Lenovo Q5 Hidden Car Recorder Instruction Manual

Lenovo Q5 hidden car recorder

Note: Please read this document in detail before installing and using the product, and keep it in a safe place.

Product Composition

Package contents

Hidden car recorder (quantiy x 1)

Instruction manual (Quantiy x 1)

Security Information

Note: Read the following important safety information carefully before use

1. Do not disassemble or repair the product yourself. This may damage the recorder, cause electric shock and The product warranty will he void.
2. This car recorder should avoid exposure to open fire or long time in a humid and dusty environment, which will It may cause explosion, leakage and fire.
3. Due to local laws and vehicle safety considerations, please do not manually operate the Car Recorder while driving.
4. Please do not drop or hit this product, otherwise it may cause damage to the internal components.
5. For safety reasons, keep this product and its accessories away from children or animals to avoid accidents. To avoid accidents.
6. Do not put this product in a high temperature state for a long time, such as exposure to the sun, may lead to shell and internal components by damage.
7. It is recommended that the product be used at a temperature of -10°C-70°C.
8. recorder in the use of a period of time will lead to an increase in temperature, which is a normal phenomenon.
9. The company is not responsible for any data, content loss in the operation, when you start using this stream media When you start to use this car recorder, you have agreed to the above statement.

Installation Instructions

1. Tum off the car engine.

2. Insert the TF card into the recorder card slot.
   Note Please use high speed TF card (Class10 and above), capacity not less than 4GB.

3. Fix the recorder on the windshield of the car.

4. Insert the car charger into the car cigarette lighter.

5. Use the charging extension cable to connect the power connector of the recorder and the car charger.
   Note  The charging extension cable can be laid along the edge of the windshield of the car when wiring.

6. Install the rear camera in the rear of the vehicle, pay attention to the direction when installing. Wiring can be laid along the roof of the vehicle. After the installation is completed, plug the rear plug into the recorder AV-IN.

7. Adjust the lens position to ensure that the lens is level with the ground.

8. Start the engine and check whether the machine has been installed correctly.
   Note   When the machine is installed correctly, the system work indicator lights up; the machine starts into the recording state, the video indicator flashes. Please pay attention to check whether the screen on the display is normal, if the display screen is inverted image, please contact us in time.

Product Specifications

Mobile WIFI Playback

1. Select the common cell phone sweep or cell phone application store search 6 frame probe to download and install.

https://www.6zhentan.com/app/d0001/index.html

Search WiFi through the phone to find WiFi name: Lenovo-Q5** the beginning of the 123456789 WIFI connection, the password default: 123456789.
Open the APP, add the recorder, follow the steps to add successfully and enter the recorder preview interface

Common faults Not on: make sure the vehicle is in the ignition on state, manually long press the button to open WiFi can not be connected: ensure that the recorder is in the open or have other cell phones connected (the same time Only one cell phone can be connected)
The recorder can not record: ensure whether the SD card is full or damaged, can format the SD card or replace the SD card Checking APP screen is not smooth or not real-time: try to keep the phone background software less, and the phone close to the recorder.
APP can be closed and restarted (Wifi with channel competition bandwidth, adjacent channels interfere with each other)The picture quality is not clear: check whether the recorder lens and car windshield is dirty.

Other notes

1. Key Function Description
   1.1 video interrace Short press “M” button to lock/unlock the video in recording state, long press to enter the setting. Short press “M” to enter playback in video pause state, long press to enter setting. Short press “1” to take a picture “■” to switch between front and back camera. “Mu Short press to turn on/off the video, long press to turn on/off the camera.
   1.2. Playback List Interface “M” key short press to go back 11.41 /1 41.► “1” “0.” to move up and down. “M”Short press to confirm. Long press to turn off
   1. 3.Playback Interface. “M” short press to return, long press to pause/play the video. “P short press to move lett/right, long press to switch video. “•” Short press OK. Long press to turn off
   1.4. Setting interface “M” key short press to return “1” ” Pr short press to move left and right IN” Short press OK . Long press to turn off

2. Function Introduction Start the car engine, the recorder automatically starts and turns on the video recording function.
   2.1 Resolution Currently there are two kinds of resolution: 2K and 1080P, which means 2560×1440 resolution and 1920×1080 resolution respectively. The default is 2K, You can change the “Video Resolution” in the settings.
   2.2 Loop Recording lt means the video recording time is the length of the video file, the recording time period can be set to 1, 2, 5 minutes. Recording time can be set to 1, 2 or 5 minutes, default is 1 minute, which can be modified by “Recording Time” in the settings.
   Note: When the SD card is full, the recorder will overwrite the earlier recorded images.
   2.3 Time lapse recording Time-lapse recording can be selected as off, 12 hours, 24 hours in three forms, the default is off, when selecting to open the When you choose to tum on the time-lapse recording, if the car is turned off and ACC is disconnected, the recorder screen will display “enter time-lapse recording”. I he recording mode is time lapse recording mode. I he time lapse interval prame rate) of time lapse recording can be selected in the time lapse interval of the setting menu. Requirements for the buck board: anti-surge protection, low power cut-off, minimum 4.8V under load, maximum 5.5V, and maximum 5.5V.The maximum can not exceed 5.5V, no-load maximum can not exceed 5.5V, ripple requirements within 100MV;
   Note: 1. This function needs to open the ACC function, otherwise there is no such function.2. Buck box special, can not match other buck line, please know.

