Vari Electric Standing Desk Instruction Manual
- June 1, 2024
- vari
Table of Contents
Vari Electric Standing Desk
Specifications:
- Model: Electric Standing Desk
- Manufacturer: Upgraded Decor Shop
- Contact: nan@upgradedecorshop.com | (909)637-7665 |(909)637-7593
- Operating Hours: EST 9:00AM – 17:00PM
Product Information:
The Electric Standing Desk is designed to provide users with a versatile and ergonomic workspace solution. With electric height adjustment capabilities, this desk allows users to easily switch between sitting and standing positions, promoting better posture and reducing the risks associated with prolonged sitting.
Product Usage Instructions
Assembly:
- Unbox all components carefully and lay them out in an organized manner.
- Follow the detailed assembly instructions provided in the manual.
- Use the included tools to securely fasten all parts together.
Height Adjustment:
To adjust the height of the desk:
- Locate the control panel or buttons on the desk.
- Press the up or down button to raise or lower the desk to your desired height.
- Ensure that the desk is stable and level before use.
Maintenance:
To keep your Electric Standing Desk in optimal condition:
- Regularly clean the desk surface with a mild detergent and soft cloth.
- Check for any loose screws or parts and tighten them as needed.
- Avoid placing excessive weight on the desk beyond its specified capacity.
FAQ:
Q: How do I troubleshoot if the desk’s height adjustment is not working?
A: If you encounter issues with the height adjustment, first check that
the desk is plugged into a power source and the power switch is turned on.
Ensure that there are no obstructions blocking the movement of the desk. If
problems persist, contact our technical support team for assistance.
nan@upgradedecorshop.com
(909)637-7665 | (909)637-7593
EST 9:00AM–17:00PM
PARTS
TOOLS
INSTALLATION INSTRUCTION
Please read the installation instructions carefully before installation.
STEP 1
Align the holes of Left Leg (2) and Drive Rod (4),Using Wrench(M-G)to secure both with Screw (M-A).
STEP 2
Insert the drive rod(4) into the hole in the right leg (3). If it is not possible to insert, please rotate the right leg (3) slightly until the inner hexagon matches.
STEP 3
As shown, use Wrench (M-H), install Beam (1) to the Legs (2&3) with Screws (M-8)*6.
STEP 4
Using Wrench(M-H), install Leg Base (6)2 to the Legs (2&3) respectively with Screws (M-C)8.
STEP 5
Use screwdriver , install Side Plate (5)2 on each side of the Legs (2&3) with Screws (M-F)4.
STEP 6
Use screwdriver with Screws (M-D) 4 , and Desk Connection Hook (8) 2 to both sides of the Boards.
STEP 7
Fix Silicone Sheet (13)*10 to the corresponding hole position on the Board.
STEP 8
Use screwdriver, secure the Leg part to the Boards (7a&7b) with Screws (M-E)10. Please align the Silicone Sheet (13)10.
STEP 9
As shown, connect the motor at the Left Leg (2), Hand Controller (9) and Power Supply (10) in turn.
STEP 10
Using screwdriver install Hand Controller (9) to the Board ( 7 ) with Screws (M-D)2. Secure the connecting cable with Cable Clip (12)2 and glue it to the bottom of the Board.
STEP 11
Insert Cable Hole Cover (11 )*2 into the hole in the Board ( 7·).
Using the Controller
-
Raise the Desk
Press the button to raise the desk continuously until it reaches the highest position or the button is released. -
Lower the Desk
Press the button to lower the desk continuously until it reaches the lowest position or the button is released. -
Select Height Setting 1
Press the 1 button, and the desk will move to the height that was previously set for that button. -
Select Height Setting 2
Press the 2 button, and the desk will move to the height that was previously set for that button. -
Select Height Setting 3
Press the 3 button, and the desk will move to the height that was previously set for that button.
Save Current Height Setting
Short-press the S button, and the screen will show ‘S-‘ Press the 1, 2),
or (3 button to save the current height setting to that button. When you press
the 1,2, or 3 button, the desk will move to the height that was previously set
for that button. Any button-press will stop the desk.
Settings
Reset
Press and hold the button until ‘rst’ is displayed. Continue holding until the
desk goes down to its lowest level and comes back up slightly.
Release the button, and reset is complete. If the button is released during
the reset procedure, reset will stop. The desk won’t work until reset is done
correctly.
Child Lock
Press and hold the and buttons together for 5 seconds to turn child lock on.
The screen will show ‘LOC’ and the buttons will be disabled Turn child lock o
the same way.
Settings Menu
Press and hold the S button for 5 seconds to enter the settings menu.
Short-press the S button to navigate through the menu. Short-press the or
button to adjust the settings. Long-press the or button to quickly adjust the
height settings. Press and hold the S button again to save the changes.
‘SUS’ will be displayed if saving is successful (or ‘FAL’ if saving fails). If
there is no button press for 10 seconds, the settings menu will be exited
automatically.
Power-Saving Mode
The screen will turn o if there is no button press for a minute. Any button
press will turn the screen on again.
Protection Mode Error Codes
sea| Standby Overvoltage Protection: Standby voltage too high. Power o
the desk, check the connection between power and the controller, and power on
again. If error code persists, please contact technical support.
---|---
SC1| Power Supply Overvoltage Protection: Input voltage too high. If the
correct AC adapter is being used, power o the desk, check the connection
between power and the controller,and power on again. If error code persists,
please contact technical support.
SC4| Operating Overvoltage Protection: Operating voltage too high. Power
o the desk, check the connection between power and the controller, and power
on again. If error code persists, please contact technical support.
hot| Overheating Protection: When the motor has been working
continuously for too long, it will stop operating to prevent overheating. Wait
for at least 18 minutes (until error code disappears) before making any
further height adjustment.
r-6| Power Supply Overvoltage Protection (during use): Input voltage too
high. Error clears when power supply voltage returns to normal. If error code
persists, please contact technical support.
rst| Reset Warning: Continue to complete reset.
E 10| Short Circuit Protection: Power o, check the cable connections,
and power back on again. If error persists, please contact technical support.
Technical Support
(909)637-7665 | (909)637-7593
Other Info
nan@upgradedecorshop.com
Thank you for choosing this product. We strive to provide you with the best quality products and service in the industry. Should you have any issues, please don’t hesitate to contact us.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>