Shark HP300 Air Purifier User Guide

Shark HP300 Air Purifier

Product Information

• Specifications
  • Product: Air Purifier HP300 Series
  • Intended Use: Household use only
  • Power Cord: Polarized plug
  • Surface Placement: Flat and dry surfaces
  • Cleaning: Hand wash exterior/hard plastic/non-electronic parts with water only

Product Usage Instructions

• Safety Instructions
  • Before using the Air Purifier HP300 Series, it is crucial to follow these safety guidelines:
  • Ensure the power cord is not damaged and the plug fits securely in a polarized outlet.
  • Avoid running the cord under carpeting or covering it with rugs. Keep the cord away from high-traffic areas.
  • Do not operate the appliance if the airflow is restricted or if it has been damaged.
  • Always unplug the unit before cleaning or performing maintenance.
  • Supervise children around the appliance to prevent misuse.
• Operating Instructions
  • Place the air purifier on a flat and dry surface.
  • Ensure the power cord is not damaged and plug it into a polarized outlet.
  • Turn off all controls before plugging in or unplugging the appliance.
  • Do not use the appliance without the filter in place.
  • Avoid using the air purifier in wet areas, outdoor spaces, or near flammable substances.
• Maintenance Instructions
  • Hand wash exterior/hard plastic/non-electronic parts with water only. Do not immerse in water or use chemicals for cleaning.
  • Regularly check and clean the filter to maintain optimal performance.
  • If the appliance is not working correctly, contact the manufacturer or authorized service facility for repair.

FAQs

• Q: Can I use the air purifier outdoors?
  • A: No, the air purifier should only be used for household purposes on flat and dry surfaces. Avoid outdoor use.
• Q: How often should I clean the filter?
  • A: It is recommended to check and clean the filter regularly based on usage, typically every 3-6 months for optimal performance.

IMPORTANT SAFETY INSTRUCTIONS

HOUSEHOLD USE ONLY

WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

GENERAL WARNINGS

1. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. Unplug or disconnect the appliance from the power supply before servicing.

2. DO NOT operate any unit with a damaged cord or plug. Discard the unit or return it to an authorized service facility for examination and/or repair.

3. DO NOT run the cord under the carpeting. DO NOT cover the cord with throw rugs, runners, or similar coverings. DO NOT route the cord under furniture or appliances. Keep the cord away from high-traffic areas where it will not be tripped over.

4. If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.

5. This appliance should only be placed on flat and dry surfaces.

6. This appliance is not intended for use by anyone (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

7. Children should be supervised to ensure that they DO NOT play with the appliance.

8. Cleaning and user maintenance shall not be done by children without supervision.

9. Before cleaning or other maintenance, the appliance must be unplugged from the electrical outlet.

10. DO NOT handle the plug or appliance with wet hands.

11. DO NOT use without a filter in place.

12. Only use Shark® branded filters and accessories.

13. DO NOT damage the power cord:

    • a) DO NOT pull or carry the appliance by the cord or use the cord as a handle.
    • b) DO NOT unplug by pulling on the cord. Grasp the plug, not the cord.
    • c) DO NOT stand the appliance on the power cord, close a door on the cord, pull the cord around sharp corners, or leave the cord near heated surfaces.

14. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.

15. DO NOT use if airflow is restricted. If the air paths become blocked, turn the appliance off and unplug from the electrical outlet. Remove all obstructions before you plug in and turn on the unit again.

16. DO NOT use if the appliance is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water.

17. DO NOT place appliances on unstable surfaces such as chairs or tables.

18. DO NOT use in the following areas:

    • a) Wet surfaces
    • b) Outdoor areas
    • c) Spaces that are enclosed and may contain explosive or toxic fumes or vapours (lighter fluid, gasoline, kerosene, paint, paint thinners, mothproofing substances, or flammable dust)

19. Turn off all controls before plugging in or unplugging the appliance.

20. Unplug from electrical outlet when not in use and before any maintenance or cleaning.

21. Hand wash exterior/hard plastic/non-electronic parts with water only. Do not immerse. Cleaning with chemicals could damage the unit.

22. Make sure the filter is in place after routine maintenance.

23. Not suitable for use with solid-state speed controls.
    ODOR NEUTRALIZER TECHNOLOGY

24. Observe the following when interacting with the odour-neutralizer technology cartridge.

    • a) DO NOT attempt to disassemble the odour neutralizer technology cartridge.

    • b) Avoid direct contact with the fragrance pod in the cartridge.

    • c) DO NOT directly inhale from the odour neutralizer technology cartridge.

    • d) Keep away from children and pets.

    • e) Keep away from heat, sparks, and open flame.

    • f) DO NOT place in direct sunlight.

    • g) Avoid contact with fabrics and finished surfaces.
      FRAGRANCE CARTRIDGE FIRST AID

    • a) Eye contact: Remove contact lenses if present. Rinse continuously with water for several minutes

    • b) Skin contact: Wash hands thoroughly after handling. If irritation or rash develops, seek medical advice/attention.

