XINHUI XH-X3 3 In 1 Wireless Charger User Manual
- June 9, 2024
- XINHUI
Table of Contents
XH-X3 3 In 1 Wireless Charger User Manual
Product Description
Thank you for purchasing our product! This product is a 3-in-1 Wireless Charger which can support power charging for Qi compatible mobile phone/ iWatch/ TWS Bluetooth Earbuds.One wireless charger to charge 3 devices simultaneously, bring you an effortless charging experience, no more tangled cords trouble.
Product Appearance
Operation
- Please firstly power on the device by our equipped fast adapter and Type-C charging cable.
- When connected the power, LED indicator Green shine out in 3s; No lights when wireless charger on standby mode; Charge mobile phone and earphone, turn off after 5s of green light; For foreign body detection, the green light blinks; There is no light when the watch is charging.
- When charging devices such as Qi-enabled mobile phonernatch,orlANS Bluetooth Earbuds,just place these devices on the corresponding charging area and they will be charged only after 0.1 second. When the devices are full charged or vou want to terminate charging,just take themaway from the charging area.
Indicator Status
| LED Indicator | State |
|---|---|
| Green light turns off after 3s | Power connected |
| No light | Stand by |
| Green light turns off after 5s | Phone/AirPods charging |
| Non-rotating lamp | Fully charged hour |
| (When the wireless charger is working, Indicator priority FOD/ blinks) | FOD |
Product Parameters
Product name: 3 IN 1 WIRELESS CHARGER
Model: XH-X3
Product size: 12478143mm
Input: 9V/2A 12V/1.5A
Phone output: 5W/7.5W/1OW/15W
AirPods output: 55W (max)
iWatch output: 3W (max)
Accessory List
3 IN 1 WIRELESS CHARGER1
1M Type-C Cable1
User Manual*1
Compatibility
Compatible with all Qi-enabled devices
For Apple watch series 8/7/6/SE/5/4/3/2.
For Airpods Pro/3/2(wireless version only)/ and more TWS Bluetooth Earphones
with wireless charging cases.
For iPhone iPhone 14/14 Plus/14 Pro/ 14 Pro Max/13mini/13/13 Pro/ 13 Pro
Max/12mini/12/12 Pro/12 Pro Max
For Other Qi enabled Devices not shown on the list (Support wireless charging)
. Ifyou more question ,please contact the seller.
Notes
Please pay atenton to the fllowing ises, otherwise it may cause abnormal
charging, high charging temperature, itermittent charging, or even not
charging, In order to have a better experience, please check this note before
you using Otherwise it may cause prevent abnormal charging, high charging
temperature, itermittent charging, or even not charging.
FAQ
- Please put the phone/ Watch/ TWS Earbuds at the center of charging area.
- To achieve the fast charging, please use the 20W adapter we equipped on package .
- The charging distance is 2 to 4mm, the thickness of the protective sleeve should not be thicker than 4mm(magnetic metal will affect the charging stability,Please do not place metal in the center of coil end)
- The watch has temperature control when the temperature reaches 45C, which will stop charging automatically. If the temperature is normal, it willcontinue to charge.
- The lower temperature is, the faster charging speed is. The charging speed is faster in winter than in summer.
- Please don’t charge in high temperature and humid environments to avoid damage of circuit.
- Put it at the place that children can’t reach to avoid unnecessary accidents.
- Please place the charger away from flammable and explosive liquids or gases.
- If you have any problems on this wireless charger, please feel free to contact the seller service , we will offer you a best solution within 24 hoursYour safety and experience is our top priority, we got it all covered.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Made in China
Documents / Resources
|
XINHUI XH-X3 3 In 1 Wireless
Charger
[pdf] User Manual
XH-X3, XHX3, 2A8YB-XH-X3, 2A8YBXHX3, XH-X3 3 In 1 Wireless Charger, 3 In 1
Wireless Charger, Wireless Charger, Charger
---|---