PegPerego R129 Primo Viaggio Lounge Instruction Manual

PegPerego R129 Primo Viaggio Lounge

Product Information

Product Specifications

• Model: Primo Viaggio Lounge
• Compatibility: R129 UNIVERSAL BELTED 40-87 cm, R129 i-SIZE UNIVERSAL ISOFIX 40-87 cm
• Features:
  • 3-point integral harness with shoulder straps
  • Height-adjustable headrest
  • Manual instruction door
  • Shock-absorbing EPS-coated headrest and inserts
  • Kinetic Pods for side impact protection
  • Chest clip for chest protection
  • Base release lever

Product Usage Instructions

Installation with Base

1. To recline in one of the 3 available positions, use the lever.
2. Attach the car seat to the Base i-Size/Base Twist. To detach, pull the release lever while lifting.
3. To complete installation, press the two buttons on the handle, rotate, and position towards the seat. Press and hold the buttons while adjusting the handle to the desired position until you hear a click.

Installation without base

1. Ensure the car seat is parallel to the ground. Use rolled towels or pool noodles in the seat crease if needed. Secure the car seat with the vehicle’s seat belt.
2. Thread the lower part of the vehicle’s seat belt through the designated path on the car seat.

Important Safety Guidelines

• Do not use the product as a recliner or rocker.
• Ensure the car seat is securely installed and your child is properly restrained at all times.
• Avoid prolonged exposure to direct sunlight to prevent color changes in materials.
• Do not rock or place the product on elevated surfaces like tables.

Maintenance Instructions

• Clean with a damp cloth; avoid using solvents or similar products.
• For fabric parts, follow the washing instructions on the label.

Frequently Asked Questions (FAQ)

• Q: How do I know if the car seat is installed correctly?
  A: Ensure a secure fit by following the installation instructions provided. You can also seek professional assistance for verification.

• Q: Can I wash the entire car seat in a washing machine?
  A: No, it is recommended to spot clean or hand wash fabric parts following the manufacturer’s instructions.

Primo Viaggio Lounge
The “Primo Viaggio Lounge” car seat is installed in the vehicle using the three-point seatbelt.

SIZE

R129 i-SIZE UNIVERSAL ISOFIX 40-87 cm

Primo Viaggio Lounge+ Base i-Size

• The “Base i-Size” with Isofix attachment system is installed in the vehicle using the Isofix anchors located between the vehicle seat and backrest.
• See the “Base i-Size” instruction manual for the vehicle installation procedure.

Primo Viaggio Lounge+ Base Twist

• The “Base Twist” with Isofix attachment system is installed in the vehicle using the Isofix anchors located between the vehicle seat and backrest.
• See the “Base Twist” instruction manual for the vehicle installation procedure.

Thank you for choosing a Peg Perego product.

Product characteristics

• Suitable for children between 40 and 87 cm with a maximum weight of 13 kg.

• This is a Universal Belted Enhanced Child Restraint System. It is approved according to UN Regulation No. 129/03 for use primarily in Universal seating positions, as indicated by vehicle manufacturers in the vehicle user’s manual.

• The use of the car seat for premature infants born at less than 37 weeks could cause respiration problems for the newborn. It is advisable to seek medical advice before leaving the hospital.

• This car seat is approved for installation in the car without the base or with the Base i-Size/Base Twist.

• When used with a Base i-Size/Base Twist, this car seat becomes an “i-Size” enhanced child restraint system. It is approved by UN Regulation No. 129/03 for use in i-Size-compatible vehicle seating positions, as indicated by vehicle manufacturers in the vehicle users’ manual.

• The car seat can only be used in approved vehicles, fitted with static or inertia-reel three-point seatbelts, approved under regulation UN/ECE no. 16 or equivalent standards. It must not be used with two-point or lap seatbelts.

• Consult the list of car models and seats equipped with ISOFIX anchor systems (see inside) that have been approved by the restraining system manufacturer. Contact the restraining device manufacturer or retailer if you have doubts or require further information on the fitting of the Base i-Size/Base Twist in specific cars.
  For more information, please contact the Peg Perego Assistance Department at the address customer.service@pegperego.com

• This car seat comes with “Adjustable Side Impact Protection”: improved protection against side impacts with the “simultaneous system” for headrest-harness adjustment.