    • c) Inhalation: Move the person to fresh air if they are experiencing any respiratory symptoms. If symptoms persist, seek medical advice/attention.

    • d) Ingestion: DO NOT induce vomiting. Seek medical advice/attention.

25. Dispose of batteries properly. Keep batteries away from children at all times. Even used batteries can cause injury.

    • WARNING: Chemical Burn Hazard. Keep batteries away from children.
    • This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours.
    • When not changing batteries, keep the battery compartment completely closed.
    • If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.
    • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

SAVE THESE INSTRUCTIONS

SETTING UP YOUR AIR PURIFIER
Parts:

1. Air Output Vents
2. Odour Neutralizer Technology Dial
3. Control Panel
4. Front Display
5. Air Purifier Body
6. Air Intake Vents
7. Mesh Dust Filter
8. HEPA Filter
9. HEPA Filter Door

TIPS FOR SETTING UP YOUR AIR PURIFIER

• Make sure the front panel of the air purifier faces away from the closest wall.
• Do not move the unit while it is running. Turn off the power and unplug the air purifier before moving it.
• Make sure the air intake vents are not blocked.
• Do not place anything on the air purifier.
• Do not place the air purifier near heaters or radiators.
• Keep the air purifier out of direct sunlight and away from water or other liquid.
• Keep all nearby doors and windows closed when operating the air purifier.
• Avoid using it in very humid environments.

Note: The Odor Neutralizer Technology is not included on all Shark HP300 series products.

1. DO NOT plug in the air purifier. First, carefully turn the air purifier upside down and place it on a level floor surface. Rotate the filter door countercounterclockwise to unlock it, then lift it off to access the HEPA filter.
2. Take the HEPA filter out of its plastic packaging. Reinstall the HEPA filter in either orientation.
3. With the HEPA filter reinstalled, twist the filter door clockwise until it clicks into place.
4. Set up the air purifier on a flat, level, floor surface, at least 3 inches (8 cm) away from walls and objects. If Odor Neutralizer Technology is included with your air purifier, find the odor cartridge and follow the instructions to install it.
5. Carefully remove the yellow sticker on the top of the air purifier to access the control panel. Plug the air purifier into an electrical outlet and press the power button on the top control panel.
6. When the air purifier power is on, the air purifier will begin to analyze the air quality, indicated by the rotating lights. After a few seconds, the air purifier will display the current air quality.

Note: NeverChange HEPA Filter Technology™ allows up to 5 years* of use out of a single HEPA filter. Tested to GB/T18801-2015 P.CCM, based on 50% CADR declined, 300 sq. ft. cleaning area and 12 hours daily operation on MAX fan speed.

CONTROL PANEL

There is a control panel on the top of the air purifier and a display screen on the front.

TOP CONTROL PANEL

FRONT DISPLAY SCREEN

Displays the current air quality status based on the Air Info mode selected on the top control panel.

TOP CONTROL PANEL BUTTONS

• On/Off: Press to turn the power on or off.
• Auto Mode: Press to turn on Auto Mode. In this setting, the fan speed automatically adjusts based on real-time air quality readings. As the air quality improves, the fan speed will decrease. If air quality worsens, the fan speed will increase. Leave your unit in Auto Mode for optimal filter life and performance.
• Fan Speed: Adjusts the speed of the fan. Select one of 5 settings: 1 Quiet, 2 Low, 3 Medium, 4 High, 5 Maximum. Note: If fan speed is manually changed, Auto Mode will be deactivated. For tips and more information, see the Optimizing Fan Speed section.
• Air Info: Press to switch between air quality display options. See the Air Info Settings section for more information.
• Shut-Off Timer: Set the number of hours for the air purifier to run before it automatically shuts off. The timer can be set from 1 to 12 hours.
• Brightness: Adjusts the brightness of both the front display screen and the top control panel. Switch between 3 options: full brightness, partially dim, and fully dim. In fully dim mode, the air purifier will continue to run with the LED light off—perfect for nighttime.
• Shut-Off Timer: Set the number of hours for the air purifier to run before it automatically shuts off. The timer can be set from 1 to 12 hours.
• Dust Filter Life: Press to show the remaining life of the mesh dust filter, before additional maintenance is required. When Dust Filter Life reaches 0%, the filter icon will flash to indicate the mesh dust filters need to be checked for debris buildup. See the Mesh Dust Filter Maintenance section for more information.
• Child Lock: Press and hold for two seconds to lock the top control panel buttons. To unlock, Press and hold for two seconds again.

Tips and Tricks:

• Optimize Performance in Eco Mode: After 100% clean air status is achieved for 5 minutes in Auto Mode, your air purifier will enter Eco Mode. Your unit’s filter life will be optimized.
• Turn Off Beeping: To turn off notification sounds, press and hold the Air Info and Child Lock buttons at the same time for two seconds. To resume, press and hold both buttons again.

