BOSCH SMV4HVX00E Dishwasher Instruction Manual

BOSCH SMV4HVX00E Dishwasher

Product Specifications

• Model: SMV4HVX00E
• Product Type: Dishwasher
• Language: English [en]

Product Information and Usage Instructions

Installation and Connection:

Before using the appliance, make sure to follow the installation and connection steps provided in the manual. This includes installing and connecting the appliance, drainage connection, drinking water connection, and electrical connection.

Familiarizing Yourself with Your Appliance:

Take time to understand the different components of your dishwasher including the controls, top basket, etagere, bottom basket, folding prongs, and cutlery drawer.

Before Using for the First Time:

Perform the initial configuration as outlined in the manual to ensure proper setup before using the dishwasher.

Water Softening System:

Learn about the water softening system, including setting water hardness, using special salt, and how to regenerate the system when needed.

Rinse Aid System:

Understand how to use rinse aid, set the amount needed, and how to switch the rinse aid system on or off as required.

Detergent:

Choose suitable detergents for your dishwasher, add detergent correctly, and avoid using unsuitable detergents to maintain optimal performance.

Tableware:

Learn how to prevent damage to glass and tableware, arrange tableware properly, and remove tableware after each cycle.

Basic Operation:

Follow the steps for basic operation including switching on the  appliance, setting a program, adjusting additional functions, starting the program, interrupting or terminating a program, and switching off the appliance when not in use.

Basic Settings:

Explore the basic settings available on the dishwasher and learn how to change them according to your preferences.

Home Connect:

If applicable, set up the Home Connect feature as per the instructions provided.

FAQs

• Q: How often should I refill the rinse aid?
  • A: The frequency of refilling rinse aid depends on your usage and water hardness. It is recommended to check and refill it regularly to ensure effective cleaning.
• Q: Can I use regular table salt instead of special salt for the water softening system?
  • A: No, it is essential to use special salt designed for dishwashers to prevent damage and ensure proper functioning of the water softening system.

“`

bMogesyncRtBwehfeorwe-egshlecidcoshoebmtevmneeirnoce.eweycfoooiatumnsnr:d/
Dishwasher
SMV4HVX00E [en] Information for Use

Safety

1Safety
Observe the following safety instructions. 1.1General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe
for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2Intended use Only use this appliance: ¡ For cleaning household tableware. ¡ in private households and in enclosed spaces in a domestic en-
vironment. ¡ Up to an altitude of 4000 m above sea level. 1.3Restriction on user group This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers. Do not let children play with the appliance. Cleaning and user maintenance must not be performed by children unless they are being supervised. Keep children under the age of 8 years away from the appliance and power cable. 1.4Safe installation
WARNING Risk of injury! Improper installation may cause injury. When installing and connecting the appliance, follow the instruc-
tions in the manual and installation instructions.
4

Safetyen
WARNING Risk of electric shock! Incorrect installation is dangerous. Connect and operate the appliance only in accordance with the
specifications on the rating plate. Always use the supplied power cable for the new appliance. Connect the appliance to a power supply with alternating cur-
rent only via a properly installed socket with earthing. The protective conductor system of the domestic electrical in-
stallation must be properly installed. Never equip the appliance with an external switching device,
e.g. a timer or remote control. When the appliance is installed, the mains plug of the power
cord must be freely accessible. If free access is not possible, an isolating switch must be integrated into the permanent electrical installation according to the installation regulations. When installing the appliance, check that the power cable is not trapped or damaged. Cutting through the supply hose or immersing the Aqua-Stop valve in water is dangerous. Never immerse the plastic housing in water. The plastic housing on the supply hose contains an electric valve. Never cut through the supply hose. The supply hose contains electric power cables.
WARNING Risk of fire! It is dangerous to use an extended power cord and non- approved adapters. Do not use extension cables or multiple socket strips. Only use adapters and power cords approved by the manufac-
turer. If the power cord is too short and a longer one is not available,
please contact an electrician to have the domestic installation adapted.
5

enSafety
Contact between the appliance and installation lines may lead to a defect in these lines, e.g. gas pipes and power lines. Gas from a corroded gas pipe can ignite. A damaged power line can cause a short circuit. Check that there is a distance of at least 5 cm between the ap-
pliance and installation lines. WARNING Risk of injury!
Hinges move when opening and closing the appliance door and can cause injury. If built-under or integrable appliances are not in a cavity so that
one side is accessible, the hinge area must be covered at the side. Covers are available from Customer Service or specialist outlets.
WARNING Risk of tipping! Improper installation may cause the appliance to tip up. Only install built-under or integrable appliances under a continu-
ous worktop that is securely connected to adjacent cabinets. 1.5Safe use
WARNING Risk of serious harm to health! Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may cause serious harm to health. Follow the safety instructions and directions for use on the
packagings of detergent and rinse aid products. WARNING Risk of explosion!
Adding solvents to the interior of the appliance may cause explosions. Never add solvents to the interior of the appliance.
6

Safetyen
Highly caustic alkaline or highly acidic cleaning agents in conjunction with aluminium parts in the interior of the appliance may cause explosions. Never use highly caustic alkaline or highly acidic cleaning
agents, in particular commercial or industrial products, in conjunction with aluminium parts (e.g. grease filters of extractor hoods or aluminium pans), e.g. for the Machine Care programme.
WARNING Risk of injury! Leaving the appliance door open may result in injury. Only open the appliance door to load or unload tableware in or-
der to prevent accidents, e.g. through tripping. Do not sit or stand on the appliance door when open. Knives and utensils with sharp points can cause injuries. Arrange knives and utensils with sharp points in the cutlery bas-
ket with the points downwards, on the knife shelf or in the cutlery drawer.
WARNING Risk of scalding! If you open the appliance door while the programme is running, hot water may splash out of the appliance. Open the appliance door carefully if the programme is still run-
ning. WARNING Risk of electric shock!
An ingress of moisture can cause an electric shock. Only use the appliance in enclosed spaces. Never expose the appliance to intense heat or humidity. Do not use steam- or high-pressure cleaners to clean the appli-
ance. If the insulation of the power cord is damaged, this is dangerous. Never let the power cord come into contact with hot appliance
parts or heat sources. Never let the power cord come into contact with sharp points or
edges. Never kink, crush or modify the power cord.
7

enSafety
1.6Damaged appliance WARNING Risk of electric shock!
If the appliance or the power cord is damaged, this is dangerous. Never operate a damaged appliance. Never operate an appliance with a cracked or fractured surface. Never pull on the power cord to unplug the appliance. Always
unplug the appliance at the mains. If the appliance or the power cord is damaged, immediately un-
plug the power cord or switch off the fuse in the fuse box and turn off the water tap. Call customer services. Page 48 Improper repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist staff. Only use genuine spare parts when repairing the appliance. If the power cord or the appliance power cable of this appliance is damaged, it must be replaced with a special power cord or special appliance power cable, which is available from the manufacturer or its Customer Service. 1.7Risk to children
WARNING Risk of suffocation! Children may put packaging material over their heads or wrap themselves up in it and suffocate. Keep packaging material away from children. Do not let children play with packaging material. Children may breathe in or swallow small parts, causing them to suffocate. Keep small parts away from children. Do not let children play with small parts. Children may become trapped in the appliance and suffocate. Use the childproof lock if fitted. Never let children play with or operate the appliance.
8

Safetyen
WARNING Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. With redundant appliances, unplug the power cord. Then cut
through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
WARNING Risk of crushing! With higher-level appliances, children can become crushed between the appliance door and cabinet doors underneath. Keep an eye on children when opening and closing the appli-
ance door. WARNING Risk of chemical burns!
Rinse aid and detergent may cause chemical burns to the mouth, throat and eyes. Keep children away from detergent and rinse aid products. Keep children away from the appliance when open. The water in
the interior of the dishwasher is not drinking water. It may contain residues of detergents and rinse aid.
WARNING Risk of injury! Children may get their fingers caught in the slots of the tablet collecting tray and injure themselves. Keep children away from the appliance when open.
9

