DYMG SUILP10 Portable and Mobile Loading Dock Ramps Instruction Manual
- June 1, 2024
- DYMG
Table of Contents
DYMG SUILP10 Portable and Mobile Loading Dock Ramps
The image depicts a blue mobile loading dock ramp with yellow safety markings. A forklift is shown on the ramp, loading or unloading a shipping container from a truck. The ramp is designed for efficiency and safety in container truck loading and unloading operations.
Specifications
| Feature | Description |
|---|---|
| Container Truck Loading Unloading Solution | Yard ramps are designed to |
eliminate double handling and reduce loading/unloading time, improving operational safety and saving time and money.
Product Part Name
An intuitive guide to the parts of the mobile ramp includes:
- Lingual plate
- Steel partition surface
- Guardrail
- Folding tailboard
- Sealing cylinder
- Chain
- Special solid tire
- Load bearing outrigger
How the Mobile Ramp Works
The mobile loading dock ramp is an auxiliary equipment used with a forklift. It is adjustable in height and allows for the forklift to enter the vehicle for batch loading and unloading. It is operated by a single person and requires no external power source. It is ideal for enterprises, warehouses, factories, stations, wharves, and logistics bases.
Instructions
- Put the tailgate down.
- Tighten the hand pump valve clockwise.
- Press the hand lever up and down to adjust to a height higher than the floor of the car.
- If electric mode, press the up and down button to achieve rise and fall.
- Back the truck under the tongue plate and apply the handbrake.
- Unscrew the valve of the hand pump clockwise and put the carrier board on the bottom of the truck.
- Steel chains—the ramp is fixed to the truck for safe operation.
- Put the stopper behind the tire.
- Fully relieve the pressure of the oil cylinder, and the oil cylinder is in a no-pressure state during use.
- Place the manual outrigger in a vertical state, crank it until it touches the ground and fix it, then fix the pivot pin.
CONTAINER TRUCK LOADING UNLOADING SOLUTION : Our yard ramps eliminate double handling and cuts loading/unloading time, speeding up your operation, and saving you time and money while dramatically improving operational safety!
Structure
How the mobile ramp works:
Mobile loading dock ramp of lifting platform: It is a cargo loading and
unloading auxiliary equipment used in conjunction with a forklift, which can
be used according to the vehicle The height of the carriage is adjusted, and
the lifting range is 1.0-1.8m. With the help of this equipment, the forklift
can directly drive into the interior of the car for batch loading and
unloading operations. It only needs one person to operate and no external
power supply is needed to realize safe and fast loading and unloading of
goods, which can not only reduce your labour intensity but also double the
loading and unloading. Improve operating efficiency, speed up material
circulation, and obtain greater economic benefits. Applicable places: large
enterprises, warehouses, factories, stations, Wharf, warehousing and logistics
base, etc.
FAQ
Can the mobile ramp be used with different vehicle heights?
Yes, the ramp is adjustable to accommodate different vehicle heights for
loading and unloading.
Is external power required to operate the ramp?
No, the ramp can be operated by a single person without the need for an
external power supply.
What are some typical applications of the mobile ramp?
The mobile ramp is suited for use in large enterprises, warehouses,
factories, stations, wharves, and logistics bases.
Can the ramp be operated in electric mode?
Yes, if equipped with electric mode, the ramp can be operated using an up
and down button for rise and fall adjustments.