FebSmart FS-HA-ProHeader and 2X USB-A Ports PCIE USB Instruction Manual
- June 3, 2024
- FEBSmart
Table of Contents
FS-HA-ProHeader and 2X USB-A Ports PCI-E USB
Instruction Manual
FS-H2-Pm FS-HA-Pro
Site:www.febsmart.com
Email.support@febsmart.com
FSH2Pro PC Express to US8 3.0 Expansion Card.
2-Ports 19Pie US8 3.0 Header.
FSHA-Pro PCI Express to US8 3.0 Expansion Card.
2X 0SB.A& 1X 19Pin US8 3.0 Header.
FSH2Pro Description
FS-H2-Pro is a PCI Express to 2X 19Pin USB 3.0 5Gbps header expansion card. Each 19Pin USB 3.0 header will extend to 2X USB-A for the PC’s front panel and internal USB devices. The 4X USB-A ports will share 5Gbps bandwidth. Built-in FebSmart Self-Powered Technology, specially designed for high power consumption USB 3.0 devices such as industrial cameras, VR systems, VR sensors, and USB HDD/SSD enclosures. It also works with normal USB 2.0 and USB 3.0 devices such as USB headphones, USB flash drives, USB speakers, USB keyboards, USB universal docking stations, USB KVM switches, USB hubs, etc. Based on the RENESAS NEC 5Gbps USB 3.0 host controller, it will be compatible with most Windows and Linux systems. PCI-E X1 design will work on PCI-E X1, X2, X4, X8, and X16 slots. Mounted the full-size bracket on the USB 3.0 card, and the low profile bracket in the package, which will work on standard-size PCs and slim PCs.
System Requirements:
- Plug and Play on Windows 11,10,8.1,8 (32/64bit) and Windows Server 2012,2012R2,2016,2019,2022 (32/64bit). Need to install the driver on Windows XP, Vista,7 (32/64bit), and Windows Server 2003,2003R2,2008,2008R2 (32/64bit). 2. Driver free on most mainstream Linux systems.
Package List:
lx FS-H2-Pro,1X User manual, IX Low profile bracket,
1X Mount-screw
FSHA.Pro is a PCI Express to 2X USB-A and 1X 19Pin header U3B 3.0 5Gbps
expansion card. The 19Pin 0$8 3.0 header will extend to 2X USB-A ports for
PC’s front panel and internal USB devices. The external 2X USB-A ports and the
1X 19Pin header,4X USB-A ports will share 5Gbps total bandwidth Built in
FebSmart Self-Powered Technology, specially designed for high power
consumption US8 3.0 devices such as industrial cameras, systems, VRgens ors,
and USB HDD/SSD enclosures. It also works with normal USB 2.0 and USB 3.0
devices such as USB mice, USB headphones, USB flash drives, USB universal
docking stations, USB hubs etc. PCI-E X1 design will work on PCI-E X1, X2,
X4, X8, and X16 slots.Based on RENESAS NEC 5Gbps US8 3.0 host controller,it
will be compatible with most Windows and Linux systems. Mounted full height
bracket on the USB 3.0 card, and the low profile bracket is in the package,
will work on slim PCs and full-size PCs System Requirements:
1plug and Play on Windows 11,10,8.1,8 (32/64bit) and Windows Server
2012,2012RR2,2016,2019,2022 (32/64bit) Need to install driver on Windows
XP,Vista,7 (32/64bit) and Windows Server 2003,2003R2,2008,2008R2 (32/64bit)
2Driver free on most main stream Linux systems
Package List
1XFSHA.Pro,1X User manual,1X Low profile bracket,
1X Mount-screw
FebSmart Self-Powered Technology:
FebSmart Self-Powered Technology is a new solution to add more power supply on USB expansion cards. The old version of PCI Express USB cards needs to plug a power cable from the desktop computer’s power supply unit. Sometimes even if users put a power cable on a computer power supply unit, it still drops speed due to power limitation. PCI Express slot can provide 75W max almost 12V/6.25A power in total for PCI-E devices.FebSmart adds 1X voltage transformer chip on each USB 3.0 port to transfer 12V to 5V and provide each channel 3A max power supply.ln other words, each USB channel 2X port will get 5V/3A 15W for connected USB 3.0 devices. Most of the high-power-consumption devices just need around 4-8W which means this USB 3.0 expansion card can light up high- power-consumption devices simultaneously in full speed. To protect connected USB devices and users’ data, FebSmart built-in safety electric circuit protector, voltage stable inductance, and voltage stable capacitors on each USB port. Users do not worry about data loss or burning USB devices anymore. Add superspeed, safe and easy install USB card on desktop PCs.
