PegPerego Lounge Modular Instruction Manual
- June 8, 2024
- PegPerego
Table of Contents
Tatamia follow me
Instructions for use
Lounge Modular
|
---|---
| 
| 
| 
Thank you for choosing a PegPerego product.
WARNING _ IMPORTANT READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
- Never leave the child unattended.
- Always use the restraint system.
- Falling hazard: Prevent your child from climbing on the product.
- Do not use the product unless all components are correctly fitted and adjusted.
- The product must be assembled and adjusted by an adult. Do not use the product if it is not properly assembled, if it is broken or if pieces are missing.
- Prevent the child from falling or slipping; always use the five-point safety harness. Use the safety harness both when the seat is reclined and when it is in the vertical position.
- Do not place your fingers in the mechanisms and make sure the child’s limbs are safe from harm when adjusting the chair.
- Only replacement parts supplied or recommended by the manufacturer/ distributor shall be used.
- Assembly, preparation, cleaning and maintenance of the product must only be carried out by adults.
- Do not leave the high chair exposed to sunlight for long periods of time. Wait until it has cooled down before sitting the child in the chair.
- To make sure that any harness is correctly fitted.
- Do not use accessories which are not approved by the manufacturer.
- WARNING: Do not let the child play with this product. This product is not a toy.
RECLINER
- Do not use the reclined cradle once your child can sit unaided.
- This reclined cradle is not intended for prolonged periods of sleeping.
- It is dangerous to use the reclined cradle on an elevated surface, e.g. a table.
- When used as a recliner, this product is designed for children from birth up to a weight of 9 kg.
- It should not be used as a substitute for a cot. If the child needs to sleep, he/she should be placed in a suitable cot.
- Danger of strangulation: never leave the child in the recliner if the safety harness is loose or undone.
- WARNING! Always apply the brake when stationary.
SWING
- When used as a swing, the product is designed for children from birth up to 6 months of age and max 9 kg.
- Keep a close eye on other children near the product.
- To use the product as a swing, make sure that the seat is always in the lowest position with backrest completely down.
- Always use the protective front bar. It is not a replacement for the safety harness.
- The product is designed for family domestic use and for indoor use only.
- WARNING! Always apply the brake when stationary.
HIGH CHAIR
- Be aware of the risk of open fire and other sources of strong heat in the vicinity of the product.
- Be aware of the risk of tilting when your child can push its feet against a table or any other structure.
- This product is intended for children able to sit up unaided and up to 3 years or a maximum weight of 15 kg.
- Do not use the product as a high chair until the child can sit up alone. The tray and its accessories are not designed to support the child’s weight.
- The tray is not designed to keep the child in the seat and does not substitute the safety harness.
- Make sure the product is placed on a flat surface.
- Position the product so that the child is far from dangers such as electrical wiring, heat sources and flames.
- Do not use the product near stairs or steps.
- The high chair is designed for use at tables without the tray. It is suitable for children from 12 months of age up to a weight of 15 kg.
- WARNING! Always apply the brake when stationary.
- WARNING! To avoid injury ensure that your child is kept away when unfolding and folding this product.
A single product which follows the growth of your child.
- From 0 to 6 months, a comfortable recliner and swing.
- From the age of 6 months, a high chair for eating, playing and relaxing.
- From the age of 12 months, a high chair without a tray, for sitting at the table with the adults.
The images referring to the textile details may differ from the collection
purchased.
For more information, consult our website:
www.pegperego.com
INSTRUCTIONS FOR USE
-
ASSEMBLING THE WHEELS: Carefully assemble the wheels correctly before opening the high chair.
ASSEMBLING THE REAR WHEELS:
the two rear wheels, with a red collar (fig. a), must be hooked onto the rear base of the product, using the high chair backrest as a reference (fig. b). Insert the wheels and push the red collar as far as it will go against the base (fig. c). -
ASSEMBLING THE FRONT WHEELS:
the two front wheels, without a red collar (fig. d), must be hooked onto the front base of the product, using the footrest as a reference (fig. e). Insert them as far as they will go against the base (fig. f). -
OPENING: Lower the two support base sections one after the other to open the high chair. Slightly tilt the high chair to the side opposite the base section you are lowering (fig_a) and check the green rectangle to ensure it is open properly (fig_b).
