PIXELHUE 2990 DisplayPort 4K 1-3 Splitter User Manual
- June 1, 2024
- PIXELHUE
Table of Contents
PIXELHUE 2990 DisplayPort 4K 1-3 Splitter
Intellectual Property
Copyright © 2020 Pixelhue Technology Ltd. All rights reserved. No part of this
document may be copied, reproduced, extracted or transmitted in any form or by
any means without the prior written consent of Pixelhue Technology Ltd.
Safety
- Use the power adapter packed in the product or other power adapters approved by Pixelhue Technology Ltd.
- The device should be located in a place free from humidity, high temperature, dust, corrosion and oxidizing gases to avoid damage.
- All components should be handled with care. Shock, knock, falling or collision should be avoided.
- Disconnect the power cord when the device is not used for a long time.
- Do not remove the device cover by yourself. Do not touch any components inside the device.
Change History
Overview
Positioning
- The DisplayPort 4K 1-3 is a 4K video splitter with outstanding performance, excellent stability and high definition. The resolutions of both its inputs and outputs can be up to 4K×2K@60Hz, and downward compatibility is supported.
- This splitter supports 1 x DP 1.2 input and 3 x DP 1.2 real-time outputs. The input and output resolutions are the same.
- This splitter is easy to use and supports plug-and-play. It applies to any device with DP connectors and supports various video processors and Blu-ray & HD DVD players.
Appearance
Applications
Operations
Button Descriptions
- Enter: Enter the menu and confirm the operation.
- Back: Exit the current operation.
- : Move the cursor up.
- : Move the cursor down.
Home Screen
Operations
You can change the input source resolutions using the DisplayPort 4K 1- 3
video splitter. Select Standard Res or Custom Res to change the input
resolution. When you have completed all the settings, move the cursor to Apply
and press Enter to make the settings take effect; otherwise, the changes will
not take effect.
Standard Resolution
- The supported standard resolutions are 1024×768, 1280×720, 1280×1024, 1366×768, 1440×900, 1536×768, 1600×1200, 1920×1080, 1920×1200, 2048X1 080, 2560X1080, 2560X1600, 3840X1080 and 3840X2160.
- The supported refresh rates are 23.98 Hz, 24 Hz, 25 Hz, 29.97 Hz, 30 Hz, 47.95 Hz, 48 Hz, 50 Hz, 56 Hz, 59.94 Hz, 60 Hz, 72 Hz, 75 Hz and 85 Hz.
Custom Resolution
Press and to set a custom width (increasing by even numbers), custom height and custom refresh rate.
Advanced Settings
Advanced settings include EDID Learning, Factory Reset, HW Ver and SW Ver.
- EDID Learning: Automatically learn the resolution of the output device.
- Factory Reset: Reset the device to its factory settings.
- HW Ver: Check the version of the PCB board.
- SW Ver: Check the version of the software.
Language
The supported languages are English and Chinese. You can change either
language as required.
Specifications
Note:
The data is tested by Pixelhue Technology Ltd lab. The test data may differ
due to the influence of the environment and cable material, and the actual
working environment shall prevail. The specifications of the Ethernet cable
and video cable used by the lab test are as follows.
Video cable: 28AWG core
- The positive and negative terminals of the power supply are as follows.
Dimensions
Packing List
Troubleshooting
Q1: No image output
- Step 1 Check whether the cables are properly connected.
- Step 2 Check whether the connections of the input and output DP cables are loose.
- Step 3 Make sure the resolution of the DP signal source is within the supported resolution range.
- Step 4 Disconnect and then reconnect the power cord of the DisplayPort 4K 1-3 video splitter.
Exhibition
Pixelhue Technology Ltd
- Address: Kruisweg 643-647, 2132 NC, Hoofddorp, the Netherlands
- Website: www.pixelhue.com.
- E-mail: info@pixelhue.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>