutter will stop immediately; when the electric shutter is moving down, pressing “down” button switches causes that the shutter will stop immediately.
Notes:

1. Both the adjustm ent on App and Curtani can overwrite each other, hte last adjusmten t rem ains ni memory .
2. The App control is synchronized with the manual switch.
3. Traditional switch selection button type.

TECHNICAL SPECIFICATIONS

with mounting clip

Wiring Instructions and Diagrams

1. Turn off the power supply before carrying out any electrical installation work.
2. Connect wires according to the wiring diagram.
3. Insert the module into the junction box.
4. Turn on the power supply and follow switch module configuration instructions.

Notes: Take your smartphone close to the switch module when you’re configuring, and make sure you have min. 50% Wi-Fi signal. Global international operation Whenever & Wherever You are,All-in-one Mobile App

| | |
---|---|---|---
Schedule timer| Voice control-work with google home| Voice control-work with Amazon Alexa| Device Sharing

Inhouse local operation 1CH WIFI Curtain Module

2CH WIFI Curtain Module

INSTALLATION

Warnings:

1. Installation must be carried out by a qualified electrician in accordance with local regulations.
2. Keep the device out of reach of children.
3. Keep the device away from water , damp or hot environment.
4. Install the device away from strong signal sources such as microwave oven that may cause signal interruption resulted to abnormal operation of the device.
5. Obstruction by concrete wall or metallic materials may reduce the effective operation range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify the device.

FAQ

Q1: What should I do if I can’t configure the switch module?

a. Please check whether device is powered on. b. Make sure your mobile and switch module are under the same 2.4 Ghz WIFI network. c. Whether it’s in good internet conditions. d. Make sure the password entered in App is correct. e. Make sure the wiring is correct.

Q2: What happens if the WIFI goes off?

You can still control the device connected the switch module with your traditional switch and once WIFI is active again the device connected to module will connect automatically to your WIFI network.

Q3: What should I do if I change the WIFI network or change the password?

You have to re-connect our Wi-Fi switch module to the new Wi-Fi network accordingly as per the App User Manual.

Q4: How do I reset the device?

a . Power on/off device for 5 times until the indicator light fiash. b . press the reset key for about 10 seconds or turn on/off the traditional switch for 5 times until the indicator light inside the module is flashing quickly for pairing.

1. Scan the QR code to download Tuya Smart App, or you can also search keyword “Tuya Smart” at App Store or Googleplay to download App.http://smart.tuya.com/download

2. Log in or register your account with your mobile number or e-mail address.Type in the verification code sent to your mobile or mail box, then set your login password. Click “Create Family” to enter into the APP.

3. After the wiring of switch module is done, press the reset key for about 10 seconds or (1CH:turn on/off the traditional switch for 5 times,2CH:press the traditional switch for about 10 seconds) until the indicator light inside the module is flashing quickly for pairing.

4. 1,Support multi-protocol matching : WIFI/Bluetooth.
   2,Turn on Bluetooth,Click “+” , follow the on-screen instruction for paring.

5. The connecting will take about 10-120 seconds to complete depending on your network condition.

6. Finally, you can control the device via your mobile phone.

7. Connect to amazon alexa or Google Assistant for voice control, or share the devices with your families or friends.

8. Enjoy your smart life of home automation for lighting control by using our All-in-one mobile app wherever you are in the world or simply by voice control when you are sitting at home comfortably.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>