Preventing material damage

2Preventing material Preventingmaterialdamage damage
Preventing material damage
2.1Safe installation
ATTENTION! Improper installation of the appliance may cause damage. If the dishwasher is installed above
or below other domestic appliances, follow the information on installation in combination with a dishwasher in the installation instructions for the individual appliances. If there is no information or if the installation instructions do not include the relevant information, contact the manufacturer of these appliances to check that the dishwasher can be installed above or below these appliances. If no information is available from the manufacturer, the dishwasher should not be installed above or below such appliances. To ensure the safe operation of all domestic appliances, continue following the installation instructions for the dishwasher. Do not install the dishwasher under a hob. Do not install the dishwasher near heat sources, e.g. radiators, heat storage tanks, ovens or other appliances that generate heat. Contact between the appliance and water pipes may lead to corrosion of these pipes, possibly causing them to leak. Check that there is a distance of at least 5 cm between the appliance and the water pipe. The pipes supplied for the drinking water and waste water connections are not affected here.
10

Modified or damaged water hoses may result in material damage and damage to the appliance. Never kink, crush, modify or cut
through water hoses. Only use the water hoses supplied
with the appliance or genuine spare hoses. Never re-use water hoses that have been used before. If the water pressure is too high or too low, the appliance may not be able to operate properly. Make sure that the water pressure in the water supply system is min. 50 kPa (0.5 bar) and max. 1000 kPa (10 bar). If the water pressure exceeds the maximum value specified, a pressure-reducing valve must be installed between the drinking water connection and the hose set of the appliance.
2.2Safe use
ATTENTION! Escaping water vapour can damage fitted units. When the programme ends, leave
the appliance to cool down for a while before opening the door. Special salt for dishwashers can damage the tub due to corrosion. To make sure that any special salt that escapes is washed out of the tub, add the special salt to the dispenser for special salt immediately before the programme starts. Detergent may damage the water softening system. Only fill the dispenser of the water softening system with special dishwasher salt. Unsuitable cleaning agents may damage the appliance. Do not use a steam cleaner.

Environmental protection and saving energyen

So as not to scratch the finish on the appliance, do not use sponges with a rough surface or abrasive cleaning agents.
To prevent corrosion, do not use sponge cloths on dishwashers with a stainless steel front or rinse such cloths thoroughly several times before using them for the first time.

4Installation and con- Installationandconnection nection
To ensure proper operation, connect Installationandconnection the appliance to the power and water supply correctly. Observe the specified criteria and the installation instructions.

3Environmental protec- Environmentalprotectionandsavingenergy tion and saving energy

Environmental protection and saving energy

3.1Disposing of packaging
The packaging materials are environmentally compatible and can be recycled. Sort the individual components by
type and dispose of them separately.
3.2Saving energy
If you follow these instructions, your appliance will use less electricity and less water.
Use the Eco 50° programme. a The Eco 50° programme is en-
ergy-efficient and environmentally friendly. “Programmes”, Page 17
If you do not have much tableware to wash, use the additional Half Load function.1 a The programme will adjust to a
lower load and consumption will be reduced. “Additional functions”, Page 19

4.1Scope of supply
After unpacking all parts, check for any damage in transit and completeness of the delivery. If you have any complaints, contact the dealer who sold you the appliance or our Customer Service. Note: The appliance has been tested at the factory to check it is in working order. It is possible that water has left marks on the appliance. These marks will disappear after the first wash cycle. The delivery consists of the following: ¡ Dishwasher ¡ Operating instructions ¡ Installation Instructions ¡ Further information documents ¡ Installation material ¡ Steam protection ¡ Mains cable ¡ Quick reference guide
4.2Installing and connecting the appliance
You can position your built-under or integrable appliance in a fitted kitchen between wooden and plastic walls. If you subsequently install your dishwasher as a free-standing appliance, you must stop it from tipping over, e.g. by screwing it to the wall or

1 Depending on the appliance specifications 11

enInstallation and connection
installing it under a continuous worktop that is securely connected to adjacent cabinets. 1. Follow the safety instructions.
Page 4 2. Follow the instructions for electrical
connection. 3. Check the Scope of supply and
the condition of the appliance. 4. Consult the installation instructions
for the installation dimensions required. 5. Make the appliance level using the height-adjustable feet. Make sure that the appliance is standing on the floor securely. 6. Install the drainage connection. Page 12 7. Install the drinking water connection. Page 12 8. Connect the appliance to the power supply.
4.3Drainage connection
Connect your appliance to drainage connection so dirty water is discharged via the wash cycle. Installing the drainage connection 1. Consult the installation instructions
supplied for the steps required here. 2. Connect the wastewater hose to the outlet connection of the siphon using the enclosed parts. 3. When doing so, check that the wastewater hose is not kinked, crushed or twisted. 4. Also check that there is no cover in the drainage system preventing the wastewater from being discharged.

4.4Drinking water connection
Connect your appliance to a drinking water connection.
Installing the drinking water connection Note ¡ If you are replacing the appliance,
you must use a new water supply hose. 1. Consult the installation instructions supplied for the steps required here. 2. Connect the appliance to the drinking water connection using the enclosed parts. Observe the Technical data. 3. When doing so, check that the drinking water connection is not kinked, crushed or twisted.
4.5Electrical connection
Connecting the appliance to the electricity supply Notes ¡ Follow the Safety instructions
Page 4. ¡ Please note that the water safety
system is only functional if there is a power supply. 1. Insert the non- heating appliance plug of the power cable into the appliance. 2. Insert the mains plug of the appliance’s power cable in a socket nearby. The connection data of the appliance can be found on the rating plate. 3. Check the mains plug is inserted properly.

12

Familiarising yourself with your appliance

5Familiarising yourself with your appliance Familiarisingyourselfwithyourappliance
Familiarising yourself with your appliance
5.1Appliance
You can find an overview of the parts of your appliance here.

8 7

9

6

10

5

4

11

3

2

12

1

1

Rating plate

Rating plate with E number and FD number Page 49. The data you need for Customer Service Page 48.

1 Depending on the appliance specifications

13

enFamiliarising yourself with your appliance

2

Detergent dispenser

Add detergent to the detergent dispenser. “Detergent”, Page 26

3

Bottom basket

Bottom basket Page 21

4

Dispenser for special salt Add special salt to the dispenser for special salt.

“Water softening system”, Page 22

5

Lower spray arm

The lower spray arm washes the tableware in the bottom basket. If the tableware has not been washed properly, clean the spray arms. “Cleaning spray arms”, Page 40

6

Tablet collecting tray

During the wash cycle tablets automatically fall out of the detergent dispenser into the tablet collecting tray where they can fully dissolve.

7

Top basket

Top basket Page 20

8

Cutlery drawer

Cutlery drawer Page 22

9

Cutlery shelf1

Cutlery shelf Page 20

10 Upper spray arm

The upper spray arm washes the tableware in the top basket. If the tableware has not been washed properly, clean the spray arms. “Cleaning spray arms”, Page 40

11 Filter system

Filter system Page 39

12 Dispenser for rinse aid

Add rinse aid to the dispenser for rinse aid. “Rinse aid system”, Page 25

1 Depending on the appliance specifications

14

Familiarising yourself with your applianceen
5.2Controls
You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. With some buttons you can perform different functions.
1 2 3456 7 8

13 12 11 10 9

1

ON/OFF button and reset Switching on the appliance

button

Page 31

Switching off the appliance

Page 32

Terminating the programme

Page 32

2

Programme buttons

Programmes Page 17

3

Special salt refill indicator

Water softening system “Adding special salt”, Page 23

4

Rinse aid refill indicator

Rinse aid system “Adding rinse aid”, Page 25

5

WLAN display

Home Connect Page 35

6

Water supply display

Display for water supply

7

Programme buttons and addi- Programmes

tional functions

“Programmes”, Page 17

Additional functions

“Additional functions”, Page 19

8

Start button

Starting the programme Page 32

1 Depending on the appliance specifications

15

enFamiliarising yourself with your appliance

9

button

If you press

for approx. 3

seconds, you can open the basic set-

tings.

“Changing basic settings”,

Page 35

10 Remote Start

“Remote Start “, Page 36

11 Timer programming

Setting timer programming Page 31

12 Door handle1

Open the appliance door.

13 Display

The display shows information about the remaining running time or the basic settings. You can change the basic settings via the display and the setting buttons. “Changing basic settings”, Page 35

1 Depending on the appliance specifications

Symbols on the display 1 The display shows the following symbols depending on the model. See here for an explanation.

