TOSHIBA ES339CS Multifunctional Systems and Printers Instruction Manual
- June 1, 2024
- Toshiba
Table of Contents
OPERATING INSTRUCTIONS
REPLACING A TONER CARTRIDGE
Open door B.
WARNING
Potential Damage. To prevent damage from electrostatic discharge, touch
any exposed metal frame of the printer before accessing or touching interior
areas of the printer.
Remove the used toner cartridge.
Unpack the new toner cartridge.
Insert the new toner cartridge until it clicks into place.
Close the door.
REPLACING AN IMAGING KIT
Open door B
WARNING
Potential Damage. To prevent damage from electrostatic discharge, touch
any exposed metal frame of the printer before accessing or touching interior
areas of the printer.
Open door A.
CAUTION
Hot surface. The inside of the printer might be hot. To reduce the risk
of injury from a hot component, allow the surface to cool before touching it.
Remove the right cover.
Remove the waste toner bottle.
Remove the toner cartridges.
Remove the used imaging kit.
- Black imaging kit
- Black and colour imaging kit
Unpack the new imaging kit.
Remove the packing material.
Note: If you are replacing the black imaging kit, then insert the magenta, cyan, and yellow developer units into the new imaging kit.
WARNING
Potential Damage. Do not expose the imaging kit to direct light. Extended
exposure to light may cause print quality problems.
WARNING
Potential Damage. Do not touch the photoconductor drum. Doing so may aect
the quality of future print jobs.
Insert the imaging kit until it is fully seated.
Insert the toner cartridges until they click into place.
Insert the waste toner bottle until it clicks into place.
Attach the right cover until it clicks into place.
Close the door A, and then close door B.
For service contact: 1300 887 600
Documents / Resources
|
TOSHIBA ES339CS Multifunctional Systems and
Printers
[pdf] Instruction Manual
ES339CS Multifunctional Systems and Printers, ES339CS, Multifunctional Systems
and Printers, Systems and Printers, Printers
---|---