SENCOR 65MUS700TCSB Vidaa Smart TV User Manual
- June 1, 2024
- SENCOR
Table of Contents
SENCOR 65MUS700TCSB Vidaa Smart TV
Specifications
- Model Numbers: SLE 65MUS700TCSBEN, SLE 55MUS700TCSB, SLE 43US700TCSB
- Product Type: VIDAA SMART TV
Product Usage Instructions
Safety Instructions
To properly use the product, carefully read the user manual and keep it for future reference. When transferring ownership of the device, ensure to include all documentation.
When assembling the stand, use the recommended screws and ensure correct connection for stability. Connect the TV to the power supply.
Ensure to follow safety symbols on the device for precautions against electric shock and important operation instructions.
Inserting Batteries
To insert batteries, remove the back cover and insert two AAA size batteries. Replace the cover securely to prevent leaks or bursting.
Avoid exposing the device to moisture or excessive heat to prevent fire or electric shock.
Remote Control Functions
- INPUT: Select input source
- POWER: Switch stand-by on/off
- NUMBER KEYS: Direct station selection
- GUIDE: Display programme information
- CH.LIST: Open channel list
- COLOUR BUTTONS: Menu/Teletext functions
- MENU: Open on-screen menu
- : Playback control during media playback
- ARROW KEYS: Navigate menus
- OK: Confirm selection
- BACK: Go back to previous menu
- EXIT: Exit menu or SMART function
FAQs
- Q: Where can I find the detailed safety information?
- A: The detailed safety information can be found in the full user manual available on the website www.sencor.com.
- Q: What should I do if I encounter issues with the TV?
- A: For repairs and service, contact an authorized service center. Do not attempt to repair the TV yourself.
“`
SLE 65MUS700TCSBEN SLE 55MUS700TCSB SLE 43US700TCSB
EN User Manual CZ Uzivatelská pírucka SK Pouzívateská prírucka HU Felhasználói kézikönyv PL Podrcznik uytkownika
VIDAA SMART TV VIDAA SMART TV VIDAA SMART TV VIDAA SMART TV VIDAA SMART TV
EN Tip: Operating your TV is facilitated by the context help in the menu. The
user’s manual can be found under Settings/ Support (this may not be available
for all menu languages).
Disclaimer: Images throughout this document are for illustrative purposes only
and may differ from the actual product. Parts of the software function change
with the system upgrade.
Safety instructions
To be able to use this product properly, read this user’s manual carefully and keep it for future reference. If you plan to give (sell) this device to a third person, include all documentation, including this manual, with the transaction.
Assembling the stand and connection
For stand attach use the supplied or recommended screws. Make sure that the
supports are connected correctly so that the TV is stable. You can then
connect the TV to the power supply.
The lightning symbol inside a triangle indicates the device has dangerous voltage that may cause electric shock.
The exclamation point symbol inside an isosceles triangle indicates important
operation and repair instructions in the included device documentation.
ATTENTION
RISK OF ELECTRIC SHOCK DO NOT OPEN!
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK SIDE).
THERE ARE NO PARTS INSIDE
WHICH COULD BE REPAIRED BY THE USER. FOR REPAIRS AND SERVICE, CONTACT AN
AUTHORIZED SERVICE CENTRE.
Insert batteries
To open the battery compartment, remove the back cover. Insert two batteries
size AAA. Replace the cover.
The incorrect use of batteries can result in leaks or bursting. Be sure to
follow these instructions:
· Place “AAA” batteries matching the (+) and () signs on each battery to the
(+) and () signs of the battery compartment.
· Do not mix battery types. · Do not combine new batteries with used ones. It
causes shorter
life or leakage of batteries. · Remove the dead batteries immediately to
prevent them from liquid leaking in the battery compartment. Don’t touch
exposed battery acid, as it can damage your skin. · If you do not intend to
use the remote control for a long period, remove the batteries.
WARNING:
To prevent risk of fire or electric shock, do not expose the device to rain or
moisture. The batteries must not be exposed to excessive heat, for example
sunlight, fire, etc.
This symbol indicates the device has double insulation between dangerous
voltage from the network and useraccessible parts. Replace parts with
identical spare parts only
· Do not leave a static image on the LCD panel for more than 2 hours. This may
result in a damaged panel.
· LCD screens are made using precision technology to provide even the finest
image details. Several defective pixels can appear on the screen from time to
time, indicated as red, blue, green or black dots (up to 0.001% of the total
pixel count of the screen). This does not affect the characteristics and the
effectiveness of your TV set.
Before using, read the detailed safety information in full user manual available at websites www.sencor.com
4
EN
Functions of the remote control
1. INPUT: Select input source
2. POWER: Switch stand-by on/off
1
2 3. NUMBER KEYS: Direct station selection
4. GUIDE: Display programme information of the current pro-
3
gramme and subsequent programmes
5. CH.LIST: In TV mode: Open channel list
6. COLOUR BUTTONS:
In the menu: Menu functions as shown.
In TV Teletext mode: Teletext functions as displayed.
7. MENU: Open on-screen menu
4
5 8. : Playback control during media playback (without func-
tion in TV mode)
6
9. ARROW KEYS: Move in the menus
7
8 10. OK: Confirm selection 11. BACK: Back to the previous menu.
12. EXIT: To exit the menu or a SMART function Exit.
9
0 13. VOL+/-: To adjust the volume
14. HOME: Open Internet functions
qs 15. CH /: To change the programmes
qa
qf 16. VOICE: Holding down the Voice button activates the VIDAA-enabled microphone on the remote, and initiates
voice input. Releasing the Voice button ends voice input. With
VIDAA, you can use your voice to search for content, control
qd
qg
playback, and more. (VIDAA Voice Service requires Internet
connection)
qj
qh 17. SUBTITLE: To switch between different subtitles
ql 18. MUTE: Mute Sound
qk
19. TEXT: In TV mode: Open Teletext
wa 20. FREE: Open VIDAA Free Portal
ws 21. EDIT: Open editing menu
w; wd
22. DEEZER: Open Deezer
wh 23. NETFLIX: Open Netflix wj 24. YouTube: Open YouTube
wf
25. BROWSER: Open Internet Browser
wg
wk 26. Prime Video: Open Prime Video 27. PLEX: Open Plex
28. MEDIA: Open all units
5
EN
Live TV
Channel Scan
You can scan for channels automatically or manually.