Symbol

Description If the symbol for machine care lights up on the display, run machine care. “Machine Care “, Page 38

If the rinse aid refill indicator lights up on the display, top up with rinse aid. “Adding rinse aid”, Page 25

Symbol

Description If the special salt refill indicator lights up on the display, add special salt to the dispenser for special salt just before the programme starts. “Adding special salt”, Page 23 If the appliance is connected to a wireless WLAN home network, the symbol lights up on the display. “Home Connect “, Page 35 If the water inflow or drainage malfunctions, the symbol lights up or flashes on the display. “Troubleshooting”, Page 41

1 Depending on the appliance specifications 16

Programmes

6Programmes Programmes

You Programmes can find an overview of the programmes that can be selected here. Different programmes, which can be found on the control panel of your appliance, are available depending on the appliance configuration. The running time may vary depending on the programme selected. The running time depends on the water temperature, the quantity of tableware, the level of soiling and the Additional function Page 19 selec-

ted. The running time will change if the rinse aid system is switched off or rinse aid needs to be added. The consumption values can be found in the quick reference guide. The consumption values relate to normal conditions and a water hardness of 16 – 20 °E. Different influencing factors such as water temperature or pipe pressure may result in deviations.

Programme Intensive 70°
Auto 45-65° Eco 50°
Silence 50

Use Tableware: ¡ Pots and pans, non-fragile
tableware and cutlery Level of soiling: ¡ Stubborn, burned or dried-on
food remnants containing starch and protein Tableware: ¡ Mixed tableware and cutlery Level of soiling: ¡ Common household food remnants lightly dried on Tableware: ¡ Mixed tableware and cutlery Level of soiling: ¡ Common household food remnants lightly dried on
Tableware: ¡ Mixed tableware and cutlery Level of soiling: ¡ Common household food rem-
nants lightly dried on

Programme sequence Intensive: ¡ Pre-Rinse ¡ Cleaning 70 °C ¡ Intermediate rinse ¡ Final rinse 69 °C ¡ Dry
Sensor-controlled: ¡ Optimised by
sensors depending on the soiling of the washing water. Most economical programme: ¡ Pre-Rinse ¡ Cleaning 50 °C ¡ Intermediate rinse ¡ Final rinse 61 °C ¡ Drying Reduced noise: ¡ Pre-Rinse ¡ Cleaning 50 °C ¡ Intermediate rinse ¡ Final rinse 63 °C ¡ Dry

17

enProgrammes

Programme Express 65° – 1h
Machine Care Favourite

Use
Tableware: ¡ Mixed tableware and cutlery Level of soiling: ¡ Common household food rem-
nants lightly dried on Use only if appliance is unloaded.

Programme sequence Time-optimised: ¡ Cleaning 65 °C ¡ Intermediate rinse ¡ Final rinse 69 °C ¡ Dry
Machine Care 70 °C

–

–

“Favourite “, Page 18

Note: The relatively long running time in the Eco 50 ° programme is due to longer soaking and drying times. This results in optimal consumption values.
6.1Information for test institutes
Test institutes are provided with information for comparability tests, e.g. according to EN60436. These are the conditions for conducting the tests, however they are not the results or consumption values. Request by e-mail to: dishwasher@test-appliances.com The product number (E-Nr.) and the production number (FD) are required here. They can be found on the rating plate on the appliance door.
6.2Favourite
You can save a combination of a programme and an additional function to the button. Save the programme via the Home Connect app or on the appliance.

The pre-rinse program is saved to this button at the factory. Pre-rinse is suitable for all types of tableware. The tableware undergoes intermediate cleaning via cold rinsing. Tip: You can use the Home Connect app to download additional programmes and save them to the button.1
Saving Favourite on the appliance 1. Open the appliance door. 2. Press . 3. Press the right programme button. 4. Press the button for the relevant
additional function. 5. Press for 3 seconds. a The selected programme and the
additional function will flash. a flashes. a The programme and the additional
function are saved. Tip: To reset the programme to the pre-rinse programme stored at the factory, use the Home Connect app1 or reset your appliance to the factory settings.

1 Depending on the appliance specifications 18

Additional functions

7Additional functions Additionalfunctions

You Additionalfunctions can find an overview of the additional functions that can be selected here. Different additional functions, which can be found on the control panel of your appliance, are available depending on the appliance configuration. You can select certain additional functions depending on the programme.

Symbol

Additional func- Use tion

ExtraDry

¡ For a better drying result the final rinse temperature is increased and the drying phase extended.
¡ Especially suitable for drying plastic parts. ¡ There is a slight increase in energy con-
sumption and the running time is extended.

Half Load

¡ Switch on with small loads. ¡ It is recommended adding less detergent to
the detergent dispenser than for a full machine load. ¡ The running time is shortened. ¡ Water and energy consumption are reduced.

SpeedPerfect+

¡ The run time is shortened by 15% to 75%1 depending on the rinse programme.
¡ The additional function can be activated before the start of the programme and at any time when the programme is running.
¡ Energy and water consumption are increased.

1 Depending on the appliance specifications

Features

Features
You Features can find an overview of the possible features of your appliance and how to use them here. These features depend on the model of your appliance.

19

enFeatures
8.1Top basket
Arrange cups, glasses and small items of tableware in the top basket.

4. Raise or lower the basket evenly to the right level.

You can adjust the height of the top basket to make room for larger items of tableware.
Adjusting top basket with side levers To wash large items of tableware in the baskets, adjust the shelf position of the top basket. 1. Pull out the top basket. 2. To prevent the basket from sud-
denly dropping down, hold the side of the basket by the top edge. 3. Press in the levers on the right and left on the outside of the basket.

Check that the basket is level on both sides. 5. Release the levers. a The basket clicks into position. 6. Slide the basket back in.
8.2Etagere
Use the cutlery shelf and space underneath for small cups and glasses or for large items of cutlery, e.g. cooking spoons or serving cutlery.

If you do not need the cutlery shelf, you can fold it up.

20

8.3Bottom basket
Arrange pans and plates in the bottom basket.

Featuresen
8.4Folding prongs
Use the folding prongs to position tableware securely, e.g. plates.

Large plates up to a diameter of 31 cm can be arranged in the bottom basket as shown.

You can fold the prongs down to position pans, bowls and glasses better.1
Folding down prongs1 If you do not need the prongs, fold them down. 1. Push the lever forwards and fold
down the prongs .

1

2

2. To use the prongs again, fold them back up.
a The prongs audibly click into position.
1 Depending on the appliance specifications 21

enBefore using for the first time

8.5Cutlery drawer
Arrange cutlery in the cutlery drawer.
Arrange cutlery with the points and sharp edges downwards.
9Before using for the Beforeusingforthefirsttime first time

1. Add special salt. Page 23 2. Add rinse aid. Page 25 3. Switch on the appliance.
Page 31 4. Setting the water softening system.
Page 23 5. Set the amount of rinse aid to be
dispensed. Page 25 6. Add detergent Page 26. 7. Start the Programme with the
highest cleaning temperature without tableware. To remove any marks from water or other residues, we recommend you operate the appliance without tableware before using it for the first time.
Tip: You can change these settings and other Basic settings Page 33 at any time.

Before using for the first time
9.1Performing the initial configuration
On initial start-up or after a reset to the factory settings, you will need to make settings. Tip: Connect your appliance to a mobile device. You can conveniently change all settings via the Home Connect app. Requirement: The appliance has been installed and connected. Page 11

10Water softening sys- Watersofteningsystem tem
Hard water leaves limescale on the Watersofteningsystem tableware as well as the washing tank, and parts of the appliance may become blocked. To ensure good dishwashing results, you can treat the water with special salt and the water softening system. To avoid damage to the appliance, water with a hardness above 9 °E must be softened.

10.1Overview of water hardness settings
You can find an overview of the water hardness values that can be selected here. You can find out how hard your water is from your local water company or by using a water hardness tester.