WARNING

• Read the instructions carefully before use and keep them in the holder provided for future reference. Failure to closely follow the car seat installation instructions will put your child at risk.
• The assembly and installation operations must be conducted by adults.
• Always use a car seat when in the car. Never remove the child from the car seat when the vehicle is in motion.
• Never leave a child alone and unsupervised in a car, not even for a short time. The temperature inside the vehicle can change rapidly and become dangerous for the child inside.
• Install this car seat facing the direction opposite to the direction of travel.
• Install this car seat only on seats facing the direction of travel. If the vehicle has rotating or repositionable seats, position them facing the direction of travel.
• Do not fit this car seat onto passenger seats which have active airbags. Deactivate the airbag before fitting the car seat. Using this car seat on seats with active airbags may cause serious injury or death in the event of an accident.
• Check that the child’s car seat is not blocked by a moving part of the seat or a door.
• Scrupulously follow installation instructions; do not use installation methods other than those recommended because they could cause detachment of the car seat.
• Always use the harness when using this car seat.
• Adjust the height and tension of the shoulder straps ensuring that they are snug to the child’s body without constricting him/her too much. Check that the harness is not twisted and that the child does not release it.
• To avoid the risk of falling, always use the car seat harness even for transport outside the vehicle.
• The car seat is not a substitute for a cot; if the child needs to sleep it is important to lie him/her down.
• Do not use the child car seat if it is broken if there are missing parts, or if it has been subjected to heavy impacts as a result of accidents, as it may have suffered structural damage which is not visible but is extremely hazardous.
• Do not use the car seat without its fabric cover; this must not be replaced with one not approved by the manufacturer since it is an integral part of the car seat and the safety system.
• Do not remove the white polystyrene part under the cover and in the headrest as it is an integral part of the safety devices.
• Do not leave the car seat in the vehicle when exposed to the sun. Some parts might heat up and be harmful to the delicate skin of the child -check before placing the child in the seat.
• Do not modify the product.
• Do not remove the adhesive and stitched labels since this might make the product noncompliant with legal requirements.
• For any repairs, replacement parts, and information about the product, contact the after-sales assistance service. Contact information is provided on the last page of this manual.
• Do not use accessories not approved by the manufacturer or by the competent authorities.
• If using a second-hand product, make sure it is a recent model, comes with instructions, and is fully functional in all parts. An obsolete product may not conform to safety standards, due to the natural aging of materials and updating of regulations. If you have any doubts, contact the manufacturer’s customer service center.
• Make sure there are no items of luggage or other unsecured items in the vehicle interior. They could injure the vehicle’s occupants in the event of an accident.
• This product requires only minimal cleaning and maintenance. These operations must be performed by adults.
• It is advisable to keep all the moving parts clean.
• Clean plastic parts periodically with a damp cloth. Do not use solvents or similar substances.
• Do not clean the polystyrene shock-absorbing device with solvents or other similar products.
• Brush fabric parts to remove dust. If you wash fabric parts, follow the washing instructions on the laundry label.
• Protect the product from atmospheric agents: humidity, rain, or snow. Extended exposure to sunshine can cause color changes in many materials.
• Store the product in a dry environment.

WARNING: FOR USE AS A RECLINED CRADLE.

• Do not use the reclined cradle once your child can sit unaided.
• This reclined cradle is not intended for prolonged periods of sleeping.
• It is dangerous to use this reclined cradle on an elevated surface, e.g. a table.

Components of the Product

Inspect the content of the package and contact Customer Care if any items are missing.

The child car seat includes:

• a) Hood
• b) Handlebar
• c) Dual Stage Cushion
• d) Headrest
• e) Harness tension release button
• f) Harness tension adjustment strap
• g) 3-point safety harness with shoulder straps
• h) Reclining lever
• i) Headrest height adjustment button
• l) Instruction manual compartment
• m) Headrest lined with shock-absorbing expanded polystyrene (EPS)
• n) Shock-absorbing expanded polystyrene (EPS) inserts
• o) Kinetic Pods: side protections.
• p) Lever for release from base
• q) Chest Clip

The car seat is ready for use: no assembly is required.

Installation And Using Instruction

How to install the car seat with the base

• Primo Viaggio Lounge features the Ganciomatic System for connection and release in the car with the Base i-Size/Base Twist.
• Refer to the user manual inside the box to install the Base i-Size and Base Twist car seat bases.

