BOSCH SBH4HVX00G Built In Dishwasher User Guide

BOSCH SBH4HVX00G Built In Dishwasher

Product Specifications

• Water Hardness Settings: Soft, Medium, Hard
• Special Salt Dispenser: Yes
• Rinse Aid Dispenser: Yes
• Programmes: Multiple with varying durations and energy consumption
• Detergent Dispenser: Yes

Product Usage Instructions:

Setting up Home Connect:

1. Install the Home Connect app on your mobile device.
2. Scan the QR code with the Home Connect app.

Overview of Water Hardness Settings:
Refer to the table in the instruction manual for selecting the  appropriate water hardness setting.

Adding Special Salt

1. Unscrew the lid of the special salt dispenser and remove it.
2. Fill the dispenser with special salt just before starting the program.

Adding Rinse Aid

1. Press the catch on the lid of the rinse aid dispenser and lift it.
2. Add rinse aid up to the max mark.

Setting the Water Softening System

1. Press the designated button to open the basic settings.
2. Adjust the water hardness setting using the control buttons.
3. Save the settings by pressing a specific button for 3 seconds.

Programmes
Refer to the programme data provided in the manual for duration, energy consumption, and water usage.

Adding Detergent

1. Add the detergent to the dry detergent dispenser as per the recommended quantity.
2. Close the lid of the detergent dispenser securely.

How to Use Your Appliance

1. Load suitable tableware into the dishwasher after removing large food remnants.
2. Add detergent to the dispenser.
3. Switch on the appliance.
4. Select the appropriate programme.
5. Start the programme.
6. Remove tableware at the end of the programme.
7. To cancel a programme, press a specific button for approximately 4 seconds.

Cleaning Filters

1. After each wash, check the filters for residue.
2. Turn and remove the coarse filter for cleaning.

Frequently Asked Questions (FAQ)

• Q: Can I use regular salt instead of special salt in the dispenser?
  A: No, only use special salt to avoid damage to the appliance.

• Q: How often should I add rinse aid?
  A: Add rinse aid up to the max mark before starting each program.

• Q: What should I do if the program needs to be canceled?
  A: Press a specific button for approximately 4 seconds to cancel the program.

Before using for the first time, read the instruction manual and the safety information it contains.

Setting up Home Connect

Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect app.

1. Install the Home Connect app on your mobile device and follow the instructions.
2. Scan the QR code with the Home Connect app.

Overview of water hardness settings

You can find an overview of the water hardness values that can be selected here.
A table of country-specific units can be found in the instruction manual.

Hardness range mmol/l Setting value

• Soft 0 – 1.1 H00
• Soft 1.2 – 1.4 H01
• Medium 1.5 – 1.8 H02
• Medium 1.9 – 2.1 H03
• Medium 2.2 – 2.9 H04
• Hard 3.0 – 3.7 H05
• Hard 3.8 – 5.4 H06
• Hard 5.5 – 8.9 H07

Setting the water softening system

1. Press ⁠.
2. To open the basic settings, press for 3 seconds.
   • The display shows Hxx.
   • The display shows
3. Press Start repeatedly until the right water hardness has been set.
4. To save the settings, press Setup 3 sec. for 3 seconds.

Programmes

• The programme data has been measured in the laboratory according to European standard EN 60436.
• The consumption figures depend on the programme and additional functions selected.
• The running time will change if the rinse aid system is switched off or rinse aid needs to be added.

Adding special salt
To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the programme starts.

1. Unscrew the lid of the dispenser for special salt and remove.
2. On initial start-up: Fill the dispenser right up with water.
3. Add the special salt to the dispenser. The water in the dispenser is displaced and  forced out. Never add detergent.
4. Place the lid back on the dispenser and turn to close.

Adding rinse aid

1. Press the catch on the lid of the dispenser for rinse aid 1 and  2 lift ⁠.
2. Add rinse aid up to the max mark.
3. Close the lid of the dispenser for rinse aid.
   • The lid clicks into position.

Adding detergent

1. Add the detergent to the dry detergent dispenser.
2. Close the lid of the detergent dispenser.
   • The lid clicks into position.

How to use your appliance

1. Load the tableware.
   Only clean tableware that is suitable for dishwashers. Remove large remnants of food from the tableware. Check that the spray arms can ro- tate freely.

2. Add detergent.

3. Switch on the appliance ⁠.

4. Select the programme.

5. Start the programme Start

6. Remove the tableware at the end of the programme.

7. To cancel the programme, press approx. 4 seconds.
   The programme is cancelled and ends after ap-prox. 1 minute.

Cleaning filters

1. After each wash check the filters for residue.
2. Turn the coarse filter anticlockwise  1 and 2 remove the filter system ⁠.
3. Pull down the micro filter to remove.
4. Press the locking catches together 1 and 2 lift the coarse filter out ⁠.
5. Clean the filter elements under running water.
6. Re-assemble the filter system.
7. Insert the filter system into the appliance and turn the coarse filter clockwise. Make sure that the arrow markings match up.

Cleaning spray arms

1. Unscrew the upper spray arm 1 and 2  pull down to remove ⁠.
2. Pull up the lower spray arm to remove.
3. Check the outlet nozzles on the spray arms for blockages under running water and remove any foreign bodies.
4. Insert the lower spray arm.
   • The spray arm clicks into position.
5. Insert the upper spray arm and screw it firmly in place.

Clean wastewater pump

1. Disconnect the appliance from the power supply.
2. Remove the filter system.
3. Scoop out any water.
4. Prise off the pump cover using a spoon and grip it by the crosspiece.
5. Lift the pump cover inwards at an angle and remove.
6. Remove any remnants of food and foreign bodies in the area of the impeller.
7. Insert the pump cover 1 and  2 press down ⁠.
   • The pump cover clicks into position.
8. Install the filter system.

Troubleshooting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>