PHILIPS ST298M Essential Smart Bright Magnetic User Guide
- June 1, 2024
- Philips
Table of Contents
PHILIPS ST298M Essential Smart Bright Magnetic
Specifications:
- Product Name: Essential SmartBright Magnetic ST298M Suspension 5W 930 36D
- Power: 5W
- Color Temperature: 3000K (warm white)
- Luminous Flux: 350 lm
- Dimmable: Yes
- Input Voltage: 48V
- Power Factor: 0.9
- Material: Aluminum extruded housing, Polycarbonate optical cover
- Ingress Protection Code: IP20 (Finger-protected)
- Mech. Impact Protection Code: IK03 (0.3 J)
Product Usage Instructions
Installation:
- Ensure the power source is switched off before installation.
- Suspend the Essential SmartBright Magnetic light fixture in the desired location using appropriate mounting hardware.
- Connect the power supply to the designated input voltage of 48V.
Dimming:
The Essential SmartBright Magnetic light is dimmable. Use compatible
dimming controls to adjust the brightness level according to your preference.
Maintenance:
Regularly clean the optical cover and housing with a soft, dry cloth to
maintain optimal performance.
FAQ:
-
Q: Is the Essential SmartBright Magnetic light suitable for outdoor use?
A: No, the light has an Ingress Protection Code of IP20, indicating it is only suitable for indoor use. -
Q: Can I use a higher voltage power supply with the light?
A: No, the recommended input voltage for the Essential SmartBright Magnetic is 48V. Using a higher voltage may damage the product.
Essential SmartBright Magnetic
ST298M Suspension 5W 930 36D
- Essential SmartBright Magnetic, 5 W, 930 warm white, Finger-protected
- Essential SmartBright Magnetic is a comprehensive product family with magnetic design which supports an easier and flexible way of installation and commissioning. It offers a complete range of options with product diversity and control availability.
Product data
Product data|
---|---
General Information| | | Number of products on
MCB of 16 A type B| –
Light source engine type| LED| | |
CE mark| No| | Temperature|
| | | Ambient temperature range| -20 to +40 °C
Light Technical| | | |
Luminous Flux| 350 lm| | Controls and Dimming|
Correlated Color Temperature (Nom)| 3000 K| | Dimmable|
–
Luminous Efficacy (rated) (Nom)| 70 lm/W| | Control interface|
–
Color rendering index (CRI)| 90| | |
Light source color| 930 warm white| | Mechanical and
Housing|
Optical cover type| Polycarbonate micro lens optic| |
Housing Material| Aluminum extruded
Unified glare rating CEN| 19| | Optical cover material|
Polycarbonate
| | | Housing Color| Black
Operating and Electrical| | | Optical cover finish|
Smoke
Input Voltage| 48 V| | |
Line Frequency| – Hz| | Approval and Application|
Power Consumption| 5 W| | Ingress protection code| IP20
[Finger-protected]
Power Factor (Fraction)| 0.9| | Mech. impact
protection code| IK03 [0.3 J]
Protection class IEC Safety class III
Initial Performance (IEC Compliant)
- Luminous flux tolerance -10% / +10%
- Power consumption tolerance +/-10%
Product Data
- Order product name ST298M Suspension 5W 930 36D
- Full product name ST298M Suspension 5W 930 36D
- Full product code 872016950846099
- Order code 911401524442
- Material Nr. (12NC) 911401524442
- Numerator – Quantity Per Pack 1
- EAN/UPC – Product/Case 8720169508460
- Numerator – Packs per outer box 16
- EAN/UPC – Case 8720169508644
Dimensional drawing
© 2024 Signify Holding All rights reserved. Signify does not give any
representation or warranty as to the accuracy or completeness of the
information included herein and shall not be liable for any action in reliance
thereon. The information presented in this document is not intended as any
commercial offer and does not form part of any quotation or contract, unless
otherwise agreed by Signify. Philips and the Philips Shield Emblem are
registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com
2024, January 2 – data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>