1. To recline the backrest in the 3 positions available, use the handlebar on the upper end of the backrest.

2. Attach the car seat to Base i-Size/Base Twist. Release the car seat by pulling the lever on the lower end of the backrest while lifting the car seat.

3. Press the two buttons on the handlebar, rotate it, and position it in the direction of the vehicle seat. Installation is now complete.

4. The car seat handlebar has four fixed positions. To rotate it, press the two buttons on the handlebar and move this to the required angle. Ensure it clicks into position.

   • Position A: the in-vehicle position;
   • Position B: the position for transport by hand and installation on a base, stroller, or chassis;
   • Position C: this is the resting position;
   • Position D: stops the car seat from rocking.
     How to install the car seat without the base
     When used without a base, you can install Primo Viaggio Lounge with the BACKREST IN THE UPRIGHT POSITION, ONLY.

5. If the backrest is reclined, use the handlebar on the upper end of the backrest to bring it to the upright position.
   IMPORTANT! The car seat must be parallel to the ground. If necessary, you can place rolled-up towels or swimming pool float tubes in the folds of the vehicle’s seats, as shown in the figure. Fit the car seat with the child seated inside, remembering to secure the child with the harness.

6. Slide the lower part of the vehicle seatbelt into the two guides on the car seat (fig_a) and buckle it (fig_b), ensuring the seatbelt is taut, as shown in the figure. Grasp the upper part of the vehicle seatbelt and pass it behind the car seat backrest (fig_c).

7. Insert the belt into the rear guide (fig_a). Tighten the vehicle seat belt. Turn the handlebar against the vehicle seat. For the handlebar functions, refer to fig_6 in this manual.

8. The seat is fitted with Kinetic Pods, to ensure greater safety in the event of a side impact. Once you have positioned the seat in the car, pull out COMPLETELY the Kinetic Pod situated on the side FACING THE CAR DOOR by turning it clockwise (fig_a). To return the Pod to its initial position, rotate it counter-clockwise (fig_b). IMPORTANT: Make sure the Kinetic Pod situated on the side facing the inside of the car is never pulled out. Installation is now complete.
   How to use the car seat on the aircraft
   This unit is certified for aircraft use.

9. Position the car seat on the aircraft seat with the backrest in the most upright position.

   • Thread the lap belt through the slots in the shell and lock the latch plate into the buckle.
   • Pull the strap to tighten the seat belt.
   • Adjust the handle in the forwardmost position as shown.
   • IMPORTANT! Use only on forward-facing seats. If the car seat can not be properly secured ask for flight attendant help.
   • IMPORTANT! Do not use the base to install the car seat on an aircraft seat.
   • How to strap your child

10. To release the harness, press the red button on the crotch strap buckle and open the chest clip by pressing the button (fig_a). To engage the harness, place the two shoulder strap tongues in position and insert them into the buckle of the crotch strap until they click into place (fig. b). Join the 2 parts to engage the chest clip.

11. To slacken the harness, insert a finger through the seat opening (1), keep the metal button pressed, and with the other hand pull on the straps (2).

12. Tighten the straps by pulling the central adjustment strap (1) towards you, making sure that the straps are snug to the child’s body at every point and that the chest clip is positioned on the child’s sternum (2).
    CAUTION: Do not over-tighten the straps, and ensure you leave minimum slack.

13. IMPORTANT! In winter, make sure to never strap your child to the car seat wearing bulky clothing or placing blankets between the child’s body and the harness. This could cause incorrect positioning of the safety harness, with serious consequences in the event of a collision. Use a blanket or an approved Peg Perego accessory to protect your child from the weather.

14. The harness and the headrest can be adjusted simultaneously to 6 different heights to follow the growth of the child. To adjust the height, open the door to access the opening in the back of the seat, and press the button on the back of the height adjuster (arrow 1) while raising or lowering the seat to the desired position, making it click into place (arrow 2). Slacken the straps before adjusting the height of the harness and headrest.

15. The safety harness is at the right height when the slots in the backrest are at shoulder height or just below (green area), as shown in the figure. Make sure the straps are not in the red area.

16. This car seat features the Dual Stage Cushion, a system composed of 2 separate cushions for even the smallest babies.