Add US8 Card on Desktop PCs:
Step1, Switch OFF the PC, unplug the computer from the main socket, and unplug the power cord and other connected peripherals Remove the cover from the computer case
Step2, Find the correct CI Express slot from the motherboard, and insert the
US8 3.0 card into an empty PCI-E slot If using slim PCs users need to change
to the low profile bracket which is in the package
Step3, Reattach the computer cover, put back the removed peripherals, power on a desktop computer
Check If US8 Card Was Detected on PCs
- Users can plug in universal US8 devices such as US8 flash drives, keyboards, mice, etc. Check if the computer can find these devices. If the system reads US devices, means no need to install a driver, can use these added-on US8 3.0 ports now.
- Find this added on USB card hardware in Windows system Device Manager” and check if the system read it.
A. Means Cs find hardware correctly. need to install driver
B. Means US8 card hardware was detected correctly and the system loaded the
driver already. users can use lt OW
C. This Means PCs can not find the added-on US8 card and not load the driver
for the US card. Users need to re-plug the US8 card on the motherboard PCI-E
slot or better change to an active PCI-E slot for the USB card
Install Driver on Desktop PCs:
- FS-H2-Pro and FS-HA-Pro have based on Renesas NEC USB 3.0 host controller.These models share the same installation steps on Windows 11,10,8.1,8,7,XP (32/64bit) and Windows Server 2003,2003R2,2008,2008R2,2012, 2012R2,2016,2019,2022 (32/64bit) systems.
- Windows 11,10,8.1,8 (32/64bit) and Windows server 2012, 2012R2,2016,2019,2022 will load the driver automatically. If it can not read on your system and read “Unknown Device” in Windows “Device Manager” with “Error Code 10 “, users better change to another PCI-E slot for this USB card.
- Windows XP, Vista,7(32/64bit) and Windows server 2003,2003R2,2008,2008R2(32/64bit) system will read as “Unknown Device” in “Device Manager”, users need to install the driver, afterward it will work. 4.FS-H2-Pro and FS-HA-Pro support plug-and-play on most mainstream Linux kernel systems.
Step1, Users can download the driver from our site
www.febsmart.com,then release the Zip file, find
the Setup.exe
Step2, Complete driver installation
-
Double night-dick Setup.exe” and waiting for files ready to install
-
Click Next
-
Accept the license, click Next”
-
Click install
-
Waling for driver installation
-
Click Finish” and start using the new USB ports
User FAQ:
How many USB 3.0 devices will be lighted simultaneously?
– Actually, with FebSmart Self-Powered technology, users can light up high- power consumption devices in all added-on USB ports.
Why do USB devices deliver slower speeds than USB 3.0 design speeds?
– The USB 3.0 design speed SGbps/625MB/S is a theoretical speed, normal users’ devices can not reach the test condition,so the real connection speed will be less than 625MB/S.
Why are USB 3.0 HDD/SSD enclosures running at low speed?
– When PCs use NVME/SATA 3.0 SSD disks, the USB 3.0 HDD/SSD enclosure’s test speed will be affected by the inside HDD or SSD.SATA 3.0 SSDs will get over 300MB/S,SATA 3.0 HDDs will get about 100— 200MB/S. When using SATA 2.0 HDDs, the speed will be less than 100MB/S.
Why do USB flash drives get a very low speed?
– Check if the flash drive is designed on USB 2.0 or USB 3.0. The USB 2.0 flash drives will get a USB 2.0 speed. The USB 3.0 flash drives had one read speed and one write speed when it was produced. Even though the manufacturer claims it is a USB 3.0 flash drive, they may only design the read speed on USB 3.0 but the write speed is much slower. The real test speed will be also affected by the user’s PC’s disk type when copying in files. The PC with SSD’s test speed will be faster than the PC with HDDs.
Do these USB ports still support external USB hubs?
– Yes, all the added-on ports support multiple ports USB hubs.
– PCs report error code 10, how to fix this? Error Code 10 means this PCI-E
slot is not active or has no bandwidth.
1. Some PCI-E slot was disabled in BIOS, users can enable PCI-E slot in BIOS.
2. Some PCI-E slots shared bandwidth with another slot, once that slot was
occupied, this PCI-E slot will have no bandwidth. ln this case, change to
another PCI-E slot.3.Some motherboard manufacturers defined PCI-E slot
function, in this case, users better call the motherboard manufacturer to get
more help.
Where can I get tech support?
– Contact us:support@febsmart.com Driver download: www.febsmart.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>