GEBERIT 968.889.00.0(06) Electric Power Supply Unit Instruction Manual
- June 1, 2024
- GEBERIT
Table of Contents
GEBERIT 968.889.00.0(06) Electric Power Supply Unit
Product Information
Specifications
- Model Number: 968.889.00.0(06)
- Category: Electrical Installation Unit
- Manufacturer: Not specified
Product Usage Instructions
Installation
- Switch off all main circuits before accessing the terminals.
- Install the unit with an all-pole disconnecting device with a contact opening that complies with the conditions of overvoltage category III for full disconnection.
- The unit should only be connected by an electrically skilled person.
Safety Precautions
- Ensure all power sources are disconnected before installation.
- If unsure, seek assistance from a qualified electrician.
- Do not attempt to install the unit if you are not familiar with electrical installations.
WARNING
Electric shock
Incorrect installation can lead to death or serious injuries.
- Switch off all main circuits before accessing the terminals.
- Install the unit with an all-pole disconnecting device with a contact opening that complies with the conditions of overvoltage category III for full disconnection.
- The unit should only be connected by an electrically skilled person.
SETTINGS
ASSEMBLY INSTRUCTIONS
INSTALLATION
Geberit International AG
Schachenstrasse 77, CH-8645 Jona
[email protected]
www.geberit.com
FAQ
Q: Can I install the unit myself?
A: It is recommended to have the unit installed by a qualified electrician to ensure safety and proper installation.
Q: What should I do if I encounter difficulties during installation?
A: If you face any challenges during installation, stop the process immediately and seek professional help to avoid any risks.
Q: Is it necessary to disconnect all main circuits before installation?
A: Yes, it is crucial to switch off all power sources before starting the installation process to prevent electric shock or other hazards.