NOTE
Satellite/antenna/cable function may not be applicable in some
models/countries/regions.
Auto Scan
Automatic channel scan.
TV
Alternatively, in Live TV, > Settings > Channel > Auto Scan.
If no TV channels were saved before, you will be prompted to do a channel search.
Satellite · Single satellite: You can use single satellite if you only have
one satellite equipped. · DiSEqC: You can choose DiSEqC if you have DiSEqC equip-
ment. Up to four satellites in DiSEqC 1.0 mode can be installed. If you are using a motorised antenna, you can use DiSEqC 1.2 mode. · Unicable: If your home is equipped with Unicable satellite distribution, you should use this option. Please make sure that you know the Unicable band and frequency to be used. The information should be available on the equipment or the landlord can provide it.
Antenna · Channel: Select from All Channels or Free Channels. This
option may not be available depending on countries/regions/ operators. · Scan Mode: Select from digital channels only (DTV), digital and analogue channels (DTV+ATV) or analogue channels only (ATV). If you receive DVB-T or DVB-T2 signal, you can use DTV. · LCN: Switch on/off LCN (Logical Channel Number). Please note that some operators are restricted to manually change the channel order. If you switch off LCN, then the channel list can be edited after channel scan. This function may not be applicable in some models/countries/regions.
Cable · Channel: Select from All Channels or Free Channels. This
option may not be available depending on countries/regions/ operators. · Scan Mode: Select from digital channels only (DTV), digital and analogue channels (DTV+ATV) or analogue channels only (ATV). · LCN: Switch on/off LCN (Logical Channel Number). Please note that some operators are restricted to manually change the channel order. If you switch off LCN, then the channel list can be edited after channel scan. This function may not be applicable in some models/countries/regions.
Manual Scan Manually scan for channels for DTV or ATV.
In Live TV, > Settings > Channel > Advanced Settings > Manual
Scan DTV Manual Scan Manually scan for DTV services. When the DTV Manual Scan
screen appears, press / button to select Antenna, Cable or Satellite, and
select Start to commence the search of that channel. When the signal has been
tuned, signal strength will be displayed on the screen.
ATV Manual Scan Manually scan for ATV services. · Frequency: Input the channel
frequency you want. · Picture System: Select the Colour System. · Sound
System: Select the Sound System.
Live TV tutorial After channel scanning has completed for the first time, the
Live TV operating tutorial will be displayed, this will include:
/ : Load the info bar
/ : Load the channel list
/ : Open the electronic programme guide (only available in some
models/countries/regions)
: Load on-screen menu
: Jump to the previous channel
NOTE The remote control buttons may vary depending on models/
countries/regions.
6
EN
Live TV
Channel List
Channel Edit
Displaying the channel list
In Live TV, press the / menu.
Alternatively, in Live TV,
button to display the Channel List > Channel List.
Entering the sub-menu of channel list
In Live TV, / >
Introducing the sub-menu
In Live TV, / >
Manually edit the channel list to your preference. Editing Live TV channels In
Live TV, press / > . to select a Live TV channel category such as Antenna or
Cable, then use D-pad to select Edit.
Alternatively, in Live TV, press button, select Settings > Channel > Channel
Edit, and select a Live TV channel category such as Antenna or Cable.
Cable
1 BBC
Cable
Logo
Channel
3D-HD
Logo
Channel
DX-HD
Logo
Channel
DX-HD1
Logo
Channel
3D-HD1
Logo
Channel
DX-HD2
Logo
Channel
3D-HD2
Logo
Channel
DX-HD3
DTV Cable FAV1
Filter SFeiltaerrch Edit
TV List Display Live TV channel categories, such as Cable and Antenna.
Fav Display favourite lists 1 to 4.
Filter Select channels by Content, HD, Child Lock, Scrambled and Sort. Some
options in Filter may not be available in some models/ countries/regions.
Search Call up search function.
Edit Edit the channel list.
NOTE The sub-menu options may vary depending on models/ count-
ries/regions.
Move
2 3D-HD 3 DX-HD
Delete
Deleted CH List
Filter
Search
· Press button on the selected channel, then a checkbox will appear.
You can select multiple channels at the same time to move or delete.
· Move: Press button to move the selected channel.
Moving the channels could be restricted by the operator. If you want to be
able to move channels, it is not recommended to choose an operator during
channel scan, and LCN should be set to Off.
· Delete: Press button to delete the selected channel.
· Restore: Press
[RED] button, or press / button to
display the colour menu and select RED to enter the list of delet-
ed channels. Press button to restore the deleted channel.
· Filter: Press
[YELLOW] button or press / button
to display the colour menu and select YELLOW, the filter screen
will pop up. Press button to select options, the channel list can then be updated.
· Search: Press
[BLUE] button or press / button to
display the colour menu and select BLUE to search for a channel.
Exporting to USB The current channel list can be exported to a USB storage device.
In Live TV, Export to USB
Settings > Channel > Channel Edit >
7
EN
Live TV
Importing from USB Previously exported channel lists can be imported via a USB
storage device.
In Live TV, > Settings > Channel > Channel Edit > Import from USB
Favourite
Adding a channel to a favourite list
1 In Live TV, press / button to display the channel list. 2 Press button and
select the channel(s) you want to
add to the favourite list. 3 Select Add to Favourite, and choose from
FAV1-FAV4. 4 Then, a heart-shape icon will appear next to the added channel.
Viewing your favourite list
In Live TV, press / > > Fav to display the favourite list.
Editing the favourite list
In Live TV, press / > > Fav > then use D-pad to select Edit.
to select FAV1-FAV4,
Alternatively, go to > Settings > Channel > Channel Edit, and select FAV1 –
FAV4.
You can add, move, or remove favourite channels.
FAV1
Add channels
1 BBC
2 3D-HD
Filter
Search
· Select Add channels to add the selected channel to the favourite list.
· Select a channel in a favourite list, and press it.
button to move
· Select a channel in a favourite list, and press remove it.
button to
NOTE
These steps should be operated under the TV input. Before you edit the
favourite lists, Channel Scan must be
completed first. You can add channels from various reception types to the
favourite list.
8
Guide (EPG)
The Guide (EPG) provides a convenient way to check TV programmes for the upcoming 7 days. The information displayed by the Guide (EPG) is made available by the commercial television networks for digital channels only. The Guide (EPG) also provides a simple way to record your favourite programmes and a reminder function, which can switch channels automatically at a scheduled time, so that you will not miss programmes of interest. The availability and amount of programme information will vary depending on the broadcaster.