WARNING: If the red rectangle is visible, the base has not been opened properly. -
Before using the high chair, raise the seat (fig_a), completely recline the backrest until it clicks into position (b) and make sure the pin is properly locked in place (fig_c).
-
FIVE POINT SAFETY HARNESS: To fasten the harness, insert the two waist strap buckles (with shoulder straps attached) into the leg divider strap until you hear a click (fig. a). To release it, press the sides of the buckle and simultaneously pull the waist strap outwards (fig. b). To tighten the waist strap, pull from both sides in the direction of the arrow (fig. c). To loosen it, do the opposite. The waist strap can be tightened as far as the safety stop (fig. d).
-
The shoulder straps of the harness can be set at two different heights. Partially remove the sack (fig_a), release the shoulder straps from the backrest (fig_b) and pull them out from the sack (fig_c).
-
Insert the ends of the shoulder straps in the other slots in the sack (fig_d) and the backrest (fig_e), then put the sack back into the right position on the backrest.
-
BRAKE: The product is packaged with the brakes on. To move the high chair, press the lever and move it forward until you can see GO (fig. a). This will allow the high chair to be moved around freely; you don’t need to keeping pressing it. To put the brakes on, move the lever back until you can see the word STOP and then release the button (fig. b). Wheels are non-scratching.
RECLINER-SWING -
FOOTREST FOR EARLY MONTHS: The high chair is fitted with a footrest for use when it is in the reclinerswing mode. Raise the footrest by rotating it upwards (fig. a). Fold it away bypressing the two sidebuttons (fig. b) and rotating it downwards (fig. c).
-
RECLINER-SWING: Before placing the high chair in the recliner-swing mode, remove the tray (fig. a) and insert the front bar (fig. b). To remove the protective front bar, press the two buttons at its base and pull it out (fig_c).
-
SWING: To transform the chair into a swing, place the seat in the lowest position (fig. a) and press the red buttons on the inner part of the uprights, pushing them upwards (fig. b). Swing mode (fig. c).
-
To put it back in recliner or high chair mode, make sure that the side uprights of the seat are parallel with those of the frame (fig_a), then press the red buttons and push them downwards (fig_b).
HIGH CHAIR -
FOOTREST: Lower the footrest (fig. a), press the two side buttons (fig. b) and select one of the three available heights.
-
TRAY: To fit the tray, pull the central lever underneath it towards you while at the same time pushing it all the way into the armrests (fig_a). To extend or remove the tray, pull the central lever underneath it towards you (fig_b) and move it outwards (fig_c). To remove the tray, pull the side levers outwards and pull the tray towards you. The high chair has a double tray. The top tray can be easily washed in a dishwasher. To remove it, detach it from the lower tray and lift it up (fig. d).
-
USE WITHOUT THE TRAY: to use the seat at the table, remove the tray.
-
ADJUSTING THE HEIGHT: The seat can be set at 9 different heights. To raise or lower the seat, pull the two levers upwards (fig. a) and move it to the required position. This can also be done with the child in the high chair.
-
RECLINING BACKREST: The seat can be reclined in four positions: for eating, playing, relaxing or sleeping. To adjust it, raise the handle behind the backrest (fig. a) and lock it in the required position (fig. b). This can also be done with the child in the high chair.
-
CLOSING AND REOPENING THE TRAY: Pull the central lever underneath it towards you (fig_a) and extend it as far as the red markers (fig_b), then swing it upwards to lock it in place (fig_c). To reopen the tray, swing it downwards then pull the central lever towards you and put the tray in one of the positions for use.
-
COMPACT CLOSURE: before closing the high chair, it is necessary to fold up the tray. Put the backrest in the vertical position, then pull the two red levers on the sides of the seat outwards (Arrow_a). Rotate it downwards (Arrow_b), lower the seat to the bottom position and fold away the footrest. To raise the support bases, press the red levers on the sides of the uprights (Arrow_c) and at the same time lift the grey levers (Arrow_d). The bases will lift up automatically (Arrow_e). The high chair is freestanding when folded up.