2.4 Parking made Parking monitoring is divided into four modes: off, low, medium and
2.5 Gravity sensor This machine has a built-in collision sensor (G-sensor}, gravity high, the default is off, low medium and high indicates the vibration monitoring sensitivity. sensing ts drvided into tour modes: oft, low, Medium and nigh. The catapult 1s off, low, Open the parking monitoring function, in the off state, if the car has a slight vibration, the medium and high indicates the sensitivity of vibration monitoring. Turn on the gravity tecorder will automatically turn on the video and lack and lock the touch. This video is sensor function, if the machine in shelf the machine is vibrating during the recording locked image will not cover, video 15 seconds after Machine automatically shut down. process (such as collision and so on), it can automatically lock the current video. Interface If the video recording process occurs during the boot operation, the locking video does icon 1 shows yellow.
Note: The collision sensor (G-sensor) supports sensitivity not shut down after the end, and Cut back to normal video mode.
Note: Parking monitoring adjustment: high medium/ow, change the setting according to actual needs in the Change
Support sensitivity adjustment: high / medium / low, according to actual needs in the the settings in the gravity sensor settings according to your actual needs.
2.6 Regarding
Parking monitoring settings Change the setting by yourself. Switch Switch for recording sound.
2.7 Formatting The formatting dialog box pops up, you can choose whether to fast format, the default is fast formatting, you can choose yes The default is Quick Format, and you can select Yes or Na to confirm the formatting.
2.8 Restore Factory Settings The Restore Factory Settings dialog box pops up, you can
Note: The picture is for reference only, the product shall prevail in kind. choose whether to confirm to restore factory settings, confirm will restore all The confirmation will restore all function setting information, screen setting lens display and The words “Lenovo” and “Lenovo” and the logo are trademarks of Lenovo Group display screen position, playback interface display screen position and display mode. companies, while the names of other companies, products or services mentioned may be trademarks of their respective owners. © 2023 All rights reserved.

Warranty and Service

Warranty Statement If the product is within the warranty period from the date of purchase, To claim warranty, please contact the product seller or call Lenovo service hotline and ‘we will repair, replace or retum the product tree of charge, as the case may be, under normal follow our instructions. To apply for warranty, you must provide an accurate, complete and use due to quality defects. We will repair, replace or retum the product to you free of charge, legible A valid sales invoice that is accurate, complete and legibly completed. The above appropriate. Uniess otherwise provided by law The product or part to be replaced may not warranty does not apply to tallure or Gamage Caused Dy.(a) Misuse, abuse, or Improper be new, but will be of good performance and at least functionally equivalent to the original transportation, maintenance or storage, such as, but not limited to, under improper Product or part. Ine product or part used Tor replacement may not be new, but will perform temperature, humidity or other improper environmental conditions (a) misuse, abuse, or well and be at least functionally equivalent to the onginal product or part. [he warranty period Improper Transportive, maintenance, or storage, SUCN as, DULNOT limited to, use UNder begins on the date of initial purchase and is based an the invoice date. The warranty period improper temperature, humidity, or other improper environmental conditions (b) force starts from the date of first purchase and is based on the invoice date. In the absence of a majeure or accident, network or power outages, or other events beyond our reasonable vodka invoice, the warranty period shall commence on the date the product is shipped plus control; (c) unauthorized repair or disassembly by non-authorized Lenovo personnel; and thirty (30) days. Invoice datelf the invoice date is later than the actual delivery date of the (d) any third party product or service; (e) use of the product for purposes other than those product, the warranty period will be calculated from the actual delivery date. The warranty specified or intended; (f) use of the product in a manner that is otherwise contrary to the period shall commence no later than Soy (60) days after the date of shipment of the product. product’s (f) use in any other manner that is contrary to the product’s instructions for use.
The repaired or replaced product will continue to be covered by the warranty for the remainder of the warranty period, but not less than 60 days after the date of delivery. The warranty shall continue for the remainder of the warranty period, but not less than thirty (30) days. normal wear and tear or aging that occurs during the use of the product. Scratches, scuffs and problems caused by the use of paints, solvents or other chemicals are not covered by the warranty. This warranty will be void if the original identification label is altered or destroyed. I he integrity and availability of the product and accompanying materials are not warranted. You should inspect the product at the time of receipt and dispute any discrepancies. The foregoing is our entire warranty with respect to the product and applies only within the jurisdiction of mainland China. This warranty gives you specific legal rights, and you may have other rights under the law, and nothing in this document affects your rights under the law. Nothing in this document affects your consumer rights that cannot be excluded or limited by law.

