NRadio Technologies N300 4G Pocket Size LTE Modem Router User Manual
- June 14, 2024
- NRadio Technologies
Table of Contents
NRadio Technologies N300 4G Pocket Size LTE Modem Router
Upgrade to the latest firmware. #Very important#
Firmware Download Address: https://www.nradiowifi.net/support/download- center/
Firmware upgrade steps
- Download the firmware to your local device. Do not make any changes to the firmware after the download is completed.
- Enter http://192.168.66.1.in the address field of the web browser.
- Go to Advanced Settings -> System -> Flash Firmware -> Local firmware upgrade ->Choose File -> Upgrade
- Wait for the upgrade to complete. Do not disconnect power during firmware upgrading.
How to find us
- The official website of NRadio: https://www.nradiowifi.net/
- The customer support of NRadio: support@nradiowifi.com
- For Business contact: nradiowifi@gmail.com
- Ins: nradiowifi
- TikTok: nradiowifi
- FB: nradiowifi
Q1. What should I do if I cannot access the web management page?
1 . If the computer is set to a static IP address, change its settings to obtain an IP address automatically. 2. Make sure 192. 168.66. 1 is correctly entered in the web browser. 3 . Try again with another web browser. 4. Try again by rebooting your router. 5 . Try Disabling and enabling the active network adapter in use.
Q2. How do I restore the router to its factory default settings?
1 . With the router powered on, press and hold the RST button for 6 seconds before releasing. Wait until the router reboots. 2 . Log in to the web management page of the router, and go to Advanced > Backup/ Flash Firmware, click “Reset device” and wait until the reset process is complete. 3. What can I do if I forget my wireless network password? The default wireless password is printed on the product label of the router. If the default wireless password has been changed, log in to the router's web management page and retrieve or reset your password.
Q3. What should I do if my internet speed is slow?
1. Make sure you are inside a network coverage area. 2 . Relocate your router and your computer for a better signal reception. You may be in or near a structure that is blocking the signal. Obstacles like walls, ceilings, and furniture between the router and other wireless devices decreases the signal strength.
Q4. What can I do if I cannot access the Internet?
• Verify that your SIM card is an NR or LTE card. • Verify that your SIM card is in your ISP’s service area. • Verify that your SIM card has sufficient credit. • Check the LAN connection: Enter 192. 168.66. 1 in the address bar of a web browser. If the login page does not appear, try again referring to FAQ > Q1. • Check your APN parameters: 1 .Open a web browser and log in to the web management page. 2. Verify that the APN parameters provided by your ISP are correctly entered. If the parameters are incorrect, create a new profile with the correct parameters. • Check the PIN settings: 1 .Open a web browser and log in to the web management page. 2.Verify if PIN is required. If it is, enter the correct PIN provided by your ISP. • Check the Data Limit: 1 .Open a web browser and log in to the web management page. 2.Verify if the total used data exceeds the total allowance. If it does, correct the total allowance and set the total used data to 0, or disable the data limit. • Check the Data Roaming: 1 . Confirm with your ISP if you are in a roaming service area. If you are, open a web browser and log in to the web management page. 2 .Enable the data roaming to access the Internet.
Q5 .How to choose the correct Network Mode?
1 . PPPoE: When a username and passwords are provided by the ISP, you can choose this mode. 2 . DHCP Client: Obtain IP address from other devices or ISP automatically. DHCP Client is the router’ s default mode. 3 . Static IP: When the ISP provides a static IP parameter, you can choose this mode.
Q6.How to Set up Cellular Only or Cellular Backup?
If you already have a device or your Internet comes via an Ethernet cable from the wall or other device, you can set up the router as “ Cellular Backup” mode. The router will choose the Ethernet cable as the priority method and cellular as the backup method to Internet. If the Ethernet cable cannot connect to the Internet, the router will use cellular to Internet automatically. After Ethernet cable returning to normal, the router will use Ethernet cable to Internet again. 1 . Launch a web browser from the connected computer or device. 2.In the address field of the web browser, enter http://192.168.66.1. 3. In the Password field, enter the default password admin and click the Log in button. 4.Go to Advanced Settings -> Internet - > Cellular Type - > Cellular Backup. 5. Select the correct Network Mode. 6.Click “Save” button.
Q7 .How to add and activate a custom APN Profile?
If your ISP settings are not detected by the router, you may want to create an internet connection profile. Click
Q8.How to use the 4G router?
1. Insert a 4G Nano SIM card make sure the SIM card is activated and you have purchased a data plan before inserting it into the router Connect to power and wait 1-2 minutes to get signal Connect the 4G router via LAN port or WIFI Open a browser and manually enter the URL to check the cellular status If the device cant reidentify APN automatically then please click the setting of Cellular Settings APN Options to add APN manually. If you encounter any problems, please follow the instructions below Please refer to the user manual included in the package. Press the reset button for 10 seconds to restore the router to factory default settings. If it still does not work, please contact our support team.