22

Water softening systemen

Water hardness °E 0 – 8 9 – 10 11 – 12 13 – 15 16 – 20 21 – 26 27 – 38 39 – 62

Hardness range
Soft Soft Medium Medium Medium Hard Hard Hard

mmol/l
0 – 1.1 1.2 – 1.4 1.5 – 1.8 1.9 – 2.1 2.2 – 2.9 3.0 – 3.7 3.8 – 5.4 5.5 – 8.9

Setting value
H00 H01 H02 H03 H04 H05 H06 H07

Note: Set the water hardness determined on your appliance. “Setting the water softening system”, Page 23 With a water hardness of 0 – 8 °E you can dispense with special salt for dishwashers and switch off the water softening system. “Switching off the water softening system”, Page 24

10.2Setting the water softening system

Set the water hardness on your appliance. 1. Determine the water hardness and
the appropriate setting value. “Overview of water hardness settings”, Page 22

2. Press . 3. To open the basic settings, press
for 3 seconds.

a The display shows Hxx. a The display shows .

4. Press

repeatedly until the

right water hardness has been set.

The value H04 is set at the factory.

5. To save the settings, press for 3 seconds.

10.3Special salt
You can use special salt to soften water. Adding special salt If the special salt refill indicator lights up, add special salt to the dispenser for special salt just before the programme starts. The consumption of special salt depends on the water hardness. The higher the water hardness, the greater the consumption of special salt.
ATTENTION! Detergent may damage the water softening system. Only fill the dispenser of the water
softening system with special dishwasher salt. Special salt for dishwashers can damage the tub due to corrosion. To make sure that any special salt that escapes is washed out of the tub, add the special salt to the dispenser for special salt immediately before the programme starts.
1. Unscrew the lid of the dispenser for special salt and remove.
2. On initial start-up: Fill the dispenser right up with water.

23

enWater softening system 3. Note: Only use special salt for
dishwashers. Do not use salt tablets. Do not use table salt. Add the special salt to the dispenser.
Fill the dispenser right up with special salt. The water in the dispenser is displaced and forced out. 4. Place the lid back on the dispenser and turn to close.
10.4Switching off the water softening system
If you find the special salt refill indicator irritating, e.g. when using combined detergents with salt replacement substances, you can switch the indicator off. Note To avoid damage to the appliance, only switch off the water softening system in the following cases: ¡ The water hardness is max. 26 °E
and you are using a combined detergent with salt replacement substances. According to the manufacturers, combined detergents with salt replacement substances can generally only be used up to a water hardness of 26 °E without adding special salt.

¡ The water hardness is 0 – 8 °E. You do not need to use special salt.

1. Press . 2. To open the basic settings, press
for 3 seconds.

a The display shows Hxx.

a The display shows .

3. Press

repeatedly until the dis-

play shows H00.

4. To save the settings, press for 3 seconds.

a The water softening system is switched off and the salt refill indicator is deactivated.

10.5Regeneration of the water softening system
In order to obtain fault-free function of the water softening system, the appliance performs regeneration of the water softening system at regular intervals. Regeneration of the water softening system takes place before the end of the main rinse cycle in all programmes. It will increase the run time and consumption values, e.g. water and electricity.
Overview of consumption values with regeneration the water softening system Here you can find an overview of the maximum additional running time and consumption values during regeneration of the water softening system.
Regeneration of the water 6 softening system after x washing programmes Additional running time in 7 minutes Additional water consump- 5 tion in litres

24

Additional power consump- 0.05 tion in kWh The consumption values specified are laboratory measurements determined in accordance with the currently applicable standard using the Eco 50° programme and with the factory value of the water hardness set to 16 – 20 °E.

Rinse aid systemen 2. Add rinse aid up to the max mark.
max

11Rinse aid system Rinseaidsystem

Rinse aid system

11.1Rinse aid
For optimum drying results, use rinse aid. Only use rinse aid for domestic dishwashers. Adding rinse aid If the rinse aid refill indicator lights up, top up with rinse aid. Only use rinse aid for domestic dishwashers. 1. Press the catch on the lid of the
dispenser for rinse aid and lift .
2
1

3. If rinse aid spills out, remove it from the tub. Spilled rinse aid can cause excessive frothing during the wash cycle.
4. Close the lid of the dispenser for rinse aid.
a The lid clicks into position.

11.2Setting the amount of rinse aid

If there are streaks or water marks on tableware, change the amount of rinse aid. 1. Press . 2. To open the basic settings, press
for 3 seconds.

a The display shows Hxx. a The display shows .

3. Press

repeatedly until

the display shows the value r05

set at the factory.

4. Press

repeatedly until the

right amount of rinse aid has been

set.

­ A low setting adds less rinse aid during the wash cycle and reduces streaking on tableware.
­ A higher setting adds more rinse aid during the wash cycle, reduces water marks and improves the drying result.

25

enDetergent

5. To save the settings, press for 3 seconds.

11.3Switching the rinse aid system off

If you find the rinse aid refill indicator irritating, e.g. when using combined detergents with a rinse aid component, you can switch the rinse aid system off.

Tip: The function of rinse aid is limited with combined detergents. You will generally get better results using rinse aid.

1. Press . 2. To open the basic settings, press
for 3 seconds.

a The display shows Hxx.

a The display shows .

3. Press

repeatedly until

the display shows the value r05

set at the factory.

4. Press

repeatedly until the dis-

play shows r00.

5. To save the settings, press for 3 seconds.

a The rinse aid system is switched off and the rinse aid refill indicator is deactivated.

12Detergent Detergent

Detergent

12.1Suitable detergents
Only use detergents that are suitable for dishwashers. Both separate and combined detergents are suitable. For optimum washing and drying results, use separate detergent, adding Special salt Page 23 and Rinse aid Page 25 separately. Modern, powerful detergents mainly use a low-alkaline formulation with enzymes. Enzymes break down 26

starch and remove protein. Oxygenbased bleaching agents are generally used to remove coloured marks, e.g. tea or ketchup. Note: Follow the manufacturer’s instructions for each detergent. Tip: Suitable detergents are available online via our website or from Customer Service Page 48.
Tabs Tabs are suitable for all cleaning functions and do not need to be measured out. With shorter programmes tabs sometimes do not dissolve entirely and leave residues of detergent. This may impair the cleaning effect.
Powder detergent Powder detergent is recommended for shorter programmes. The dosage can be adjusted to the level of soiling.
Liquid detergent Liquid detergent works faster and is recommended for shorter programmes without PreRinse. Sometimes liquid detergent may leak out despite the detergent dispenser being closed. This is not a fault and is non-critical if you remember the following: ¡ Only choose a programme without
PreRinse. ¡ Do not select timer programming
for starting the programme. The dosage can be adjusted to the level of soiling.
Separate detergents Separate detergents are products that do not contain components other than detergent, e.g. powder detergent or liquid detergent.

With powder and liquid detergent the dosage can be individually adjusted to the level of soiling of the tableware. For better washing and drying results and to avoid damage to the appliance, please additionally use Special salt Page 23 and Rinse aid Page 25.
Combined detergent Besides conventional separate detergents, a number of products are available with additional functions. These products contain not only detergent but also rinse aid and salt replacement substances (3in1) and, depending on the combination (4in1, 5in1, …), additional components such as glass protection or stainless steel cleaner. According to the manufacturers, combined detergents generally only function up to a water hardness of 26 °E. With a water hardness above 26 °E you will need to add special salt and rinse aid. For the best washing and drying results we recommend using special salt and rinse aid from a water hardness of 17 °E. If you are using combined detergent, the washing programme is adjusted automatically to ensure the best possible washing and drying result.
12.2Unsuitable detergents
Do not use detergent which could cause damage to the appliance or present a risk to health.
Hand washing-up liquid Hand washing-up liquid can cause increased frothing and damage the appliance.
Detergent containing chlorine Chlorine residue on tableware may present a risk to health.

