ZEBRA ZT410 Media Extension Maintenance Kit Installation Guide
- June 1, 2024
- ZEBRA
Table of Contents
ZEBRA ZT410 Media Extension Maintenance Kit Installation Guide
Installation Instructions
This kit includes the parts and documentation necessary to install the media guide extension maintenance kit into the following printers:
- ZT410/ZT420
Read these instructions thoroughly before installing this kit
Parts List
Before proceeding, verify that your kit contains the following items. To reorder specific parts, navigate to Zebra.com/parts, and select your printer mode
| Item | Description | Qty |
|---|---|---|
| Ref | Media guide extension | 5 |
Install the Media Guide Extension
- Pull out the media guide (1) as far as you can.
| 1 | Media guide |
|---|---|
| 2 | Hole in media guide |
| 3 | Dimple |
| 4 | Media guide extension |
- Slide the media guide extension onto the media guide until it snaps into the hole in the media guide.
- Reset the position of the media guide to the edge of the media.
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp.,
registered in many jurisdictions
worldwide. All other trademarks are the property of their respective owners. ©
2024 Zebra Technologies Corp. and/or its affiliates. All rights reserved. |
www.zebra.com | PATENTS:
ip.zebra.com
The installation is complete.
Read User Manual Online (PDF format)
Loading......