NOTE The Guide (EPG) function is only available for digital channels.
Analogue channels are not supported.
In Live TV, press / button, or press (EPG) to display channel information Guide.
Guide
Watch
In Guide (EPG), when a current programme is selected, press > Watch to switch to the channel you want to see.
Reminder
In Guide (EPG), press / button to select the channels. Press / button to
select programme based on the time schedule.
Press button to select Reminder.
NOTE
Reminder in the Guide (EPG) is only available for programmes that have not
been aired yet.
Schedule
In Guide (EPG), press
[RED] button or press /
button to display the colour menu and select RED, to view a list
of scheduled reminders.
Programme Colour
In Guide (EPG), press
[GREEN] button or press /
button to display the colour menu and select GREEN, to choose
colours to indicate different genres in the Guide (EPG) for quick
and easy viewing.
(This function may not be applicable in certain countries/regions.)
24h-
In Guide (EPG), press
[YELLOW] button or press
/ button to display the colour menu and select YELLOW
to select programmes of the previous day.
24h+
In Guide (EPG), press
[BLUE] button or press /
button to display the colour menu and select BLUE to select
programmes of the next day.
EN
Multi-screen
Screen Sharing
Content Sharing
Mirror your mobile device screen to the TV. Before using Screen Sharing, please set your TV to the wireless network connection.
Screen Share 1 Turn on the casting function of your Android/Windows10 device.
The setting icon may vary depending on the device. The feature may be called “Wireless display”, “Smartview”, “Wireless projection”, etc. 2 Find the TV name in the searching list of your device and select it. Wait for the connection progress to complete and the content on your device will be displayed on the TV.
NOTE Some mobile devices may not support casting.
Content Sharing allows you to view media content, like videos, music or photos
saved in your Android/iOS/PC device on your TV screen.
Sharing media content from your Android/iOS/PC device 1 Connect your TV and
Android/iOS/PC device to the same net-
work.
2 Turn on Content Sharing at / > Settings > System > Application Settings >
Content Sharing.
3 Turn on the content sharing function in your Android/iOS/PC device.
4 Find the TV name in the searching list of your device and select it.
Wait for the connection progress to complete.
5 On your Android/iOS/PC device, choose the media content you want to share on
your TV.
Select a media content to play on the TV
Mirror the screen of your mobile device
Playing media content from your Android/iOS/PC device on the TV
You can connect media content saved in your Android/iOS/PC device to your
local network and play the content on your TV.
1 Connect your TV and Android/iOS/PC device to the same network.
2 Turn on Content Sharing at / >
Settings > System
Application Settings > Content Sharing.
3 Make sure your media content in your Android/iOS/PC device are visible through local network.
4 On your TV, select a device with media content at
/ > Input, or / > My Apps > Media. The media content list in your Android/iOS/PC device appears. 5 Select a media content item from the list to play.
NOTE
Some Android/iOS/PC devices may not support content sharing function. If your
device does not support content sharing, you can download an app that supports
the function to connect to your TV.
Content may not be played depending on the file format.
Content may not be played smoothly or the function may not work properly due
to the network condition.
9
EN
Smart Functions
Getting Familiar with the Home Screen
Press / screen.
button on your remote control to enter the Home
All TV functions can be accessed from the Home screen.
To exit the Home screen, press
button on your remote
or use the navigation buttons to move the cursor to th>e Input
icon on the top of the screen, press your desired input source.
button to enter, and select
Using the navigation bar The navigation bar refers to indicators and icons on
the top of the Home screen.
NOTE Indicators or icons may vary depending on models/countries/
regions.
Search Search the content you want.
Input Select the Input source depending on the device you have connected to
your TV.
Settings Manage TV configuration.
Notifications Allow pop-up notifications to appear for useful information and
events that occur with your TV, including: Advertising, New Arrivals, Warnings
and Legal Statements, System Messages and Alexa Notification. You can
enable/disable each of these notifications at Settings in the notification
centre. You can view the list of event messages generated by the TV. To delete
all notifications, select Clear All.
NOTE The Alexa Notification may not be applicable in some models/
countries/regions.
VIDAA Account Sign in to your VIDAA account. A VIDAA account provides all the
best features of your smart TV and ensures that all services are kept to date.
Time You can always view the current time at the top of the Home screen.
Using the Shortcuts
You can add inputs, channels and websites to the Home screen to have quick
access to them for your convenience.
Add inputs to the home screen
1 Press
button.
2 Move the focus to an input you want to add to the Home screen,
and press > Add to home > . The input icon will appear in Shortcuts on the Home screen.
NOTE
Some options in inputs source page cannot be added to the Home screen.
To remove inputs from Shortcuts, just move the focus to a short-
cut and press button on your remote control.
Add channels to the home screen
1 In Live TV, press / button to access the channel list.
2 Press button and press button to tick channel(s) that you would like to add
on the Home screen.
3 Select Add to home. The channel icon will appear in Shortcuts on the Home
screen.
NOTE To remove the channel from Shortcuts, just move the focus to
the shortcut and press button on your remote control.
Add webpages to the home screen 1 In Browser, visit a website you would like
to add on the Home
screen.
2 Use the D-pad to move the focus to Add to home icon in the top Browser
navigation bar and select it.
3 Select Add, and this webpage will appear in Shortcuts on the Home screen.
NOTE To remove webpages from Shortcuts, just move the focus on
a shortcut page and press button on your remote control.
Managing apps
/ > My Apps Select the item you want to move, press
button to
manage, then use the D-pad to select the desired position and
press button to store the new position.
Network Connect your TV to the Internet through a wireless connection or an Ethernet cable , and the corresponding icon will appear.
NOTE Some Apps may not be moved.
10
EN
Smart Functions
Using a VIDAA Account
Signing into an account Before signing into your VIDAA account, make sure your
TV is connected to the network.
1 Search File
2
USB
Grid
3 Name
4 All Media
1 After the network is connected, press / button on your
remote and select VIDAA Account icon in the top navigation bar on the Home
screen. 2 Register your device to your VIDAA Account. After entering your
E-mail and password, select Sign In.
Creating a new account If you do not have a VIDAA account, create a new one to
enjoy the best features of your Smart TV. Before creating a new account, make
sure your TV is connected to the network.