    • a: headrest reducer
    • b: seat reducer cushion
      Do not use the Dual Stage Cushion with children over 61 cm in height and 9 kg in weight.

17. The special shell shape is designed to rock your child. To rock the child gently, put the handlebar in the carry position, as shown (fig_a). To prevent oscillation and stop rocking, lock the handlebar behind the backrest (fig_b).

18. The hood provides your child with shade and shelter. Unzip and lower the hood to cover a greater area.
    IMPORTANT: The hood must not be used to lift the car seat because it might detach.

19. To remove the hood: unbutton the 5 buttons on the lower edge of the hood

20. Lift it and release it upwards.
    How to remove the car seat cover

21. To remove the “Dual Stage Cushion”: unbutton the two buttons (fig_a) anchoring the headrest reducer to the backrest reducer cushion and pull it off. Unfasten the harness and chest clip and remove the reducer cushion by pulling it off from the crotch strap.

22. Remove the chest clip by pulling off the harness from the clip’s 4 openings.

23. Remove the shoulder pads (fig_a); open the compartment on the back of the car seat and pull the straps out the front (fig_b).

24. Remove the cover from the 2 side pins on the body of the car seat (fig_a), pull out the crotch strap (fig_b), and remove the entire cover.

25. Slide off the headrest cover from the bottom first and then, carefully, over the two sides; BE CAREFUL NOT TO BREAK POLYSTYRENE (EPS) PARTS.
    Remove the soft cover in sequence, as shown in the figure.
    Maintenance of the padding
    Brush the fabric parts to remove dust.

    • When washing, closely follow the instructions stated on the label sewn into the cover.
    • Do not use chlorine bleach.
    • Do not iron.
    • Do not dry clean.
    • Do not remove stains with solvents.
    • Do not tumble dry.
      How to cover the car seat
      Proceed to perform the operations shown in Figures 21 through 25 in reverse order.
      The Original Accessory Peg Perego
      Peg Perego accessories are designed as a useful, practical means of simplifying the lives of parents. Discover all your product’s accessories on www.pegperego.com.
      Serial numbers

26. Inside the back compartment, you can find the approval label and the label with the following information: product name, production date, and serial number.

27. The date of production appears on the harness. This information may be of use to customers in the event of problems with the product.

Product cleaning

• This product requires minimal maintenance. Cleaning and maintenance must only be carried out by adults.
• It is advisable to keep all the moving parts clean.
• Clean the plastic parts periodically with a damp cloth. Do not use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock-absorbing device with solvents or other similar products.
• Protect the product from atmospheric agents: humidity, rain, or snow. Extended exposure to sunshine can cause color changes in many materials.
• Store the product in a dry environment.

Peg Perego S.p.A.
Peg Perego S.p.A. adopts a quality management system certified by TÜV Italia Srl by the ISO 9001 standard. Peg Perego can make changes at any time to the models described in this publication for technical or commercial reasons.

After-Sales Service

Peg Perego’s after-sales service
If any parts of the item get lost or damaged, only use genuine Peg Perego spare parts. For any repairs, replacements, information on the products, and sales of genuine spare parts and accessories, contact the Peg Perego Assistance Service and state the serial number of the product, if present.

• tel. 0039/039/60.88.213
• e-mail customer.service@pegperego.com.
• website www.pegperego.com.

Declaration of conformity

Product name
PRIMO VIAGGIO LOUNGE

Product reference number
IMLO—-

Reference Standards (origin)
R129/03

Declaration of conformity
Peg Perego S.p.A. declares, under its own responsibility, that the item in question has undergone a series of internal tests and has been certified by external independent laboratories, in compliance with current legislation.

Date and place of issue
Arcore, October 2023 Peg Perego S.p.A. via De Gasperi, 50 20862 Arcore (MB), ITALY.

PEG PEREGO S.p.A.

• Via A. De Gasperi, 50 20862 ARCORE (MB) ITALIA
• tel. 0039 039 60881
• Servizio Post Vendita/After Sale:
• tel. 0039 039 6088213
• www.pegperego.com.

All of the intellectual property rights for the contents of this instruction manual belong to PEG PEREGO S.p.A. and are protected by the laws in force.

References

• Homepage
• Homepage

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>