Detergenten
12.3Information on detergents
Follow the instructions on detergents in everyday use. ¡ Detergents marked as “organic” or
“ecological” (environmentally friendly) generally contain lower levels of active agents or completely dispense with certain substances. The cleaning effect may be restricted here. ¡ Set the rinse aid and the water softening system to the separate detergent or combined detergent in use. ¡ According to the manufacturers, combined detergents with salt replacement substances can only be used up to a certain water hardness, usually 26 °E, without adding special salt. For the best washing and drying results we recommend using special salt from a water hardness of 17 °E. ¡ To prevent sticking, only touch detergents in a water-soluble pouch with dry hands and only ever place them in a dry detergent dispenser. ¡ Even if the rinse aid and special salt refill indicators light up, washing programmes will run properly with combined detergents. ¡ The function of rinse aid is limited with combined detergents. You will generally get better results using a separate rinse aid. ¡ Use tablets with a special drying performance.
12.4Adding detergent
1. To open the detergent dispenser, press the locking latch.
27

enTableware
2. Add the detergent to the dry detergent dispenser.
50 ml 25 ml 15 ml

3. Close the lid of the detergent dispenser.

If you are using tablets, one is enough. Insert the tablets in a horizontal position. If you are using powder or liquid detergent, follow the manufacturer’s instructions and quantities for dosage in the detergent dispenser. 20 ml ­ 25 ml detergent is sufficient for normal soiling. If tableware is only lightly soiled, slightly less than the amount of detergent specified is usually sufficient.

a The lid clicks into position. a The detergent dispenser will open
automatically at the optimum time during the programme. Powder or liquid detergent will spread around the washing tank and dissolve there. Tablets will fall into the tablet collecting tray and dissolve in the right dosage. In order to ensure that tablets can dissolve evenly, do not place any other objects in the tablet collecting tray. Tip: If you use powder detergent and select a program with pre-rinse, you can also add a little detergent to the interior door of the appliance.

13Tableware Tableware
Only Tableware clean tableware that is suitable for dishwashers. Note: Decorated glassware and parts made of aluminium or silver may fade or discolour with dishwashing. Delicate types of glass may turn cloudy after a few washing cycles.

28

13.1Damage to glass and tableware

Only put glasses and china in the dishwasher if it is marked as dishwasher- safe by the manufacturer. Avoid damage to glass and tableware.

Cause

Recommendation

The following

Only put table-

tableware is not ware in the dish-

dishwasher-safe: washer if it is

¡ Items of cut- marked as dish-

lery and table- washer-safe by

ware made the manufacturer.

from wood

¡ Decorated

glassware, an-

tique and

hand-crafted

tableware

¡ Plastic parts

not resistant to

heat

¡ Tableware

made from

copper or tin

¡ Tableware

soiled with

ash, wax, lub-

ricating grease

or paint

¡ Very small

items of table-

ware

The chemical

Use a detergent

composition of marked by the

detergent causes manufacturer as

damage.

gentle on table-

ware.

Tablewareen

Cause

Recommendation

Highly caustic al- If you are using

kaline or highly highly caustic al-

acidic cleaning kaline or highly

solutions, in par- acidic cleaning

ticular commer- agents, in partic-

cial or industrial ular commercial

cleaners, are not or industrial

safe to use in the cleaning agents,

dishwasher with do not put alu-

aluminium.

minium parts in

the dishwasher

interior.

The water temperature of the programme is too high.

Select a programme with lower temperatures. After the programme has ended, take glassware and cutlery out of the appliance without delay.

13.2Arrange tableware
Arrange tableware correctly to optimise the dishwashing result and prevent damage to both the appliance and tableware. Note Load the baskets so that no projecting items of tableware interfere with closing of the door. Projecting items of tableware may push the appliance door open during the programme, so

29

enTableware allowing steam to escape and water to leak out around the door. This could damage your kitchen units.
Tips ¡ Using the appliance allows you to
save energy and water compared to washing-up by hand. ¡ See our website for examples of how to load your appliance efficiently. ¡ To save energy and water, load the machine with the number of place settings specified (standard load with tableware and cutlery). “Technical specifications”, Page 50 ¡ For better washing and drying results, position items with curves or recesses at an angle so water can run off.

To save resources, do not prerinse tableware under running water. 2. Observe the following when arranging tableware: ­ Put heavily soiled tableware in
the bottom basket, e.g. pans. The more powerful the spray jet, the better the dishwashing result will be. ­ To prevent damage to tableware, arrange it so it is stable and cannot tip over. ­ To prevent injury, arrange cutlery with the points and sharp edges facing down. ­ Position containers with the openings facing down so no water can collect in them. ­ Do not block the spray arms make sure that they can turn freely. ­ Do not place small parts in the tablet collecting tray and do not block it with tableware so as not to obstruct the lid of the detergent dispenser.

1. Remove large remnants of food from tableware.
30

13.3Removing tableware
WARNING Risk of injury! Hot tableware can cause burns to the skin. When hot, tableware is sensitive to shock, may crack and can result in injury. When the programme has ended,
do not empty the appliance until the tableware has cooled down for a while. 1. To prevent water dripping on the tableware, unload it starting at the bottom and working up. 2. Check the washing tank and accessories for soiling and clean if necessary. “Cleaning and servicing”, Page 37
14Basic operation Basicoperation

Basic operation

14.1Switching on the appliance
Press . The Eco 50° programme is set by default. The Eco 50° programme is especially environmentally friendly and ideal for normally soiled tableware. It is the most efficient programme for the combination of energy/water consumption for this type of tableware and evidences conformity with the EU Ecodesign Directive. If you do not perform any actions on the appliance for 10 minutes, the appliance will automatically switch off.

Basic operationen
14.2Setting a programme
To adjust the washing programme to the soiling level of the tableware, select a suitable programme.
Press the right programme button. a The programme is set and the pro-
gramme button flashes. a The remaining running time of the
programme appears on the display.
14.3Setting additional functions
You can set additional functions to complete the washing programme selected. Note: The additional functions which can be used depend on the programme selected. Press the button for the relevant
additional function. “Additional functions”, Page 19 a The additional function is set and the additional function button flashes.
14.4Setting timer programming
You can delay the start of the programme by up to 24 hours. 1. Press . a “h:01” appears in the display. 2. Use to set the required start
time for the programme. 3. Press . a This activates timer programming. Tip: To deactivate timer programming, press repeatedly until “h:00” appears in the display.

31

enBasic operation
14.5Starting the programme
Press . a The programme has ended when
the display shows “0h:00m”. Notes ¡ If you want to add more tableware
while the appliance is running, do not use the tablet collecting tray as a handle for the top basket. You might touch the partially dissolved tablet. ¡ You can only change a programme when running if you cancel it. “Terminate programme”, Page 32 ¡ The appliance switches off automatically 1 minute after the end of the programme to save energy. If you open the appliance door immediately after the programme has ended, the appliance will switch off after 4 seconds.
14.6Interrupting programme
Note: When you open the appliance door once the appliance has heated up, leave the door slightly ajar for a few minutes and then close it. This will help prevent excess pressure building up in the appliance and stop the appliance door bursting open. 1. Open the appliance door carefully. 2. Press . a The programme is saved and the
appliance switches off. 3. Press to resume the pro-
gramme. 4. Close the appliance door.

14.7Terminate programme

To end a programme early or to

switch from a programme that has

already started, you will need to can-

cel it first.

1. Open the appliance door.

2. Press

for approx.

4 seconds.

3. Close the appliance door.

a The programme is cancelled and

ends after approx. 1 minute.

14.8Switching off appliance
1. Please note the information on Safe use Page 10.
2. Press . Tip: If you press during the wash cycle, the programme currently running will be interrupted. When you switch the appliance back on, the programme continues automatically.

32

Basic settingsen

15Basic settings Basicsettings

You Basicsettings can configure the basic settings for your appliance to meet your needs.

15.1Overview of the basic settings
The basic settings depend on the features of your appliance.

Basic setting

Display text Selection

Description

Water hardness H04 1

H00 – H07

Set the water softening system to your water hardness. “Setting the water softening system”, Page 23 Level H00 switches the water softening system off.

Rinse aid dispensing

r05 1

r00 – r06

Set the amount of rinse aid to be dispensed. Switch the rinse aid system off with level r00.

Intensive drying d00 1

d00 – d01

The temperature is increased during the final rinse, which improves the drying result. This may increase the run time slightly.

Note: Not suitable for delicate items of tableware.

Switch Extra Dry on “d01” or off “d00”.

Hot water

A00 1

A00 – A01

Set cold water or hot water connection. Only set the appliance to hot water if this can be prepared with little energy and a suitable installation is available, e.g. solar heating system with circulation line. The water temperature should be at least 40 °C and max. 60 °C. Switch hot water on “A01” or off “A00”.

