PHILIPS BGP291 Lumi Street Instruction Manual

: June 1, 2024
: Philips

Table of Contents

PHILIPS BGP291 Lumi Street
Product Usage Instructions
Product data
Dimensional drawing
Frequently Asked Questions (FAQ)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PHILIPS BGP291 Lumi Street

Specifications:

Lamp family code: LumiStreet gen2
Light source: LED35-4S/830 II DM11 CLO
Luminous Flux: 3500 lm
Color Temperature: 830 warm white
Safety class: II
Distribution: Medium 11
Post-top diameter: 48 mm

Product Usage Instructions

Light Technical Details:

Upward Light Output Ratio: Provided in the technical specifications
Luminous Efficacy: Provided in the technical specifications
Color Rendering Index (CRI): Provided in the technical specifications
Correlated Color Temperature: Provided in the technical specifications

Operating and Electrical:

Input Voltage: 220 to 240 V
Power Consumption: Various power consumption details provided in the technical specifications
Connection: 5-pole Push-in connector

Mechanical and Housing:

Housing Material: Aluminum die-cast
Reflector Material: Polycarbonate
Optic Material: Polymethyl methacrylate
Optical Cover Material: Glass

Approval and Application:

Ingress Protection Code: IP66 (Dust penetration-protected, jet-proof)
Mech. Impact Protection Code: IK08 (5 J vandal-protected)
Surge Protection: Provided in the technical specifications

LumiStreet gen2
BGP291 LED35-4S/830 II DM11 CLO S05Z1Z1-LumiStreet gen2 Micro, LED module 3500 lm, 830 warm white,Safety class II, Distribution medium 11, Post-top for diameter 48 mm
Increasing numbers of municipalities are having to upgrade large-scale conventional street lighting installations with energy efficient LED technology. But they are having to do this with smaller and smaller budgets. That’s why the new generation of LumiStreet has been upgraded and designed to provide a solution to this challenge,it is the ideal solution for performing point-to-point replacement of conventional lighting. LumiStreet gen2 achieves this by offering high efficiency, low Total Cost of Ownership, and ease of installation and maintenance. The ease of installation and maintenance is enabled by the Philips Service tag. Moreover, the Philips SR (System Ready) socket makes it future-ready and you can pair this luminaire with lighting control and software applications such as Interact City.

Product data

General Information

Lamp family code LED35 [LED module 3500 lm]
Light source replaceable Yes
Number of gear units 1 unit
Driver included Yes
Remarks * At extreme ambient temperatures the luminaire might automatically dim down to protect components
Light source engine type LED
Service tag Yes
Product family code BGP291 [LumiStreet gen2 Micro]
Lighting Technology LED
Value ladder Specification
CE mark Yes
Warranty period 5 years
Flammability mark For mounting on normally flammable surfaces
ENEC mark ENEC plus mark
EU RoHS compliant Yes
Serviceability class Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts

Light Technical

Upward light output ratio 0
Luminous Flux 2,992 lm
Standard tilt angle posttop 0°
Standard tilt angle side entry 0°
Correlated Color Temperature (Nom) 3000 K
Luminous Efficacy (rated) (Nom) 125 lm/W
Color rendering index (CRI) 80
Light source color 830 warm white
Optical cover type Flat glass
Luminaire light beam spread 160° – 42° x 54°
Optic type outdoor Distribution medium 11

Operating and Electrical

Input Voltage 220 to 240 V
Line Frequency 50 to 60 Hz
Initial CLO power consumption 27 W
Average CLO power consumption 27 W
End CLO power consumption 27.5 W
Inrush current 21 A
Inrush time 0.225 ms
Power Consumption 24.5 W
Power Factor (Fraction) 0.97
Connection 2 Push-in connector 5-pole
Cable Cable 10 m without plug
Number of products on MCB of 16 A type B 30

Temperature

Ambient temperature range -40 to +50 °C

Controls and Dimming

Dimmable No
Driver/power unit/transformer Power supply unit regulating with constant light output
Control interface –
Constant light output Yes

Mechanical and Housing

Housing Material Aluminum die cast
Reflector material Polycarbonate
Optic material Polymethyl methacrylate
Optical cover material Glass
Fixation material Aluminum
Housing Color Gray
Mounting device Post-top for diameter 48 mm
Optical cover shape Flat
Optical cover finish Clear
Overall length 520 mm
Overall width 234 mm
Overall height 195 mm
Effective projected area 0.0235 m²
Dimensions (Height x Width x Depth) 195 x 234 x 520 mm

Approval and Application

Ingress protection code IP66 [Dust penetration-protected, jet-proof]
Mech. impact protection code IK08 [5 J vandal-protected]
Surge Protection (Common/Differential) Luminaire surge protection level until 6 kV differential mode and 8 kV common mode
Sustainability rating Lighting for circularity
Protection class IEC Safety class II

Initial Performance (IEC Compliant)

Luminous flux tolerance +/-7%
Initial chromaticity (0.43, 0.40) SDCM <5
Power consumption tolerance +/-10%
Init. Color Rendering Index Tolerance +/-2

Over Time Performance (IEC Compliant)

Driver failure rate at 5000 h 0.5 %
Control gear failure rate at median useful life 100000 h 10 %
**Lumen maintenance at median useful life*** 100000 h

Application Conditions

Performance ambient temperature Tq 25 °C
Maximum dim level 0% (digital)

Product Data

Order product name BGP291 LED35-4S/830 II DM11 CLO S05Z1Z1-
Full product name BGP291 LED35-4S/830 II DM11 CLO S05Z1Z1-
Full product code 871951410195100
Order code 910925866932
Material Nr. (12NC) 910925866932
Numerator – Quantity Per Pack 1
EAN/UPC – Product/Case 8719514101951
Numerator – Packs per outer box 1
EAN/UPC – Case 8719514101951

Dimensional drawing

© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.

www.lighting.philips.com
2024, March 14 – data subject to change