tuya GM3 Fingerprint Smart Door Lock User Manual
- June 1, 2024
- Tuya
Table of Contents
GM3 Fingerprint Smart
Door Lock
User Manual
GM3 Fingerprint Smart Door Lock
-
The productis a Tuya Bluetooth the administrator of the APP is the ultimate administrator of the lock, and the operation function of the lock end is an auxiliary operation, please be sure to download the Smart Life APP to bind the administrator, unless it can be ensured that the lock will not be used by unrelated people APP is bundled.
-
The square bar of the product needs to be
positioned to unlock normally. Please be sure to insert the square bar into the front handle to the end, and then position the square rod correctly according to the instruction manual -
Before itis installed on the door, be sure to insert the square rod into the bottom of the front handle and position it correctly before trying to twist the key to unlock it After the product s installed on the door, make sure the square rod is positioned correctly before twisting key. WARNING: Blindly twisting the key can mechanical failure of the product.
-
The front handle connecting wire terminal needs to be inserted into the female of the rear handle setting plate according to the marking (red to red), otherwise will cause a short circuit.
Parameters
Cover: D70mm / Lever: L150mm / Height:62mm
Material: Aluminum alloy s Acrylic
Available Thickness: 35mm ~ 55mm
Unlock Way: Key/Fingerprint/password/Tuya APP.
Power Supply: 4xAAA Alkaline Batterys
Emergency Supply: USB(Type-C Interface)
Working Voltage: 6V
Alarm Voltage :4.8V
Capacity: Fingerprint——S0sets
Password——100sets
Parts list
Overall
1. Front Handle | 6. Key | 11. Screw |
---|---|---|
2. Emergency powersupply | 7.Data Line | 12.Battery Gover |
3. Front Cover | 8.Spring | 13. Battery Box |
4. Hollow Square Bar | 9.Back Cover | 14.Data Line Interface |
5. Screw Bolt | 10.Back Handle | 15. Setting Button |
Installation
-
The square bar of the product needs to be positioned to unlock normally. Please be sure to insert the square bar into the front handle to the end, and then position the square rod correctly according to the instruction manual.
-
Before tis installed on the door, be sure to insert the square rod into the bottom of the front handle and position it correctly before trying to twist the key to unloc kit.
After the product is installed on the door, make sure the square rod is positioned correctly before twisting key. WARNING: Blindly twisting the key can cause mechanical failure of the product. -
The front handle connecting wire terminal needs to be inserted into the female seat of the rear handle setting plate according to the marking (red to red), otherwise it will cause a short circuit.
-
Drill holes on the door and install the lock body according to the drawings
-
Install the two screw bolts an the front cover, Insert the hollow square bar into the bottom of the front lever and let the data line stick out
-
(1)Rotate the bar to the bottom towards the handle direction.
(2)Then rotate back 90° to complete the positioning -
Insert the exterior assembly into the door hole
-
Install the interior assembly on the door.
Make sure the connection wire goes through the spring and the back handle. -
A. Tighten the door lock with two screws and connect the data cable.
B-Be sure to follow the markings (red to red) to connect the cable terminal to the female socket of the setting board, otherwise it will cause a short circuit in the product, -
Install 4 AAA alkaline batteries and the battery cover to complete the installation
-
As shown in the picture, press down to open the batery cover
Lock function setting
- Function and operation
- Administrator information: refers to the fingerprint and password of the administrator.
- Unlock information: refers to the entered fingerprints and passwords (including administrators and ordinary users)
- The “#” key has two modes:
A. It is the confirmation key or the function key for entering the menu;
B. The clear key/back key (click to clear when entering the password). - The operating system will automatically exit if there is no operation for more than 20 seconds.
- After the voltage is lower than 4.8V, it will prompt “low battery, please replace the battery” every time you unlock, please replace the battery in time.
- In Always unlock mode, click the setting button, and the voice broadcasts
“Always unlock mode, please lock soon.”
Click the setting button again and the voice broadcasts “Always unlock mode cancel”.
- Reset factory default state
- The factory administrator’s initial password is “123456”, In the initial state, any fingerprint can unlock the lock.
- Press and hold the setting button until you hear the fourth “beep” and the
red light of the fingerprint head lights up.
Release the setting button within 3 seconds when the red light lights up(timeout to exit the operation), and the original settings are restored successfully.
- Door lock function management
- Menu list
APP settings
Reminder: The product s Tuya Bluetooth lock, the administrator of the APP is the ultimate administrator of the lock, and the operation function the lock end is an auxiliary operation, please be sure to download the Smart Life APP t bind the administrator, unless it can be ensured that the lock will not be used by unrelated people AP is bundled.
-
Download and install the “Smart Life” APP from the application market.
Remarks: Users can also download the “Tuya Smart” APP, and the setting and usage methods are the same. -
After the installation is complete, follow the prompts to register and log in.
Users canals download and nstall the AP by scanning the QR code below:
https://a.smart321.com/tuyasmartlifeiot
-
Register an account and add devicesRegister an account with a mobile phone number
a, Click to add this device,
b, After the addition is successful, the voice prompts “connected”. -
Improve family information
-
Finger print and password enrolla.Enter the fingerprint, password and card information registration in the family.
b. Toregister a fingerprint, you need to press 6 times, and you can add a name note after entering the fingerprint. -
Delete fingerprints and passwords c. The password can be randomly generated or fixed, and the password needs o be copied or remembered.
-
0ne-time password
-
Log
-
More 1. Automatic locking: Normally open mode switch
2 Door lock volume: Mute setting, lock end entering men will broadcast voice;
3. Door lock language: Switch between Chinese and English -
Unbind
FCC warning:
-
This device should be installed and operated with minimum distance Ocmbetween the radiator & your body.
-
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
-
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>