TUYA PANEL-24W Smart Light User Guide
- June 1, 2024
- Tuya
Table of Contents
TUYA PANEL-24W Smart Light
Specifications
- Product Name: TUYA SMART LIGHT
- Features: Voice control compatibility with
Alexa, Google Assistant, etc.
Product Usage Instructions
Setting Up the TUYA SMART LIGHT
- Unbox the TUYA SMART LIGHT and plug it into a power source.
- Download the corresponding mobile app from the App Store or Google Play Store.
- Follow the in-app instructions to connect the TUYA SMART LIGHT to your Wi-Fi network.
APP Connect Lamp
- Plug in power and check whether the light is blinking quickly, if no blink, switch the light on, off, on, off, on ( Repeat 5 times ) till confirm the light is blinking.
- Open the APP, wait for the system to search the lights and connect the lights, and click”complete” after the step. (In”Automatic scan” mode, you need to allow the App to use “Wi-Fi and Bluetooth” permission, so keep WiFi and Bluetooth are available. If can’t scan light, please use the”Add Manually” )
Voice Control Setup
- Ensure your Alexa or Google Assistant device is set up and connected to your network.
- In the respective app, enable the TUYA SMART LIGHT skill or action.
- Follow the on-screen prompts to link your TUYA SMART LIGHT to your voice assistant.
Using the TUYA SMART LIGHT
To turn the TUYA SMART LIGHT on or off, use voice commands like “Alexa, turn on TUYA SMART LIGHT” or “Hey Google, turn off TUYA SMART LIGHT”. You can also adjust brightness and color using voice commands if applicable.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note : The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).
Frequently Asked Questions (FAQ)
Q: Can I use TUYA SMART LIGHT with other smart home systems?
A : TUYA SMART LIGHT is designed to work seamlessly with Alexa, Google
Assistant, and similar voice control systems. Compatibility with other smart
home systems may vary.
Q: How do I reset TUYA SMART LIGHT?
A : To reset the TUYA SMART LIGHT, press and hold the reset button on
the device for 10 seconds until the light flashes rapidly. Then follow the
setup instructions to reconnect it.