EXIT TOYS steel soccer goal 220x170cm User Manual

June 3, 2024
EXIT TOYS

User manual
EXIT TOYS steel soccer goal 220x170cm Copper soccer goal

Warning! CHOKING HAZARD! – Small parts. Not for Children under 3 years old. Adult assembly is required.
This product should, at all times, be used by the child under the direct supervision of an adult.
OUTDOOR USE ONLY. Only for domestic use.

WARNING:
CHOKING HAZARD-Small parts.
Not for children under 3 yrs.

Introduction

Congratulations on choosing the EXIT Coppa soccer goal!
Have fun, be active and play outdoors……
That’s what keeps driving us to develop innovative, quality toys for cool kids.
We do everything possible to develop safe products for children. As our products are classed as toys, we comply with the toughest consumer safety regulations. Before launching our products onto the market, we have independent tests carried out for certification. We also continuously test our production runs and periodically have independent tests performed again as a further check. Only products which live up to the highest EXIT Toys standard are marked with and recognized by the EXIT brand.  “We want to thank you for your custom and your confidence in this product. We’re sure your kids will have as much fun as we did during development. Being open-minded, we really appreciate all comments and ideas which will help us improve our products or develop new ones.
You are invited to send your ideas to us at info@exittoys.com
Please visit www.exittoys.com and discover more cool new products.
The EXIT Toys team

Warnings for safe use:

To simplify the assembly, please read the following instructions before beginning.
It will be helpful to have an additional person assist in the assembly process.
Keep this manual for future reference.

  • Adult supervision is required at all times when the Goal is used by children.
  • To reduce the risk of entanglement, keep small children away from the net area at all times.
  • When properly assembled and used as intended, this goal is designed to provide many hours of playing enjoyment.
  • Never let children climb on the goal as this can result in the goal falling over causing serious injury or death.
  • The metal frame of the soccer goal will conduct electricity. Lights, extension cords, and all such electrical equipment must never be allowed to come in contact with the soccer goal.
  • Inspect the soccer goal before each use. Make sure the strips and all parts are correctly and securely positioned and attached. Tighten any loose hardware. Replace any worn,  defective, or missing parts.
  • Wear comfortable clothing free of hooks, snaps, drawstrings or anything which may snag or catch in the soccer goal mesh. Remove jewelry, necklaces, and earrings.
  • Read all instructions and complete all assembly before using.

WARNING
ALWAYS ANCHOR GOAL
Unsecured Goals can fall over causing serious injury or death

Assembly and Installation Instructions

  • Adequate overhead clearance is essential. Provide clearance for wires, tree limbs, and other possible hazards.
  • Lateral clearance is essential. Place the Soccer Goal away from walls, structures, fences, and other play areas. Maintain a clear space on all sides of the soccer goal. A  minimum of 3m from the frame edge is recommended.
  • The soccer goal is heavy, two able-bodied adults are required to set it up.
  • Never set-up the soccer goal in heavy rain, wind, or storm conditions, especially storms. It is recommended that the soccer goal be taken apart and stored.
  • When moving the assembled soccer goal, have at least two people evenly the frame to lift the soccer goal off the ground.
  • Place the soccer goal on a level surface before use.
  • Secure the soccer goal against unauthorized and unsupervised use.

Care and Maintenance Instructions

Inspect the soccer goal before each use and replace any worn, defective, or missing parts.
The following conditions could present potential hazards:

  1. Missing, improperly positioned, or insecurely attached frame padding, barrier or enclosure
  2. Punctures, frays, tears, or holes are worn in the soccer goal mesh.
  3. A bent or broken frame.
  4. Sharp protrusions on the frame or suspension.
  5. Loosened or missing hardware, system.

Guarantee Conditions & Service

The owner of this product has the following guarantees on the product:

  • 5 years from the date of purchase on the frame (regular use).
  • A 6-month guarantee is given on the other parts (regular use).
  • The guarantee only applies to material/construction errors of the product and/or parts thereof.

The guarantee is not applicable and/or is invalidated in the following cases:

  • The soccer goal has been handled without due care, has been involved in an accident, or has been fitted with non-approved parts.
  • The product has not been assembled as per instructions or has not been correctly maintained.
  • Parts fitted afterward do not match the product’s technical specifications or original parts have not been used or have not been fitted correctly.
  • The soccer goal is used for professional purposes (hiring, schools, etc.).
  • Technical repairs to the product were not carried out professionally.
  •  Replacement of parts was not carried out on time.
    The owner of the product can only claim a guarantee by presenting the original bill for the purchase to EXIT Toys or the dealer from whom the product was bought. If the claim under the guarantee is refused, then all costs incurred must be paid by the owner.
    The guarantee is not transferable to third parties.