1 After the network is connected, press / button on your
remote and select VIDAA Account icon in the top navigation bar on the Home
screen. 2 Select Create an Account on screen. 3 Enter your first name, last
name, E-mail address and password. First Name and Last Name are optional. 4
Select Create an Account.
Media
/ > My Apps > Media Media is a central location for you to view or listen to
different types of content, such as photos, music and movies. You can view
media content through the following methods: A USB thumb drive or hard drive.
Compatible mobile phone, tablet or other personal devices: you
can stream movies, music and photos that are stored on compatible personal
device and play or view the content on your TV. By default, there is Content
Sharing displayed on the Media screen. If your mobile device is connected to
the TV, its name also appears on the Media screen.
Playing media contents
/ > My Apps > Media > connected devices Select the content you want to play on
the screen, like pictures, videos and music.
1
2
3
4
5
6
7
8
9
10
11
12
USB/
Press MENU to create list
5
1 Search the content you want to play. 2 Arrange the content list by Grid,
List. 3 Sort the content list by Name, Date modified, Size. 4 Filter the
content list by All Media, Photo, Video, Music, Recor-
ded. 5 Create a photo, music, or video playlist.
NOTE Some options in the above table may not be available in some
models/countries/regions.
Playing background music during viewing pictures 1 Choose a picture to
display. 2 Press / button to call out playbar. 3 Select Background Music and
choose your music to create a
Music Playlist.
Now you can play the background music during viewing pictures.
Media format list Due to differences in programming tools and other factors,
some of the file formats that are listed may not be supported.
Video Format
Container
Video Codec
File Extension Name
Resolution and Frame Rate
MPEG
Mpeg1/2
.mpg .mpeg .vob 1920 × 1080p @ 120fps
Mpeg4
MP4
Mpeg4
.mp4 .mov
1920 × 1080p @ 120fps
H.264 (AVC)
1920 × 1080p @ 60fps
H.265 (HEVC)
MKV
Mpeg1/2 .mkv
1920 × 1080p @ 120fps
Mpeg4
H.264 (AVC)
1920 × 1080p @ 60fps
H.265 (HEVC)
AVI
Mpeg1/2 .avi
1920 × 1080p @ 120fps
Mpeg4
H.264 (AVC)
1920 × 1080p @ 60fps
WMV
WMV3
.asf .wmv
1920 × 1080p @ 60fps
H.264 (AVC)
FLV
H.264 (AVC) .flv
1920 × 1080p @ 60fps
TS
H.265 (HEVC) .ts
1920 × 1080p @ 60fps
11
EN
Smart Functions
Audio Format
Container WAV MP3
AAC WMA
PCM
AC-3 FLAC OPUS
Audio Codec
Mpeg1/2 Layer 1 Mpeg1/2 Layer 2 Mpeg1/2 Layer 3 AAC, HEAAC WMA WMA Pro LPCM
ADPCM AC-3 FLAC OPUS
File Extension Name .wav .mp3
.m4a .aac .wma
N/A
.ac3 .m4a .flac .opus
Photo Format
Container File Extension Name Mode of Operation Resolution
JPEG
PNG
BMP GIF
.jpg .jpeg
.png
.bmp .gif
base-line progressive no-interlace interlace –
15360 × 8640 1024 × 768 3840 × 2160 1200 × 800 3840 × 2160 6400 × 4800
App
/ > My Apps
Numerous factory-installed apps are available for you to choose for your
entertainment preferences.
Installing an app Even though your TV has numerous factory-installed apps,
there may be others that you would like to download.
To install an app:
1
/ > My Apps > APP STORE.
2 Use the navigation buttons on your remote to select the app that you want to install.
3 Select Install. The selected app is installed on the TV.
NOTE
To use this function, your TV must be connected to the Internet. Adding apps
is free, but it might cost you money when using
some apps.
Sorting apps in My Apps 1 In My Apps select the app you want to sort, and then
press
button to select Sort.
2 Press / / / button to move it.
3 Press button to store the new position.
NOTE Some Apps may not be moved.
Removing an app in My Apps You can only delete apps that you have installed to
the TV. Factory-installed apps cannot be deleted. 1 In My Apps select the app
you want to remove, and then press
button to select Remove.
2 Select . The selected app is deleted.
Installing Mobile App to Control your TV
Press / button to select Settings icon, and select Support > Mobile App
Download. Scan the Mobile App download QR code on screen to install the app on
your mobile device. It is possible to control your TV, such as turning the TV
on or off, inputting characters with your mobile’s keyboard and sharing
pictures or videos from your mobile device to the TV. This app is available on
both Android and iOS. To connect your TV after installing the mobile app: 1
Agree with end user license, and disclaimer and privacy policies
on TV. If you are not sure whether you have agreed, check at
/ > Settings > Support > Disclaimer and Privacy. 2 Make sure your mobile phone
and TV are connected to the same
network environment. 3 To use this function, switch on Content Sharing at
/ > Settings > System > Application Settings > Content Sharing. 4 Open the
mobile app and select the TV device you want to connect.
12
EN
Picture and Sound
Adjusting the Picture Quality
Adjust picture mode, picture size and other advanced picture settings.
Choosing a picture mode
/ > Settings > Picture > Picture Mode Select a pre-set picture mode to best
suit the content you are viewing. Options may differ depending on your
model/country/region and the content you are watching. Please refer to the
specific product.
Standard Use Standard mode for watching normal content, such as News, Drama or
Documentaries.
Cinema Day Use Cinema Day for watching movies in a bright environment.
Cinema Night Use Cinema Night for watching movies in a dark environment.
Dynamic Use Dynamic mode for content that requires vivid picture quality.
Sports Optimised picture for watching sports.
Changing the aspect ratio
/ > Settings > Picture > Aspect Ratio Adjust the Aspect Ratio to stretch or
zoom the picture.
Automatic Automatically switch Aspect Ratio between 16:9 and 4:3 based on the
signal information.
16:9 Best suited for 16:9 Widescreen content. This will also stretch 4:3
content to Widescreen.
4:3 Best suited for 4:3 content.
Panoramic Provides a full-screen image by stretching the edges of the picture,
the middle section of the picture will not be stretched.
Movie Zoom Fill the entire screen by zooming in to remove horizontal black
bars from the top and bottom of the picture.
Direct Point to point display also known as 1:1 Pixel Mapping.
Configuring advanced picture settings
/ > Settings > Picture > Picture Mode Settings Adjust display settings for
each Picture Mode. You can personalise the picture quality by adjusting the
following settings.
Apply Picture Settings Adjust current picture mode to apply to all sources or
just current source.
Backlight Set the overall brightness of the screen.
NOTE The function name may vary depending on models.
The following option may differ depending on models. Please refer to the
actual product. Dynamic Backlight Control Enhance the contrast ratio between
light and dark areas of the picture. This function may not be applicable in
some models/countries/ regions. Backlight Adjust how bright you want images to
appear, lower settings create darker images (only when Dynamic Backlight
Control is off ). This function may not be applicable in some
models/countries/ regions.
Brightness Adjust the Brightness level to generate lighter or darker images.
Contrast Adjust the Contrast level to increase or decrease how bright images
appear.
Colour Saturation Adjust the colour intensity of the picture for a more
vibrant image.
Sharpness Adjust how sharp or soft edges of images appear.
Adaptive Contrast Automatically adjust dark areas and light areas of the image
to see more detail.
13
EN
Picture and Sound
Noise Reduction Improve the picture quality by reducing noise.
MPEG Noise Reduction Reduce MPEG block noise to provide clearer edge
transitions.
Colour Temperature Adjust how warm (red) or cool (blue) the white areas of an
image appears.
Expert Settings Adjust advanced picture settings based on your viewing
preference.
Overscan Change the video size setting to crop the edges of the displayed
image. This function may not be applicable in some models/countries/ regions.
Reset Current Mode Restore all the picture settings in the current picture
mode to the factory default values.
Configuring expert settings
/ > Settings > Picture > Picture Mode Settings > Expert Settings Advanced
picture settings.
Colour Tuner Adjust the Hue, Saturation and Brightness of colour settings.
White Balance Adjust the intensity of red, green and blue lights to view the
true colours of all images in the picture.
Black Level Adjust the HDMI Black Level to enhance current content.
Gamma Adjustment Adjust the Gamma to alter how the TV will respond to
grayscale content. In low ambient light choose a higher number, in brighter
ambient light select a lower number. The default setting of 2.2 is recommended
for most ambient light conditions. This function may not be applicable in some
models/countries/ regions.
Gamma Calibration Adjust selected Gamma curve. This function may not be
applicable in some models/countries/ regions.
RGB Only Mode RGB filter for adjustment and control of colour space and colour
saturation.
Game Mode Settings
Enabling game mode
/ > Settings > Picture > Game Mode Enable Game Mode to optimise the TV’s
settings to enjoy a better gaming experience with a PC or a game console
connected to the TV. Game Mode will allow: Reducing input lag to make sure
every press or click matches
what is happening on the screen; Improving responsiveness to produce very
little motion blur; Processing YUV 4:4:4 format signals precisely to present
accurate
image colours.
NOTE This function may not be applicable in some input sources or
applications.
Adjusting the Sound Quality
Adjust sound mode and other advanced sound settings.
Choosing a sound mode
/ > Settings > Sound > Sound Mode Select a pre-set sound mode to suit the type
of content you are listening to.
Standard In Standard mode, the TV delivers a flat frequency response, which
preserves the natural characteristics of the original sound.
Theatre Theatre mode increases the surround sound effect and provides a more
prominent bass response.
Music In Music mode, low and high frequencies are emphasised to enhance
musical instrument reproduction.
Speech In Speech mode, low and high frequencies are attenuated to improve the
reproduction and clarity of the human voice.
Late Night In Late Night mode, the TV will improve the reproduction and
clarity of the human voice with a low volume level.
Sports Optimised sound for watching Sports events.
14
EN
Picture and Sound
Configuring advanced sound settings
/ > Settings > Sound > Sound Mode Settings Adjust the audio settings of the
TV. You can personalise the sound quality by adjusting the following settings.
Apply Audio Settings Adjust current sound mode to apply to all sources or just
the current source.
Equalizer Boost the volume at different frequencies. This function is only
applicable when TV Speakers is selected at
/ > Settings > Sound > Speakers > Audio Output.
Wall Mount Setup Automatically optimise the sound based on the position of the
TV. This function may not be applicable in certain models/countries/ regions.
Auto Volume Control Activate to prevent the volume from changing when
switching TV channels. This function may not be applicable in certain
models/countries/ regions.
Reset Current Mode Restore all of the audio settings in the current audio mode
to the factory default values. NOTE Some models may not support decoding of
DTS CD bitstreams. Playback of this format may produce undesirable noise.
Speakers Settings
/ > Settings > Sound > Speakers Adjust the settings of speakers. Audio Output
Select the speakers which you want to use. Digital Audio Output Select the
digital audio output format that best suits the audio device type.
Auto: the audio device automatically outputs in a supported format. Pass
Through: the audio device outputs without any processing. PCM: the audio
device outputs PCM (pulse code modulation) format. Dolby Digital: the audio
device outputs Dolby Digital audio when connected to the TV via optical port.
Dolby Digital Plus: the audio device outputs Dolby Digital Plus audio when
connected to the TV via HDMI (ARC/eARC) port.
When external audio devices are connected to the TV via optical, PCM and Dolby
Digital are suggested.
Digital Audio Delay Adjust the digital audio output delay time to sync audio
from an external speaker with the images on the TV.
This function is only applicable when / > Settings > Sound > Speakers > Audio
Output is set to ARC or SPDIF Only.
Lip Sync Synchronise the video and audio. This function may not be applicable
in some Audio Output modes.
Balance Adjust the left and right speaker level to optimise audio for a
specific location. This function may not be applicable in some Audio Output
modes.
Using Headphones
/ > Settings > Sound > Headphone Set the sound output mode through headphones.
After connecting your headphone, or other external audio amplifiers, you can
set up your TV to your preference. This function may not be applicable in some
models/countries/ regions.
Headphone Mode Change Headphone audio settings. Headphone Only, the TV
speakers will be muted when the headphones are being used. Any other connected
audio devices will also be muted when headphones are in use. Headphone with
Speakers, the TV speakers, headphones and other connected audio devices will
have audio output.
Headphone Volume Independently adjust the volume of the Headphones. In
Headphone Only mode, you can adjust the volume by the remote or in Headphone
Volume menu on screen. In Headphone with Speakers mode, the TV speaker volume
can be adjusted by the remote. The volume of headphone can be adjusted in
Headphone Volume menu on screen.
