PHILIPS BDP100 Town Performer User Guide

June 1, 2024
Philips

**PHILIPS BDP100 Town Performer User Guide

**

Town Guide Performer

BDP100 LED50/740 DW PCF SI 62P

TOWN GUIDE PREF FLAT CONE, LED module 5000 lm, Distribution wide, Poly carbonate bowl/cover frosted, Post-top for diameter 62 mm

The Town Guide Performer family consists of six recognisable, yet modern shapes:
Flat Cone, Bowl, Classic Cone, Classic T, T and Tzero. Each luminary has the option of a clear (PCC), translucent (PCTR) or frosted (PCF) bowl (except Tzero, which is only available with a clear bowl). With an extensive range of lumen packages, neutral white or warm white LED lights sources, and a range of dedicated optics for lower mounting heights, it’s easy to select the version that best suits the specific  requirements of your project. All this combined with a long life expectancy of 100,000 operating hours. In addition, Town Guide Performer has a variety of control system options that can make this luminary an integral part of smart energy reduction programs. This includes Misstep, Dynamiter, and Line Switch standalone dim control, and Coded Mains group control, right up to seamless remote connectivity with Interact lighting management software. Installation is easy. Thanks to the bayonet whistle connector with integrated gland located in the spigot, there’s no need to open the luminary for installation. The Signify Service tag app offers direct access to all relevant data, ensuring maintenance is easy too. Philips has made every effort to make the Total Cost of Ownership (TCO) of the luminary as attractive as possible. And as Town Guide Performer is a dedicated LED luminary, compatible with a variety of control systems, there are significant energy and maintenance cost savings compared with conventional lighting.

Product data

General Information

Lamp family code LED 50 [LED module 5000 lm]
Light source replaceable Yes
Number of gear units 1 unit
Driver included Yes
Photocell
Light source engine type LED
Service tag Yes
Product family code BDP 100 [TOWN GUIDE PREF FLAT CONE]
Lighting Technology LED
Value ladder Performance
Embedded control
CE mark Yes
Warranty period 5 years
Flammability mark
ENEC mark ENEC mark
Glow-wire test Temperature 650 °C, duration 5 s
EU RoHS compliant Yes
Serviceability class Class A, luminary is equipped with serviceable parts

(when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts

Light Technical

Upward light output ratio 3
Luminous Flux 2,700 lm
Standard tilt angle posttop
Standard tilt angle side entry
Correlated Color Temperature (Nom 4000 K
Luminous Efficacy (rated) (Nom) 79 lm/W
Color rendering index (CRI) 70
Number of light sources 6
Light source color 740 neutral white
Optical cover type Polycarbonate bowl/cover frosted
Luminaire light beam spread 50° x 70°
Optic type outdoor Distribution wide

Operating and Electrical

Input Voltage 220-240 V
Line Frequency 50 to 60 Hz
Inrush current 45 A
Inrush time 0.285 ms
Power Consumption 34 W
Power Factor (Fraction) 0.94
Connection Screw connection block 5-pole
Cable
Number of products on MCB of 16 A type B 10

Temperature

Ambient temperature range

|

-40 to +35 °C

---|---

Controls and Dimming

Dimmable No
Driver/power unit/transformer Power supply unit (On/Off)
Control interface
Constant light output No

Mechanical and Housing

Housing Material Aluminum
Reflector material
Optic material Acrylate
Optical cover material Polycarbonate
Fixation material Steel
Housing Color Silver
Mounting device Post-top for diameter 62 mm
Optical cover shape Conical flat
Optical cover finish Frosted
Overall length 570 mm
Overall width 570 mm
Overall height 209 mm
Overall diameter 570 mm
Effective projected area 0.051 m²
Dimensions (Height x Width x Depth) 209 x 570 x 570 mm
Parts color All parts colored

Approval and Application

Ingress protection code IP66 [Dust penetration-protected, jet-proof]
Mech. impact protection code IK10 [20 J vandal-resistant]
Surge Protection (Common/Differential) Luminaire surge protection level until

6 kV differential mode and 6 kV common mode
Sustainability rating| Lighting for circularity
Protection class IEC| Safety class I

Initial Performance (IEC Compliant)

Luminous flux tolerance +/-7%
Initial chromaticity (0.38, 0.38) SDCM <5
Power consumption tolerance +/-10%
Init. Color Rendering Index Tolerance +/-2

Over Time Performance (IEC Compliant)

Driver failure rate at 5000 h 0.5 %
Control gear failure rate at median useful life 100000 h 10 %

Lumen maintenance at median useful life*
100000 h| 93

Application Conditions

Performance ambient temperature Tq 25 °C
Maximum dim level Not applicable

Product Data

Order product name BDP100 LED50/740 DW PCF SI 62P
Full product name    BDP100 LED50/740 DW PCF SI 62P
Full product code 871829191958200
Order code     910500991153
Material Nr. (12NC) 910500991153
Numerator – Quantity Per Pack 1
EAN/UPC – Product/Case 8718291919582
Numerator – Packs per outer box 1

Town Guide Performer

EAN/UPC – Case 8718291919582

Dimensional drawing

© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The
information presented in this document is not intended as any commercial offer and does not form part of any
quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.

www.lighting.philips.com
2024, March 14 – data subject to change

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals