MISSOMA Printable Ring Size Instructions

MISSOMA Printable Ring Size

Product Information

Specifications

• Usage: Ring size measurement
• Requirements: Printer, credit card, ring
• Compatibility: Works with rings of similar band width

Product Usage Instructions

Check Your Page Size

1. Print this document with page scaling set to 100% for a full A4 page.
2. Place a credit card over the designated shape to ensure it fits perfectly

Option 01 – Measure Internal Diameter

1. Measure the internal diameter of a ring that fits well.
2. Match the measurement with the corresponding ring size in Option 02.

Option 02 – Determine Ring Size

1. Place your ring’s band on the provided chart.
2. Match the inside edge to the nearest size circle to find your ring size.
3. If between sizes, choose the larger one for comfort.

Ring Sizer Steps

1. Measure lines A and B to verify correct document size.
2. Cut along the serrated lines and slit at the top of the ring sizer.
3. Insert the opposite end through the slit and place on desired finger.
4. Adjust for fit and ensure comfortable sliding on and off.
5. Note the line position to determine your ring size from the table.

FAQ

• How do I know if my printed page is the correct size?
  To ensure correct printing, measure lines A and B on the document. They should match specified dimensions.

• What if I fall between two ring sizes?
  If you’re between sizes, it’s recommended to choose the larger size for better comfort.

PRINTABLE RING SIZE GUIDES

Find your ring size with these these easy-to-use tutorials. All you need for these hacks are a printer, a credit card and a ring of your own. Just a little tip, make sure to use a ring in a similar style with a similar band width to the ring on your wish list.

CHECK YOUR PAGE IS THE CORRECT SIZE

1. STEP 01 Print this document out ensuring the page scaling is set to 100% for a full A4 page.
2. STEP 02 Grab a credit card and place it over the below shape. It should fit exactly into the shape.

METHOD 01 – USE A RING YOU OWN

OPTION 01
Measure the internal diameter (illustrated on right) of a ring you own that mirrors the fit you want for your new piece. Then match it with the right ring size in option 02.

OPTION 02

1. STEP   01
   Place the band of your ring on the chart below.

2. STEP 02
   Match the inside edge to the nearest size circle. The circled letter that best fits your ring is your ring size.

EXTRA T I P
Falling somewhere in between two sizes? We suggest you opt for the larger for maximum comfort.

METHOD 2 – PRINT YOUR OWN RING SIZER

1. STEP 01
   Measure the lines marked A and B. This will confirm you’ve printed the document to be the right size.

2. STEP 02
   Cut around the ring sizer’s serrated lines and the slit at the top.

3. STEP 03
   Now just push the opposite end of your sizer through the slit and then place on the finger you’d like your new ring to be placed on.

4. STEP 04
   Adjust to fit and make sure it can slide on and off comfortably.

5. STEP 05
   Check the line and make a note of your letter, then match up with our table. This is your ring size.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>