NOTE
This function is only applicable when / > Settings > Sound > Speakers > Audio
Output is set to ARC or SPDIF Only.
15
EN
Accessibility and System
Accessibility
Using Timer
/ > Settings > Accessibility Accessibility function provides menu options and
audio description to aid the visually or hearing impaired.
Menu Scheme Select menu scheme style from Dark, Light. High Contrast Menu
Improve contrast for visually impaired. Menu Transparency Select menu
transparency from Off, Medium, High. Closed captions Specialised captions can
be switched on or off if broadcast along with your program. Audio Type Audio
Type Accessibility audio settings. Voiceover Volume Independently adjust
voiceover level.
NOTE The above functions may not be applicable in some models/
countries/regions.
Setting Time
/ > Settings > System > Timer Settings Adjust the timer settings to suit your
preference.
Sleep Timer Set the sleep timer to automatically turn the TV off at the
specified time.
Power On Timer Set the time you want the TV to turn on automatically. You can
set the same time each day or set a different time on different days.
Power Off Timer Set the time you want the TV to turn off automatically. You
can set the same time each day or set a different time on different days.
Menu Timeout Set the amount of time you would like the menu to remain on the
screen.
Auto Sleep Set the amount of time that you would like the TV to auto power off
after a period of no activity. This function may not be applicable in some
models/countries/ regions.
Auto Standby with No Signal TV will go to standby if there is no signal after
the set time.
/ > System > Time Set the current time based on your location.
Time Format Set the time display to be 12 or 24-hour format.
Date/Time Set the Date and Time. You can set the date and time to
automatically sync with Internet/broadcast or manually setup by yourself. This
function may not be applicable in some models/countries/ regions.
Time Zone Select your time zone. This function may not be applicable in some
models/countries/ regions.
Daylight Saving Select whether to apply Daylight Saving Time to the TV. This
function may not be applicable in some models/countries/ regions.
Using Parental Controls
/ > Settings > System > Parental Control Turn on Parental Control to prevent
children from being able to view certain content. If you have not set the PIN
code before, create and confirm PIN window displays. Using the D-pad on your
remote, create the PIN code. If you have set the PIN code before, enter PIN
window will be displayed.
Set PIN code at / > Settings > System > System PIN.
Locks Turn on Locks to enable the Parental Control function. You will see
other Parental Control settings change from a greyed out state to highlighted.
When this occurs, Block Time, Channel Block, Content Block, Input Block, App
Block, or Reset to Default features are available to set.
Block Time Block the whole TV usage for a defined period of time, including
Live TV, HDMI and apps.
Channel Block Block all or individual channels when you turn on the Parental
Control feature.
16
EN
Accessibility and System
Content Block Certain programmes are blocked by age rating. This is controlled
by the broadcaster.
Input Block Block content from devices that are connected to external inputs.
App Block Block access to certain apps.
Reset to Default Restore Parental Control back to the factory default setting.
When Store Mode is selected, press button on your remote control to enter
store mode settings. If you want to switch to Home Mode when the TV is in
Store Mode, press / button to select Settings, and select System > Usage Mode,
and choose Home Mode.
NOTE Enabling Store Mode could increase energy consumption.
Checking the Software Version
Setting Language and Location
/ > Settings > System > Language and Location Select the language used for
this TV and your location.
Location Choose the location from where you will watch your TV. Menu Language
Set the default language for the TV menu. Primary Audio Set the default audio
output language for the type of digital broadcast content that you are
viewing. Secondary Audio Set the secondary audio output language for digital
broadcast content. Primary Subtitle Set the default subtitle language for
digital broadcast content. Secondary Subtitle Set the secondary subtitle
language for digital broadcast content. Digital Teletext Adjust Teletext
decoding.
Setting Usage Mode
/ > Settings > System > Usage Mode Set the TV to use in Home or Store mode.
Home Mode Select Home Mode for normal TV usage. If you want to switch to Store
Mode when the TV is in Home Mode, press / button to select Settings, and
select System > Usage Mode, and choose Store Mode. Store Mode Select Store
Mode to setup the TV in a retail setting. This mode enables E-Pos and other
demo functions and is only intended for use in retail stores.
To check the current software version of your TV:
Access / > Settings > Support > System Info > Version.
Software Upgrade
/ > Settings > Support > System Upgrade Set your TV to receive the latest
firmware.
Auto Firmware Upgrade Set your TV to automatically receive the latest
firmware.
Check Firmware Upgrade Check to ensure that your TV has received the latest
firmware. Please ensure your TV is connected to the Internet.
Check OAD Upgrade Check to ensure that your TV has received the latest
firmware via the tuner.
NOTE Please ensure your TV is connected to the Internet. This function is only
applicable when Thailand and Malaysia are
selected in Location.
System App Auto Upgrade Set your system applications to automatically upgrade
to the latest version. App auto upgrade will be completed in the background,
confirmation on new Privacy Notices may be required to complete any upgrades.
Upgrade from USB Upgrade TV software from USB device.
NOTE Please ensure the USB flash drive insert to USB 2.0 port of the TV. The
update files must be located in the root directory of the
update USB device. The format of the USB must be FAT32 and the partition table
type must be MBR.
17
EN
Accessibility and System
HbbTV
Access service from providers through HbbTV.
/ > Settings > System > Application Settings
HbbTV Enable or disable HbbTV functionality for all channels (only available for digital channels). In Live TV, press button to select HbbTV. Enable or disable HbbTV functionality for the current channel (only available for digital channels). When HbbTV service is enabled and the programme supports HbbTV, follow the instructions on the TV screen to select the corresponding button on the remote control to access the service.
NOTE This function may not be applicable in some models/countries/
regions. Some channels may not support the HbbTV service.
Setting the TV Name
/ > Settings > System > Advanced Settings > TV Name You can edit the name for
your TV to be used on the network.
NOTE Up to 18 characters can be entered.
Reset to Factory Default
/ > Default
Settings > Support > Reset to Factory
Restore your TV to the factory default. Reset will clear your personal settings, information and data.