Components

EXIT TOYS steel soccer goal 220x170cm -
Components

Assembly steps

  1. Attach Top Cross Beam(2) to the Top Left Bent Tube(1) and Top Right Bent Tube(3) as shown.EXIT TOYS steel soccer goal 220x170cm - Assembly steps
  2. Slip the step 1 assembly into the Net(19) top sleeves as shown
  3. Insert each Front Side Post(4) onto each Front Bottom Corner(5) as shown.
    Make sure the button snaps into place.![EXIT TOYS steel soccer goal 220x170cm
  • button](https://manuals.plus/wp-content/uploads/2022/10/EXIT-TOYS-steel- soccer-goal-220x170cm-button.png)

    1. Slip the step 3 assemblies into the side sleeves on the Net(19) as shown.
      Insert the Front Side Posts(4) into the Top Left Bent Tube(1) and Top Right Bent Tube(3) until the button snaps into place as shown.EXIT TOYS steel
soccer goal 220x170cm - button snap

    2. Slip the Back Bottom Left Corner(6) into the Net #19 sleeve and press the Back Bottom Left Corner(6) onto the Front Bottom Corner (5) until the but ton snaps into place as shown. Repeat the above step to install the Back Bottom Right Corner(7).

    3. Press Bottom Cross Beam A(8) into Bottom Cross Beam B(9) until the push button snaps into place as shown.EXIT TOYS steel soccer goal 220x170cm - Bottom Cross

    4. Slip the step 6 assembly into the Net(19) bottom middle sleeve, and insert the assembly into the Back Bottom Left Corners(6) and the Back Bottom Right Corner(7) until the button snap into place as shown.EXIT TOYS steel soccer goal 220x170cm - place as shown

    5. Insert the Back Top Bent Tube(11) into the Back Side Post(10) as shown.
      Make sure the button snaps into place.![EXIT TOYS steel soccer goal 220x170cm

  • sure button](https://manuals.plus/wp-content/uploads/2022/10/EXIT-TOYS- steel-soccer-goal-220x170cm-sure-button.png)

    1. Insert each Back Side Post(10) onto the Back Bottom Left Corner(6) and the Back Bottom Right Corner(7) until the button snaps into place as shown. Con next to each Back  Top Bent Tube(11) to Top Left Bent Tube(1) and Top Right Bent Tube(3) using Bolt and Washer (14) as shown. Use Allen Wrench(17) to tighten the Bolts.EXIT TOYS steel soccer goal 220x170cm - tighten Bolts
      ‘Warning label’ outside!

    2. EN: Install three Foams(15) as shown.EXIT TOYS steel soccer goal 220x170cm - Foams

    3. Wrap the three Foams (15) with the Small Logos (21+22). Then apply Big Logo (20) on front and back side of Net(19)EXIT TOYS steel soccer goal 220x170cm - Net

    4. Insert Anchor Tube(11) into Front Bottom Corner(4) as shown. Make sure the button snap into placeEXIT TOYS steel soccer goal 220x170cm - Bottom Corner

    5. Firstly select a flat surface of ground or grass, and make sure the assembly unit is away at least 3m from other structures or obstructions. Then drive the two Ground Spikes(13) which match two Anchor Tubes(11) with steel or rubber mallet. and then insert Anchor Tube(11) into Ground Spike(13) as shown.EXIT TOYS steel soccer goal 220x170cm - Ground

    6. If you want to build more skills, please follow the below steps to install the Training Screen. Firstly make out the front surface of the Training Screen with the logo and the back surface with straps at each corner. Then loop one Elastic with the ball(16) through the strap and tube as shown and attach itself.EXIT TOYS steel soccer goal 220x170cm - Training

    7. Repeat the above step to attach the remaining Elastics with the ball(16) as shown.EXIT TOYS steel soccer goal 220x170cm - remaining

The Soccer Goal is now complete!EXIT TOYS steel soccer goal
220x170cm

Contact:
Dutch Toys Group
P.O. Box 369, 7000 AJ Doetinchem
Edisonstraat 83 , 7006 RB Doetinchem
The Netherlands
info@exittoys.com
www.exittoys.com
EXIT is a registered trademark of the Dutch Toys Group

Documents / Resources

| EXIT TOYS steel soccer goal 220x170cm [pdf] User Manual
steel soccer goal 220x170cm -, soccer goal 220x170cm -
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals