Lindo LSC02 2K Intelligent Battery Spotlight Camera User Manual
- June 1, 2024
- Lindo
Table of Contents
Lindo LSC02 2K Intelligent Battery Spotlight Camera
Product Information
Specifications
- Model: LD-LSC-
- Product: Intelligent Battery Spotlight Camera 2K
- Manufacturer: Lindo Innovation INC.
- Warranty: 12-month limited warranty
- Camera Resolution: 2K
- Spotlight: 600 Lumens with IR Lamps
- Motion Detection Range: Up to 26ft (8m)
- Indicators: LED for charging and status
- Connectivity: USB C Fast Charging Port
Product Usage Instructions
Mounting the Camera
- Firmly screw the knob of the mounting bracket into the mounting hole.
- Snap the camera to the mounting bracket and adjust the view. Use the live stream feature in the Lindo Life app for alignment.
Charging the Camera
Before first use, fully charge the camera using the provided USB-C charging
cable. The LED indicator will show a blue light while charging and turn off
when fully charged.
Selecting a Location
Choose a location for the camera that provides the desired view, ideally
7-10ft (2-3m) above the ground. Ensure the camera has a clear field-of-view
for motion detection.
System Setup
Download the Lindo Life app and follow the onscreen
- instructions to set up the camera system.
- Pair the camera by long-pressing the power button for 2-3 seconds.
Additional Charging Option
To extend the battery life, consider using the Lindo Solar Panel (sold
separately) for continuous charging.
Frequently Asked Questions (FAQ)
-
Q: What should I do if my camera does not detect motion?
A: Make sure the motion detection zone is properly set up and no obstructions are blocking the camera’s view. Adjust the camera angle if needed. -
Q: Can I install the camera on a ceiling?
A: Yes, you can mount the camera on a ceiling using appropriate mounting hardware. Ensure it is securely attached and has a clear view of the area.
WHAT’S INCLUDED
For Outdoor Camera Installation
PRODUCT OVERVIEW
Intelligent Battery Spotlight Camera 2K
LET’S START
Download the App and Set up the System
Download the Lindo Life APP and follow the onscreen instructions to
complete the setup.
CHARGING THE CAMERA
Please fully charge the camera before first use.
Extend the battery life with Lindo Solar Panel (sold separately).
- This page only shows the option to charge the camera with Lindo solar panel. Lindo solar panel is sold separately and is not included in this package.
HOW THE SYSTEM WORKS
- The camera detects motion at your porch and allows you to warn the thieves.
- If the distance between the location where your camera is installed and the router exceeds 20ft, you should add a repeater between them.
SELECT A LOCATION
Select a location where you can get the desired view. We recommend hanging the
camera 7-10ft (2-3m) above the ground.
MOUNT THE CAMERA
- Turn the knob of the mounting bracket counterclockwise to loosen and disassemble it.
- Drill holes with a 15/64 inch (6mm) drill bit, then insert the anchors into the holes, anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco.
- Firmly screw the knob of the mounting bracket into the mounting hole.
- Hold and snap the camera to the mounting bracket. Rotate the camera to adjust the view and check it using the live stream, which you can access in the Lindo Life app. Hold and snap the camera to the mounting bracket.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Notice: Charging Statement
When charging your device, you must use a charger and charging cable that
meets USB-IF certification and FCC certification.
CUSTOMER SERVICE
Warranty
12-month limited warranty
Email Us
[email protected]
Lindo Innovation INC. All rights reserved. LINDO and LINDO LIFE Logo are trademarks of Lindo Innovation INC, registered in the Untied States, Japan, European Union and other countries.