18
EN
Technical Specifications
Model
Panel size Power consumption Standby consumption Rated voltage Remote
controller VESA wall mount Dimensions with stand (w × h × d) Dimensions
without stand (w × h × d) Net weight with stand Connection RF IN HDMI Optical
AV in Composite in Headphone out USB RJ45 Earphone Output
Supported USB formats
CI slot Other functions Resolution Viewing angle Embedded tuner Video system
Progressive scan Timeshift EPG Comb filter
OSD menu
Zoom Noise reduction Timer OFF / ON / SLEEP Subtitles Audio language Channel
list Favourites list Image freeze Radio Lock Parent lock Hotel mode
SLE 65MUS700TCSB
65″ (164 cm) 300 W <0.5 W
AC 220240 V ~ 50/60 Hz Yes
400 x 300
1447243905 mm
144771838 mm
21.5 kg
SLE 55MUS700TCSB
55″ (139 cm) 230 W <0.5 W
AC 220240 V ~ 50/60 Hz Yes
400 × 300
1230783245 mm
123071871 mm
15 kg
SLE 43US700TCSB
43″ (108 cm) 100 W <0.5 W
AC 220240 V ~ 50/60 Hz Yes
200 x 200
955.5 x 606.5 x 207 mm
955.5 x 559.5 x 97.5 mm
6.5 kg
1 3 (1xARC)
1 1 1 1 2 1 1 AVI, MP4, MPG, MKV, MOV, DAT, VOB, MP3, M4A, AAC, WMA, JPEG,
JPG, PNG 1
1 3 (1xARC)
1 1 1 1 2 1 1 AVI, MP4, MPG, MKV, MOV, DAT, VOB, MP3, M4A, AAC, WMA, JPEG,
JPG, PNG 1
1 3 (1xARC)
1 1 1 1 2 1 1 AVI, MP4, MPG, MKV, MOV, DAT, VOB, MP3, M4A, AAC, WMA, JPEG,
JPG, PNG 1
3840 x 2160 178°/178° DVB-T/T2, DVB-C, DVB-S2 PAL/SECAM BG/DK/I
Yes Yes Yes Digital EN, CZE, POL, HUN, SVK, GER, FRE, ITA, SPA, GRC, HRV, SRP,
BUL, SLV, LIT, RUS, ROM Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
3840 x 2160 178°/178° DVB-T/T2, DVB-C, DVB-S2 PAL/SECAM BG/DK/I
Yes Yes Yes Digital EN, CZE, POL, HUN, SVK, GER, FRE, ITA, SPA, GRC, HRV, SRP,
BUL, SLV, LIT, RUS, ROM Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
3840 x 2160 178°/178° DVB-T/T2, DVB-C, DVB-S2 PAL/SECAM BG/DK/I
Yes Yes Yes Digital EN, CZE, POL, HUN, SVK, GER, FRE, ITA, SPA, GRC, HRV, SRP,
BUL, SLV, LIT, RUS, ROM Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
19
EN
INSTRUCTIONS AND INFORMATION ABOUT THE DISPOSAL OF DISCARDED PACKAGE
Return the packaging to a collection centre for disposal.
DISPOSAL OF DISCARDED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol placed on the product, accessories or package notifies that the
product must not be treated as household waste. Please dispose of this product
in a collection centre designed for recycling electric and electronic
equipment. In some EU or European countries, you can return your products to
your local dealer when buying a new equivalent product. Proper disposal of
this product helps save valuable natural resources and prevents possible
adverse impacts on the environment and human health that might be caused by
improper waste disposal. For further information, please contact your local
authorities or the nearest waste disposal collection centre. Wrong disposal of
this type of waste may be subject to a legal penalty.
EU Battery Regulation
This symbol on the battery(ies) or on the packaging indicates that the
battery(ies) provided with this product shall not be treated as household
waste. Instead, please separate battery(ies) from other types of waste and
recycle it(them) through your local recycling system to protect environment
and health. The chemical symbol for lead (Pb) is added under this symbol if
the battery(ies) contains more than 0.004 % lead. For more detailed
information about recycling of this battery(ies), please contact your local
authority or the shop where you purchased the product or battery(ies).
For EU companies
If you need to dispose of an electric or electronic device, ask your dealer
your supplier for necessary information.
Disposal in countries outside the European Union
To dispose of this product, please ask the ministry or your dealer for the
necessary information on correct disposal.
The product meets the respective EU requirements.
FAST CR, a.s. hereby declares that the radio device type SLE 65MUS700TCSB, SLE
55MUS700TCSB, SLE 43US700TCSB conforms to the 2014/53/EU directive. For full
version of the EU declaration of conformity, please refer to www.sencor.com
website. Changes in the text, design and technical specifications may be made
without prior notice and we reserve the right to make such changes.
Manufacturer’s address: FAST CR, a.s., U Sanitasu 1621, ícany CZ-251 01
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress
and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
Dolby Audio Manufactured under license from Dolby Laboratories. Dolby, Dolby
Audio, and the double-D symbol are registered trademarks of Dolby Laboratories
Licensing Corporation.
SENCOR
SLE 43US700TCS
SENCOR
SLE 55MUS700TCS
SENCOR
SLE 65MUS700TCS
2160 px 2160 px 2160 px
45 kWh/1000h
62 kWh/1000h
3840 px 1084c3m
20 Copyright © 2024, Fast CR, a. s.
77 kWh/1000h
127 kWh/1000h
3840 px 1395c5m
96 kWh/1000h
160 kWh/1000h
3840 px 1646c5m
Revision 03/2024
Product Information Sheet
COMMISSION DELEGATED REGULATION (EU) 2019/2013 with regard to energy labelling of electronic displays
Parameter
Parameter or value and
Unit
precision
1. Supplier’s name or trademark.
SENCOR
Supplier’s address.
–
2. Model identifier
SLE 43US700TCS
3. Energy Efficiency Class for Standard Dynamic Range F (SDR)
4. On mode power demand in SDR
45,0 W
5. Energy Efficiency Class for High Dynamic Range
G
(HDR)
6. On mode power demand in HDR, if implemented
62,0 W
7. Off mode, power demand, if applicable
0,0 W
8. Standby mode power demand, if applicable
0,3 W
9. Networked standby mode power demand, if applicable
0,8 W
10. Electronic display category
Television
11. Size ratio
16
:
9
12. Screen resolution
3 840 x 2 160 pixels
13. Screen diagonal
108,0 cm
14. Screen diagonal
43 inches
15. Visible screen area
49,8 dm²
16. Panel technology used
LED LCD
17. Automatic Brightness Control (ABC) available
No
18. Voice recognition sensor available
No
19. Room presence sensor available
No
20. Image refresh frequency rate (default)
60 Hz
21. Minimum guaranteed availability of software and firmware updates (from the date of end of the placement on the market)
8 Years
22. Minimum guaranteed availability of spare parts (from the date of end of the placement on the market)
7 Years
23. Minimum guaranteed product support
8 Years
Minimum duration of the general guarantee offered by the supplier
2 Years
24. Power supply type
Internal
25. External power supply (non standardized and included in the product box)
i-
ii Input voltage
-V
iii Output voltage
-V
26. External standardised power supply (or suitable one if not included in the product box)
iii Required output voltage
Page
-V
iii Required delivered current (minimum)
-A
iv Required current frequency
– Hz
EN 21
EN 22
Product Information Sheet
COMMISSION DELEGATED REGULATION (EU) 2019/2013 with regard to energy labelling of electronic displays
Parameter
Parameter or value and
Unit
precision
1. Supplier’s name or trademark.
SENCOR
Supplier’s address.
