Yuhong S026 Switch Pro Wireless Controller User Guide

Yuhong S026 Switch Pro Wireless Controller

Product Information

Specifications

• Wireless Controller for Switch
• 4 LED indicators for player number and low battery status
• Sleep Function, automatic POWER OFF
• 600mAh rechargeable battery pack
• Charged using type-c plug in the controller
• Wide range: up to 8m approx.

FAQ

• Q: Can this controller be used with any other gaming consoles?
  • A: No, this controller is specifically designed for use with the Switch.
• Q: How do I reset the controller?
  • A: To reset the controller, refer to the Reset function in the user manual.
• Q: What should I do if the battery is low?
  • A: Recharge the battery using the type-c plug in the controller to ensure uninterrupted gameplay.

Pack Contents

• 1 x Switch controller
• 1 x 1.2 M Charging Cable
• 1 x User Manual

Products Features

• Wireless Controller for Switch.
• Includes 4 LED indicators to indicate the connection port(player number) and the battery low power status.
• Sleep Function,automatic POWER OFF.
• 600mAh rechargeable battery pack,it is charged using the type-c plug in the controller.
• Wide range: up to 8m approx.

How to complete the first connection

• At the first time of connecting this controller to Switch, you have two Options.
• Option 1: Via Type-C cable
  1. Connect this controller to the dock by a type-c cable, wait till one channel light keep on
  2. Plug out the type-c cable ,controller channel light will flash (waiting to pair), wait till one channel light keep on, then connection succeed.
• Option 2: Wireless connection
  • Please operate your console as following: System Settings—–>Controllers and Sensors—–>Change Grip/Order.
  • Long press controller Home button for 5 seconds channel light will flash(waiting to pair).wait till one channel light keep on, then connection succeed.

TROUBLE SHOOTING for first connection

Solution 1: When your controller has been connected, please just press [A Button] one time to confirm.

• If you press two times A button,controller connected will be disconnected.
• [Change Grip/Order] means disconnect all the controllers that has been connected.
• After you connected your controller and return to this step, please DO NOT press [A button] again, you can press [B button] or [Home button]

Solution 2: Because Bluetooth Pairing Problems between NS Switch and controller, If you can’t finish the first connection, please restart your NS Switch as below and try again.

• Hold the power button located on the top of the Switch for around 5 seconds
• Under sleep mode, you will see “Power Options”
• Under Power Options, you can choose to restart or turn the power off

How to wake up your controller And Automatic Power off

How to wake up your controller

• When controller is in the status of powering off, you should wake up your controller with short press Home ,LED channel light 1-4 will blink

Automatic Power off & Sleep Function

Battery Precaution And Reset function

Battery Warnings

• This controller works ONLY with the battery pack LI-ON 3.7V/600mAh built-in.
• Do not use the product if it appears to be damaged or leaking,showing discoloration,shape or any other changes.
• If battery leakage occurs avoid contact with skin,cloths,and wipe off any deposit.If contact occurs,immediately wash thoroughly and check with a doctor.
• Make sure you keep the controller,clean and dry,away form liquids,dust and dirty.Do not expose it to extreme weather conditions(heat and cold)or extreme fluctuations in air moisture.
• This product is ONLY for HOME use only.Recycle it accordingly,not into domestic waste.

Reset function

• When the controller is out of order, which can be reset by poking the reset key at the back of it

Charging Indicator

Specification

How to upgrade your switch controller

• When Nintendo updates the system in the future, In order to prevent mismatch between system and controller. We’ll also provide upgrading programmes
• Note: If your controller work well with NS Switch, DO NOT update your controller, which maybe cause controller’s system confusion
• We’ll upload the programme and data to the website as below Website: www.haihonggames.com

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Nintendo and Switch are registered trademark or a trademark of Nintendo Inc. in the Japan and / or other countries. This product is not designed, manufactured, approved, sponsored or endorsed by Nintendo. All trademarks belong to their respective owners.

MADE IN CHINA

References

• Shenzhen HaiHongChang Electronics Co.,Ltd.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>