1 Factory setting (may vary according to model)

33

enBasic settings

Basic setting

Display text Selection

Description

InfoLight

I01 1

I00 – I01

Switch InfoLight on or off. While the programme is running, a spot of light is projected onto the floor below the appliance door. This light will not be visible if the appliance is installed at eye level with the cabinet front fitted flush. If the appliance door is not completely closed, the spot of light will flash. The programme has ended when the spot of light is no longer visible on the floor. Level “I00” switches InfoLightoff.

Tone volume

b02 1

b00 – b03

Adjustment of tone volume. Level “b00” switches the signal tone off.

Wi-Fi

Cn0

Cn0 – Cn1

Switch the wireless network

connection on or off.

Level “Cn0” switches the

wireless network connection

off.

This basic setting is not

available until you have con-

nected the appliance with

the Home Connect app.

“Home Connect “,

Page 35

1 Factory setting (may vary according to model)

34

Home Connecten

Basic setting

Display text Selection

Description

Remote Start

rc1

rc0 – rc2

Activate or deactivate “Remote Start “, Page 36. The following settings are possible: ¡ With the setting “rc0”, the
function is permanently deactivated. ¡ With the setting “rc1”, the function can be selected via the button. “Activating Remote Start “, Page 36 ¡ With the setting “rc2”, the function is permanently activated.

This basic setting is not available until after you have connected the device with the Home Connect app. “Home Connect “, Page 35

Factory setting rE

Start with YES Confirm with

Restore changed settings to the factory settings. The settings for initial startup must be configured.

1 Factory setting (may vary according to model)

15.2Changing basic settings

Tip: Connect your appliance to a mobile device. You can conveniently change all settings via the Home Connect app. “Home Connect “, Page 35

1. Open the appliance door. 2. Press . 3. To open the basic settings, press
for 3 seconds.

a The display shows Hxx.

a The display shows .

4. Press

repeatedly until

the display shows the required set-

ting.

5. Press

repeatedly until the dis-

play shows the right value.

You can change several settings.

6. To save the settings, press for 3 seconds.

7. Close the appliance door.

16Home Connect HomeConnect
This HomeConnect appliance is network-capable. Connect your appliance to a mobile device to control its functions via the Home Connect app. The Home Connect services are not available in every country. The availability of the Home Connect function

35

enHome Connect
depends on the availability of Home Connect services in your country. You can find information about this at: www.home-connect.com. To be able to use Home Connect, you must first set up the connection to the WLAN home network (Wi- Fi1) and to the Home Connect app.
The Home Connect app guides you through the entire login process. Follow the instructions in the Home Connect app to configure the settings. Tip: Please also follow the instructions in the Home Connect app. Note: Please note the safety precautions in this instruction manual and make sure that they are also observed when operating the appliance via the Home Connect app. “Safety”, Page 4
16.1Setting up the Home Connect app
1. Install the Home Connect app on your mobile device.
2. Start the Home Connect app and set up access for Home Connect. The Home Connect app guides you through the entire login process.
16.2Setting up Home Connect
Requirements ¡ The Home Connect app has been
installed on your mobile device. ¡ The appliance is receiving signals
from the WLAN home network (WiFi) at its installation location.

1. Open the Home Connect app and scan the following QR code.
2. Follow the instructions in the Home Connect app.
16.3Remote Start
You can use the Home Connect app to start the appliance with your mobile device. Tip: If you select “rc2” in the Basic settings Page 35 of this function, the function is permanently activated and you can start your appliance with a mobile device at any time. Activating Remote Start When you have selected “rc1” in the basic settings of this function, activate the function on your appliance. Requirements ¡ The appliance is connected to your
WLAN home network. ¡ The appliance is connected to the
Home Connect app. ¡ “rc1” is selected in the Basic set-
tings Page 35 of this function. ¡ A programme is selected. Press .
If you open the appliance door, the function is automatically deactivated. a button lights up. Tip: To deactivate the function, press .

1 Wi-Fi is a registered trademark of the Wi-Fi Alliance. 36

16.4Data protection
Please see the information on data protection. The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the Home Connect server (initial registration): ¡ Unique appliance identification
(consisting of appliance codes as well as the MAC address of the Wi-Fi communication module installed). ¡ Security certificate of the Wi-Fi communication module (to ensure a secure data connection). ¡ The current software and hardware version of your appliance. ¡ Status of any previous reset to factory settings. This initial registration prepares the Home Connect functions for use and is only required when you want to use the Home Connect functions for the first time. Note: Please note that the Home Connect functions can only be utilised with the Home Connect app. Information on data protection can be retrieved in the Home Connect app.

Cleaning and servicingen

17Cleaning and servi- Cleaningandservicing cing
To keep your appliance working effi- Cleaningandservicing ciently for a long time, it is important to clean and maintain it carefully.
17.1Cleaning the tub

WARNING Risk of harm to health! Using detergents containing chlorine may result in harm to health. Never use detergents containing
chlorine. 1. Remove any coarse soiling in the
interior with a damp cloth. 2. Add detergent to the detergent dis-
penser. 3. Select the programme with the
highest temperature. 4. Start the programme without table-
ware. Page 32

17.2Cleaning products
Only use suitable cleaning products to clean your appliance. “Safe use”, Page 10

17.3Tips on appliance care

Follow the tips on appliance care to make sure your appliance functions properly at all times.

Action

Benefit

Wipe the door This ensures the seals, the front of parts of the applithe dishwasher ance will remain and the control clean and hypanel regularly gienic. using a damp cloth and washing-up liquid.

37

enCleaning and servicing

Action

Benefit

If the appliance This will prevent

is not going to unpleasant

be used for a

odours.

while, leave the

door slightly ajar.

17.4Machine Care
Deposits, e.g. from remnants of food and limescale, can cause your appliance to malfunction. To avoid such faults and reduce odours, we recommend cleaning your appliance at regular intervals. Machine Care combined with machine care products and machine cleaners is the right programme for the care of your appliance.

Tip: You can get our tested and approved Dishwasher Care and Machine Cleaner for Dishwashers online at https://www.bosch-home.com/ store or from customer service. Machine Care is a programme which removes various deposits in one washing cycle. Cleaning takes place in two phases:

Phase 1
2

Removal of Grease and limescale
Food remnants and deposits

Detergent Liquid machine care product or machine descaler in powder form. Machine cleaner

Placement Appliance interior, e.g. bottle hung in the cutlery basket or powder in the interior. Detergent dispenser

To ensure optimum cleaning performance, the programme doses the detergents independently of each another during the relevant cleaning phase. Correct placement of the detergents is necessary here. Run Machine Care without tableware if the indicator for Machine Care lights up on the control panel or if advised to do so by the display. The indicator will go out after you have run Machine Care. If your appliance does not have a reminder function, we recommend performing Machine Care every 2 months.

Running Machine Care Notes ¡ Run the Machine Care programme
without any tableware in the dishwasher. ¡ Only use machine care products and machine cleaners specially designed for dishwashers. ¡ Make sure that there are no aluminium parts, e.g. extractor hood grease filters or aluminium pans, in the interior of the appliance. ¡ If you have not run Machine Care after 3 washing cycles, the indicator for Machine Care will go out automatically. ¡ For optimum cleaning performance, ensure the correct placement of cleaners.

38

¡ Follow the safety instructions given on the packagings of the machine care products and machine cleaners.
1. Remove any coarse soiling in the interior with a damp cloth.
2. Clean the filters. 3. Place the machine care product in
the appliance interior. Only use machine care products specially designed for dishwashers. 4. Pour the machine cleaner into the detergent dispenser until it is filled completely. Do not place any additional machine cleaner in the appliance interior. 5. Press . 6. Press . a Machine Care is run. a Once the programme has ended, the indicator for Machine Care goes out.
17.5Filter system
The filter system removes coarse soiling from the dishwashing cycle.

Cleaning and servicing

Cleaning filters Soiling in the dishwashing water may block the filters. 1. After each wash check the filters
for residue. 2. Turn the coarse filter anticlockwise
and remove the filter system . Check that no foreign objects
fall into the sump.
2
1
3. Pull down the micro filter to remove.