–
2. Model identifier
SLE 55MUS700TCS
3. Energy Efficiency Class for Standard Dynamic Range F (SDR)
4. On mode power demand in SDR
77,0 W
5. Energy Efficiency Class for High Dynamic Range
G
(HDR)
6. On mode power demand in HDR, if implemented
127 W
7. Off mode, power demand, if applicable
n.a. W
8. Standby mode power demand, if applicable
0,4 W
9. Networked standby mode power demand, if applicable
0,9 W
10. Electronic display category
Television
11. Size ratio
16
:
9
12. Screen resolution
3 840 x 2 160 pixels
13. Screen diagonal
139,0 cm
14. Screen diagonal
55 inches
15. Visible screen area
82,4 dm²
16. Panel technology used
LED LCD
17. Automatic Brightness Control (ABC) available
No
18. Voice recognition sensor available
No
19. Room presence sensor available
No
20. Image refresh frequency rate (default)
60 Hz
21. Minimum guaranteed availability of software and firmware updates (from the date of end of the placement on the market)
8 Years
22. Minimum guaranteed availability of spare parts (from the date of end of the placement on the market)
7 Years
23. Minimum guaranteed product support
8 Years
Minimum duration of the general guarantee offered by the supplier
2 Years
24. Power supply type
Internal
25. External power supply (non standardized and included in the product box)
i-
ii Input voltage
-V
iii Output voltage
-V
26. External standardised power supply (or suitable one if not included in the product box)
iii Required output voltage
Page
-V
iii Required delivered current (minimum)
-A
iv Required current frequency
– Hz
Product Information Sheet
COMMISSION DELEGATED REGULATION (EU) 2019/2013 with regard to energy labelling of electronic displays
Parameter
Parameter or value and
Unit
precision
1. Supplier’s name or trademark.
SENCOR
Supplier’s address.
–
2. Model identifier
SLE 65MUS700TCS
3. Energy Efficiency Class for Standard Dynamic Range F (SDR)
4. On mode power demand in SDR
96,0 W
5. Energy Efficiency Class for High Dynamic Range
G
(HDR)
6. On mode power demand in HDR, if implemented
160 W
7. Off mode, power demand, if applicable
0,0 W
8. Standby mode power demand, if applicable
0,2 W
9. Networked standby mode power demand, if applicable
0,7 W
10. Electronic display category
Television
11. Size ratio
16
:
9
12. Screen resolution
3 840 x 2 160 pixels
13. Screen diagonal
164,0 cm
14. Screen diagonal
65 inches
15. Visible screen area
114,8 dm²
16. Panel technology used
LED LCD
17. Automatic Brightness Control (ABC) available
No
18. Voice recognition sensor available
No
19. Room presence sensor available
No
20. Image refresh frequency rate (default)
60 Hz
21. Minimum guaranteed availability of software and firmware updates (from the date of end of the placement on the market)
8 Years
22. Minimum guaranteed availability of spare parts (from the date of end of the placement on the market)
7 Years
23. Minimum guaranteed product support
8 Years
Minimum duration of the general guarantee offered by the supplier
2 Years
24. Power supply type
Internal
25. External power supply (non standardized and included in the product box)
i-
ii Input voltage
-V
iii Output voltage
-V
26. External standardised power supply (or suitable one if not included in the product box)
iii Required output voltage
Page
-V
iii Required delivered current (minimum)
-A
iv Required current frequency
– Hz
EN 23
EN
Warranty conditions
Warranty card is not a part of the device packaging.
This product is warranted for the period of 24 months from the date of
purchase to the end-user. Warranty is limited to the following conditions.
Warranty is referred only to the customer goods using for common domestic use.
The claim for service can be applied either at dealer’s shop where the product
was bought, or at below mentioned authorized service shops. The end-user is
obligated to set up a claim immediately when the defects appeared but only
till the end of warranty period. The end user is obligated to cooperate to
certify the claiming defects. Only completed and clean (according to hygienic
standards) product will be accepted. In case of eligible warranty claim the
warranty period will be prolonged by the period from the date of claim
application till the date of taking over the product by end-user, or the date
the end-user is obligated to take it over. To obtain the service under this
warranty, end-user is obligated to certify his claim with duly completed
following documents: receipt, certificate of warranty, certificate of
installation.
This warranty is void especially if apply as follows: Defects which were put
on sale. Wear-out or damage caused by common use. The product was damaged by
unprofessional or wrong installation, used in contrary to the applicable
instruction manual, used in contrary to legal enactment and common process of
use or used for another purpose which has been designed for. The product was
damaged by uncared-for or insufficient maintenance. The product was damaged by
dirt, accident of force majeure (natural disaster, fire, and flood). Defects
on functionality caused by low duality of signal, electromagnetic field
interference etc. The product was mechanically damaged (e.g. broken button,
fall). Damage caused by use of unsuitable media, fillings, expendable supplies
(batteries) or by unsuitable working conditions (e.g. high temperatures, high
humidity, quakes). Repair, modification or other failure action to the product
by unauthorized person. End-user did not prove enough his right to claim (time
and place of purchase). Data on presented documents differs from data on
products. Cases when the claiming product cannot be indentified according to
the presented documents (e.g. the serial number or the warranty seal has been
damaged).
Manufacturer: FAST CR, a.s., U Sanitasu 1621, ícany 251 01, Czech Republic
Visit www.sencor.com for detailed information about authorized service
centers.
The original version of the instructions is in the Czech language, other
language versions are made by the appropriate translation.
24
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>