Product Warranty Information

product name| warranty Coverage| Warranty period (months)| warranty Service Type| Remarks
---|---|---|---|---
kenoo hidden car recorder| Mainframe| 12| Customer send in or >end
out for repair|

Notes and instructions: (1) This table is not a description of product specifications and configurations, product specifications and configurations are based on the product actual prevail 2) You should return the product properly packed and cooperate with the logistics provider to check. It is recommended to use the product Original packaging. If the returned product is not covered by the warranty, we will contact you to deal with it in the way you confirm. Please make sure your contact information is accurate and your communication is smooth. If the product is repaired or replaced due to your fault for more than If the repaired or replaced product is not returned to you within two (2) months, you are deemed to have agreed that we will dispose of it in an appropriate manner.

Warranty Card

When purchasing a product, please fill in the following information completely and clearly, and stamp the sellers seal to protect your legal rights and interests.

user information| Name| | Email|
---|---|---|---|---
mailing Address|
Contact number| | Postal Code|
Product Information| Product Name| | Sales Date|
hoduct model| | Invoice number|
vendor information| Name| | Contact number|
4ddreSS| | Postal Code|
Remarks| Note: (I) this form should be confirmed by the sellers seal; (d) for products subject to the relevant ‘three Packages.. this warranty card is equivalent to the ‘three packages’; (3) maintenance records are based on the authorized service agency maintenance certificate. (3) maintenance records to the authorized service agency maintenance certificate shalt prevail, after applying for ferri Please keep il properly

National unified service hotline: 400-8707-363

Legal Notice

The software and Internet services mentioned are used in accordance with the relevant Nothing in this document constitutes a modification of Lenovo’s product warranty policy.

1. Before installing and using the product, please read this document carefully especially the relevant license and/or service agreement. Use of network features may Certain web-based This product is not designed for use in organ transplantation or other life support system
   Safety tips. Please take care of this document for future reference.

2. The illustrations and functional features of the Products may be supported by third-party web services. Some web-based applications, and failure of the product in such applications may result in personal injury or descriptions in this document are provided for illustration purposes only and are for reference only. Tunctions of the product may be supported by third-party network services, and sucn death.

3. The portions of this document belonging to the licensor (if any) are used under
   The product is subject to the actual product. Some parts, functions and features mentioned in this third-party services include those whose content is not Such third party services, including licensee. Without the prior written authorization of Lenovo Any person may not reproduce, document are for illustrative purposes only and may only be applicable to certain models.

4. Some parts, their content, are not provided, guaranteed and supported by Lenovo and may be copy, delete or use all or any part of this document in any way without the prior written functions and features mentioned in this document are for illustrative purposes only and may only be terminated or changed at any time. Use of third-party services is subject to the third-party authorization of Lenovo.

5. This document may not be reproduced, transcribed, abridged, applicable to certain specific models of products.

6. Uniess otherwise expressly indicated, nothing in this The use of third-party services is subject to the third-party terms of service and privacy or compiled into machine-readable format, or stored in a retrievable system in any form, document 1s intended to

7. Unless otnenmse expressly stated, nothing in this document ts intended to policy, such terms may bitterroot Lenovo’s regulations, please read carefully betore using transmitted on a wired or wireless network, in whole or in part, without the prior written describe the specific specifications and configurations of the product. For product specifications and the relevant features and services.Please read these third party terms and conditions authorization of Lenovo. transmitted in a wired or wireless network, or translated in any configurations, please consult the relevant specification documents for this product or request a copy carefully before using the relevant functions and services. Third party services and their form into any text. of the product.

8. Products, applications and content may be updated from time to time and their actual contents are not under the control of Lenovo
   If you use the software, peripherals or Status may aitter tram this Document.

9. Nominal storage capacity represents specications onty.

10. The options provided with this product on other products or in this product, please read the actual capacity available to the user is lower than the nominal value. The technical performance terms and conditions carefully. If you use software, peripherals or options provided with this indicators mentioned are based on specific environment measurements. Some products (depending product on other products, or use software, peripherals or options on this product that are on the product description) require network support to achieve full functionality. Some products not recommended or permitted by this product specification document, you shall be (depending on the product description) require network support to achieve full functionality and may responsible for their compatibility. You shall be responsible for the compatibility, reliability need to be used with smart devices such as cell phones. and legality of such software, peripherals or options.

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>