-
REMOVABLE COVERS: To remove the seat covers, remove the upper part of the sack, then pull the harness straps out through the backrest (fig. a) and through the sack (fig. b). Push a screwdriver into the hole in the leg divider and pull out the belt (fig. c).
-
Unbutton the sack at the sides (fig. d) and pull up to remove it (fig. e).
SERIAL NUMBERS -
Information about the production date of tatamia follow me can be found under the base.
_ Product name, date of manufacture and serial number.
This information is required for any complaints.
THE ORIGINAL ACCESSORY PEGPEREGO
PegPerego accessories are designed as a useful, practical means of simplifying
the lives of parents.
Discover all your product’s accessories on
www.pegperego.com
CLEANING AND MAINTENANCE
Cleaning must only be carried out by adults.
PRODUCT MAINTENANCE: protect from the weather: water, rain, or snow; prolonged
and continuous exposure to bright sunlight may give rise to colour changes of
various different materials; store this product in a dry place. The
maintenance have to be regularly.
CLEANING THE CHASSIS: periodically clean all plastic parts with a damp cloth.
Do not use solvent or similar cleaning products; keep all metal parts dry to
prevent rusting; keep moving parts clean (adjustment mechanisms, locking
mechanisms, wheels, …) and free of dust and sand and, if necessary, lubricate
with light machine oil all metallic moving parts. Check all nuts and bolts for
tightness and tighten when required. check all coverings for bolts and sharp
edges and replace when required. check swing
seat and attachments for evidence of deterioration. Replace when required in
accordance with the manufacturer’s instructions.
CLEANING THE SACK:
When washing, closely follow the instructions stated on the label sewn into
the cover. Wash with a damp cloth and neutral detergent. Do not wring. Do not
use chlorine bleach. Do not iron. Do not dry clean. Do not use solvents for
stain removal. Do not spin dry.
PEGPEREGO S.p.A.
PegPerego SpA adopts a quality management system certified by TÜV Italia Srl
in accordance with the ISO 9001 standard. PegPerego can make changes at any
time to the models described in this publication for technical or commercial
reasons.
PEGPEREGO AFTER-SALES SERVICE
If any parts of the item get lost or damaged, only use genuine PegPerego spare
parts. For any repairs, replacements, information on the products and sales of
genuine spare parts and accessories, contact the PegPerego Assistance Service
and state the serial number of the product.
tel. 0039/039/60.88.213
e-mail customer.service@pegperego.com
website www.pegperego.com
All intellectual property rights on the contents of this manual are property
of PegPerego S.p.A. and are protected by the laws in force.
Declaration of conformity
– Product name: TATAMIA FOLLOW ME
– Product reference number: IMTATA*
– Reference Standards (origin): EN 12790:2009
EN 14988:2017 + A1:2020 EN71-3 Regolamento (CE) N.
1907/2006 – All. XVII pt. 16,17,43,51,52 (REACH)
– Declaration of conformity La PegPerego S.p.A. dichiara sotto la propria
responsabilità che l’ articolo in oggetto è stato sottoposto a test di
collaudo interni e omologato secondo le normative vigenti presso laboratori
esterni ed indipendenti.
– Date and place of issue: Arcore, February 2021
PegPerego S.p.A. Via De Gasperi, 50 20862 Arcore (MB), ITALY
PegPerego U.S.A. Inc.
3625 INDEPENDENCE DRIVE FORT WAYNE INDIANA 46808
phone 260 482 8191 fax 260 484 2940
Call us toll free: 1 800 671 1701
PegPerego CANADA Inc.
585 GRANITE COURT PICKERING ONTARIO CANADA L1W3K1
phone 905 839 3371 fax 905 839 9542
Call us toll free: 1 800 661 5050
www.pegperego.com
All of the intellectual property rights for the contents of this instruction
manual belong to PegPerego S.p.A. and are protected by the laws in force.
FI002201I283
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>