3

2

1
1 Micro filter 2 Fine filter 3 Coarse filter
39

enCleaning and servicing 4. Press the locking catches to-
gether and lift the coarse filter out . 2 1

17.6Cleaning spray arms
Limescale and soiling in the dishwashing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. 1. Unscrew the upper spray arm
and pull down to remove .

5. Clean the filter elements under running water. Carefully clean the rim of dirt between the coarse and the fine filter.
6. Re-assemble the filter system. Make sure that the locking catches on the coarse filter click into position.
7. Insert the filter system into the appliance and turn the coarse filter clockwise. Make sure that the arrow markings match up.

1
2
2. Pull up the lower spray arm to remove.

3. Check the outlet nozzles on the spray arms for blockages under running water and remove any foreign bodies.
4. Insert the lower spray arm.
a The spray arm clicks into position. 5. Insert the upper spray arm and
screw it firmly in place.

40

Troubleshooting

18Troubleshooting Troubleshooting
You Troubleshooting can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs. Tip: You can find further information and explanations on troubleshooting online by scanning the QR code in the table of contents and on our website www.bosch-home.com.

WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist
staff. Only use genuine spare parts when repairing the appliance. If the power cord of this appliance is damaged, it must be replaced with a
special connection cable, which is available from the manufacturer or his Customer Service.

Fault

Cause and troubleshooting

Display “Check water supply” flashes

A technical fault is present. 1. Press . 2. Unplug the appliance or switch off the fuse. 3. Wait at least 2 minutes. 4. Insert the mains plug of the appliance in a socket
or switch on the fuse. 5. Switch the appliance on. 6. If the problem occurs again:
Press . Turn off the water tap. Pull out the mains plug. Contact Customer Service Page 48 and give
the error code.

E:30-00 will light up alternately.

Water protection system is activated. 1. Turn off the water tap. 2. Call Customer Service Page 48.

E:31-00 will light up alternately.

Water protection system is activated. 1. Turn off the water tap. 2. Call Customer Service Page 48.

E:32-00 will light up Supply hose is kinked.

alternately or indicator for water supply lights up.

Install the inlet hose without kinks. Water tap is turned off. Turn on the water tap.

41

enTroubleshooting

Fault

Cause and troubleshooting

E:32-00 will light up Water tap is jammed or furred up.

alternately or indicator for water supply lights up.

Turn on the water tap. The flow rate must be at least 10 l/min when the water supply is open.

The filters in the water connection of the supply or AquaStop hose are blocked. 1. Switch off the appliance. 2. Pull out the mains plug. 3. Turn off the water tap. 4. Unscrew the water connection. 5. Remove the filter from the inlet hose

E:34-00 will light up alternately. E:61-02 will light up alternately.

6. Clean the filter. 7. Re-insert the filter in the inlet hose. 8. Screw the water connection back on. 9. Check the water connection for leaks. 10.Restore the power supply. 11.Switch the appliance on. Water is continuously running into the appliance. 1. Turn off the water tap. 2. Call Customer Service Page 48. Not an appliance fault. Wastewater pump is blocked or the cover of the wastewater pump is loose. 1. Clean the wastewater pump.
“Clean wastewater pump”, Page 47 2. Secure the cover of the wastewater pump so it
clicks into position. “Clean wastewater pump”, Page 47

42

Fault E:61-03 will light up alternately. Water is not drained.

Troubleshootingen
Cause and troubleshooting Not an appliance fault. Siphon connection is still closed or the wastewater hose is kinked or blocked. 1. Check the connection to the siphon and open if ne-
cessary. 2. Install wastewater hose without kinks. 3. Remove residues.

Not an appliance fault. Wastewater pump is blocked or the cover of the wastewater pump is loose. 1. Clean the wastewater pump.
“Clean wastewater pump”, Page 47 2. Secure the cover of the wastewater pump so it
clicks into position. “Clean wastewater pump”, Page 47

E:92-40 will light up alternately.

Filters are soiled or blocked. Clean the filters.
“Cleaning filters”, Page 39

All LEDs lit up or flashing.

A software update is possibly installing. 1. Wait until the software update has been installed.
This process can take approx. 30 minutes. 2. If the appliance is not ready to use after
30 minutes, perform a reset. Press the main switch button for approx.
4 seconds. a Your appliance is resetting.
43

enTroubleshooting

Fault All LEDs lit up or flashing.
Remnants of food on tableware.

Cause and troubleshooting Electronics have detected a fault. 1. Press the main switch button for approx.
4 seconds. The appliance is reset and restarted. 2. If the problem occurs again: Switch off the appliance. Pull out the mains plug or switch off the fuse in
the fuse box. Wait at least 2 minutes. Switch on the fuse in the fuse box or insert the
mains plug. Switch the appliance on. 3. If the problem occurs again: Contact customer service.
“Customer Service”, Page 48
Tableware is placed too close together or basket is overfilled. 1. Arrange tableware with sufficient space in between.
The spray jets must reach the surfaces of the tableware. 2. Avoid points of contact.

Spray arm rotation is blocked. Arrange tableware so that it does not obstruct
spray arm rotation. Spray arm nozzles are blocked. Clean the Spray arms Page 40.

Filters are soiled. Clean the filters.
“Cleaning filters”, Page 39 44

Fault Remnants of food on tableware.

Cause and troubleshooting

Troubleshootingen

Filters are inserted incorrectly and/or not engaged. 1. Insert the filters properly.
“Filter system”, Page 39 2. Engage the filters.

Washing programme selected too weak. Select a more intensive washing programme.
“Programmes”, Page 17

Tableware has been precleaned too intensely. The sensors chose a weaker programme. Stubborn soiling cannot be entirely removed. Only remove large remnants of food and do not
prerinse tableware.

Tall narrow receptacles in corner areas are not rinsed adequately. Do not position tall narrow receptacles at too great
an angle or in corner areas.

Top baskets on right and left are not set to same height. Set the upper basket on the left and right to the
same height. “Top basket”, Page 20

Removable streaks Amount of rinse aid to be dispensed is set too high.

are present on glasses, glassware

Set the rinse aid system to a lower setting. “Setting the amount of rinse aid”, Page 25

with a metallic appearance and cutlery.

No rinse aid has been added. Add rinse aid.

“Adding rinse aid”, Page 25

Detergent residue is present in the final rinse. Lid of the detergent dispenser is blocked by tableware items and will not open fully. 1. Arrange tableware in the top basket tableware so
the tab collecting tray is not obstructed by tableware. “Arrange tableware”, Page 29 Items of tableware are blocking the dispenser lid.

45

enTroubleshooting

Fault

Cause and troubleshooting

Removable streaks 2. Do not place tableware or fragrance dispensers in

are present on

the tablet collecting tray.

glasses, glassware with a metallic appearance and cutlery.

Tableware has been precleaned too intensely. The sensors chose a weaker programme. Stubborn soiling cannot be entirely removed.

Only remove large remnants of food and do not prerinse tableware.

Rust spots on cutlery. Cutlery is not sufficiently rust-resistant. Knife blades are often more severely affected. Use rust-resistant tableware.

Cutlery may also rust if washed together with rusting items. Do not wash rusting items.

Salt content in washing water is too high. 1. Remove any spilled special salt from the tub. 2. Screw the cap of the special salt dispenser on tight.

Detergent residue is present in the detergent dispenser or the tablet collecting tray.

Spray arms were blocked by tableware so detergent was not rinsed out. Check that the spray arms are not blocked and can
rotate freely.

Detergent dispenser was damp when detergent was added. Only add detergent to a detergent dispenser when
dry.

Special salt refill indic- Insufficient special salt.

ator lights up.

Add Special salt Page 23.

Sensor does not detect special salt tablets. Do not use special salt tablets.

46

18.1Clean wastewater pump
Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned.
WARNING Risk of injury! Sharp and pointed objects or fragments of glass may block the waste water pump and cause injury. Remove any foreign bodies care-
fully. 1. Disconnect the appliance from the
power supply. 2. Remove the top and bottom bas-
ket. 3. Remove the filter system. 4. Scoop out any water.
Use a sponge if necessary. 5. Prise off the pump cover using a
spoon and grip it by the crosspiece.
6. Lift the pump cover inwards at an angle and remove.
a You can now reach the impeller with your hand.
7. Remove any remnants of food and foreign bodies in the area of the impeller.

Transportation, storage and disposalen 8. Insert the pump cover and press
down .
2 1
a The pump cover clicks into position.
9. Install the filter system. 10.Insert the top and bottom basket.
19Transportation, stor- Transportation,storageanddisposal age and disposal
Transportation, storage and disposal
19.1Removing the appliance
1. Disconnect the appliance from the mains power supply.
2. Turn off the water tap. 3. Detach the drainage connection. 4. Detach the drinking water connec-
tion. 5. Loosen any screws fastening the
appliance to cabinet parts. 6. Remove the base panel if fitted. 7. Pull the appliance out carefully,
along with the hose behind it.

47

enCustomer Service
19.2Protect appliance from frost
If there is a risk of frost where the appliance will be standing, e.g. in a holiday home, empty the appliance completely. Empty the appliance.
“Transporting the appliance”, Page 48
19.3Transporting the appliance
To avoid damage to the appliance, empty it before transporting. Note: Always transport the appliance upright to prevent residual water getting into the machine’s controls and damaging the appliance. 1. Remove tableware from the appli-
ance. 2. Secure loose parts. 3. Switch on the appliance.
Page 31 4. Select the programme with the
highest temperature. “Programmes”, Page 17 5. Start the programme. Page 32 6. To drain the appliance, terminate the programme after approx. 4 minutes. “Terminate programme”, Page 32 7. Switch off the appliance. Page 32 8. Turn off the tap. 9. To empty the residual water out of the appliance, detach the supply hose and let the water drain out.
48

19.4Disposing of old appliance
Valuable raw materials can be reused by recycling.
WARNING Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. With redundant appliances, unplug
the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close. 1. Unplug the appliance from the mains. 2. Cut through the power cord. 3. Dispose of the appliance in an environmentally friendly manner. Information about current disposal methods are available from your specialist dealer or local authority.
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
20Customer Service CustomerService
Function-relevant CustomerService genuine spare parts according to the corresponding Ecodesign Order can be obtained from

Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area. Note: Under the terms of the manufacturer’s warranty the use of Customer Service is free of charge. Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website. If you contact Customer Service, you will require the product number (ENr.), the production number (FD) and the consecutive numbering (Z-Nr.) of your appliance. The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.
20.1Product number (E-Nr.), production number (FD) and consecutive numbering (Z-Nr.)
You can find the product number (ENr.), the production number (FD) and the consecutive numbering (Z-Nr.) on the appliance’s rating plate. The rating plate is located inside the appliance door. Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly.

Customer Serviceen
20.2AQUA-STOP guarantee
In addition to warranty claims against the seller under the purchase agreement and in addition to our manufacturer’s warranty, we offer compensation under the following conditions. ¡ If our Aqua-Stop system is defect-
ive and causes water damage, we will make good the damage for private users. To ensure protection from water damage, the appliance must be connected to the power supply. ¡ The liability guarantee is valid for the service life of the appliance. ¡ A claim can only be made under the guarantee if the appliance has been correctly installed and connected with Aqua-Stop according to our instructions; this also includes correctly fitting the AquaStop extension (genuine accessory). Our guarantee does not cover defective supply lines or fittings up to the Aqua-Stop connection on the tap. ¡ If your appliance is fitted with Aqua-Stop, you can in principle leave your appliance unattended during operation and the tap turned on afterwards. The tap only needs to be turned off if you are away from home for a long period, e.g. on holiday for several weeks.

49

enTechnical specifications

21Technical specifications Technicalspecifications

Technical specifications
Weight Voltage Power rating Fuse Water pressure
Inlet rate Water temperature
Capacity

Max.: 60 kg 220 – 240 V, 50 Hz or 60 Hz 2000 – 2400 W 10 – 16 A ¡ min. 50 kPa (0.5 bar) ¡ max. 1000 kPa (10 bar) Min. 10 l/min Cold water. Hot water max.: 60 °C 14 place settings

More information about your model can be found online at https:// eprel.ec.europa.eu/qr/13193291. This web address is linked to the official EU EPREL product database.
21.1Information regarding Free and Open Source Software
This product includes software components that are licensed by the copyright holders as free or open source software. The applicable licence information is stored on your home appliance. You can also access the applicable licence information via your Home Connect app: “Profile -> Legal information -> Licence Information”.2 You can download the licence information on the brand product website. (Please search on the product website for your appliance model and additional documents). Alternatively, you can request the relevant information from oss-

request@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str. 34, 81739 Munich, Germany. The source code will be made available to you on request. Please send your request to ossrequest@bshg.com or BSH Hausgeräte GmbH, Carl-Wery-Str.34, 81739 Munich, Germany. Subject: ,,OSSREQUEST” The cost of performing your request will be charged to you. This offer is valid for three years from the date of purchase or at least as long as we offer support and spare parts for the relevant appliance.
22Declaration of Con- DeclarationofConformity formity
BSH Hausgeräte GmbH hereby de- DeclarationofConformity clares that the appliance with Home Connect functionality conforms to the

1 Only applies to countries in the European Economic Area 2 Depending on the appliance specifications 50

essential requirements and other relevant provisions of Directive 2014/53/EU. A detailed RED Declaration of Conformity can be found online at www.bosch- home.com among the additional documents on the product page for your appliance. Hereby, BSH Hausgeräte GmbH declares that the appliance with Home Connect functionality is in compliance with relevant statutory requirements.1

Declaration of Conformityen A detailed Declaration of Conformity can be found online at www.boschhome.co.uk among the additional documents on the product page for your appliance.1
2.4 GHz band (2400­2483.5 MHz): Max. 100 mW 5-GHz band (5150­5350 MHz + 5470­5725 MHz): max. 150 mW

BE BG CZ DK DE EE

IE

FR HR IT

CY LI

LV

LT

MT NL AT PL PT RO

SI

SE NO CH TR IS

UK (NI)

5 GHz WLAN (Wi-Fi): For indoor use only.

EL ES LU HU SK FI

AL

BA

MD

ME

MK

RS

UK

UA

5 GHz WLAN (Wi-Fi): For indoor use only.

22.1Statement of Compliance for Great Britain
The full Statement of Compliance according to the Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023 can be found online at www.bosch- home.co.uk among the additional documents on the product page for your appliance.
Product type This statement of compliance covers the products described in this information for use whose model identifier group is seen on the title page. The

full model identifier is made up of the characters before the slash in the product number (E no.) which can be found on the rating plate. Alternatively, you can also find the model identifier in the first line of the UK Energy Label. Name and address of manufacturer BSH Hausgeräte GmbH, Carl-WeryStrasse 34, 81739 München, Germany This statement of compliance is prepared by the manufacturer.

1 Only applies to Great Britain 51

enDeclaration of Conformity The manufacturer, BSH Hausgeräte GmbH deems that it has complied with ¡ provision 5.1-1 of ETSI EN 303
645 v2.1.1 and, where relevant, provision 5.1-2 of ETSI EN 303 645 v2.1.1; ¡ provision 5.2-1 of ETSI EN 303 645 v2.1.1; ¡ provision 5.3-13 of ETSI EN 303 645 v2.1.1. Support period BSH Hausgeräte GmbH will provide security updates that are necessary to maintain the main functions free of charge until at least 28/02/2034.
52

Thank you for buying a Bosch Home Appliance!
Register your new device on MyBosch now and profit directly from:
· Expert tips & tricks for your appliance · Warranty extension options · Discounts for accessories & spare-parts · Digital manual and all appliance data at hand · Easy access to Bosch Home Appliances Service
Free and easy registration ­ also on mobile phones: www.bosch-home.com/welcome

Looking for help? You’ll find it here.

Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.

BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY www.bosch- home.com
A Bosch Company
9001778747
9001778747 (040309) 642 V5 en

Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom

References

• Appliances.com
• Home Appliances Global Website | Bosch
• Home.co.uk: Property Search, Homes For Sale, Estate Agents, Sell Your House
• Bosch home appliances: Experience quality, reliability and precision | Bosch UK
• Home Appliances Global Website | Bosch
• Bosch Service | Service worldwide
• Welcome to MyBosch
• Connect your household | Home Connect
• Home Appliances Global Website | Bosch
• Find your Bosch Online Shop | BOSCH

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>