AIR INFO SETTINGS

The built-in sensor detects your air quality to give you real-time information. Use the AIR INFO button to switch between air quality display options.

UNDERSTANDING YOUR AIR QUALITY

The rings on the front display will change colour as your air quality changes, allowing you to easily monitor your air quality even when the air purifier is across the room.

Note: The air quality sensor uses a cumulative particle count across all particle sizes to determine the percentage of clean air.

OPTIMIZING FAN SPEED

Your air purifier is equipped with 5 fan speed settings. Adjust fan speed to optimize your cleaning performance.

TROUBLESHOOTING

TROUBLESHOOTING AND FREQUENTLY ASKED QUESTIONS

Product| What are the recommended settings?| We recommend using this air purifier in Auto Mode. Auto Mode leverages your air purifier’s particle sensor, and this adjusts the fan speed automatically. Higher fan speeds work best for reducing odours and capturing debris most effectively.
---|---|---
Where should I set up my air purifier?| We recommend setting up the air purifier in the room of your home where there is the most activity. This will help to clear the air of pollutants and odours as they are introduced.
What is ECO mode?| After 100% clean air is achieved for 5 minutes in Auto Mode, your air purifier will enter Eco Mode. The fan will turn off until a significant number of particles are detected, optimizing your HEPA filter’s life.
Can I mute the air purifier, so it doesn’t beep when pressing the buttons?| To turn off notification sounds, press and hold the Air Info and Child Lock buttons at the same time for two seconds. To reactivate sounds, press and hold both buttons for 2 seconds again.
Why are the top control panel buttons not working?| Your air purifier may have the child lock setting activated. Press and hold the Child Lock button for two seconds to turn this setting on or off.
Air Quality| Why is my air quality always at 100%?| If your air purifier displays a blue ring, your air quality is good. However, air quality will fluctuate as you introduce pollutants into your home. Activities like smoking, cooking, dusting, or spraying cleaning products (among other things) can add pollutants to your air. Our Clean Sense IQ™ technology tracks this fluctuation in real-time and adjusts as it detects particles. To determine if the sensor is working correctly, spray perfume or aerosol cleaning product near the sensor on the back of the air purifier. Please visit: sharkclean.com/support for more information.
Why is my air quality never at 100%?| If your air quality never reaches 100%, make sure that the HEPA filter is properly installed and that its original plastic packaging has been removed. Activities like smoking, burning candles, running a humidifier, opening windows, and cooking (among other things) can add more pollutants to your air. Make sure to survey your environment and remove anything that could be causing low air quality.
Mesh Dust Filter| What are these filters on either side of the air purifier for?| These easy-to-clean mesh dust filters on either side of the air purifier capture large debris like hair, dust, and lint to protect the 3-layer HEPA filter. Maintenance is required on these mesh dust filters when indicated on the front display. Refer to the Mesh Dust Filter Maintenance section for more information.
How do I know when to clean these 2 filters?| When it’s time to check your dust filters for maintenance, the front display will show a pulsing red ring along with the text “check dust filters.” Refer to the Mesh Dust Filter Maintenance section for more information.
HEPA Filter| Can I wash my HEPA filter?| No, the HEPA filter is not washable. Keep the filter away from water and dispose of it when it is dirty.

MESH DUST FILTER MAINTENANCE

• Checking the Mesh Dust Filters:
  • When it’s time to check your dust filters for maintenance, the front display will show the following screen with a pulsing red ring:
• Cleaning the Mesh Dust Filters:
  • For best results, check both dust filters for debris when prompted on the front display.

If maintenance is required, be sure to KEEP THE AIR PURIFIER PLUGGED IN and running, and complete the following steps:

1. Gently slide up the filters to remove them. Check the screens for dust and debris buildup.
2. Use a vacuum cleaner on low speed with a soft brush attachment OR a cloth/towel to remove debris from the mesh screen. DO NOT use abrasive chemical cleaners.
3. If additional cleaning is required, rinse the mesh dust filters with room-temperature tap water. Be sure to completely dry the screen for 12 hours before re-installing. DO NOT USE the air purifier when mesh filers are wet to prevent damaging the HEPA filter.
4. Gently reinsert the mesh dust filters into the slots on the sides of the air purifier. Be sure to push each dust filter into place until it is flush with the air purifier body
5. Once both mesh dust filters have been cleaned and reinstalled, the air purifier will recalibrate and begin to analyze air quality, as indicated by the rotating lights.
   • Note: To manually re-set the Check Dust Filters indicator, press and hold the filter icon on the top control panel for 1.5 seconds.
   • Note: The NeverChange HEPA Filter Technology™ allows up to 5 years* of use out of a single HEPA filter. Tested to GB/T18801-2015 P.CCM, based on 50% CADR declined, 300 sq. ft. cleaning area and 12 hours daily operation on MAX fan speed.

MAINTAINING YOUR AIR PURIFIER

NOTE: Always unplug the air purifier before doing any cleaning or maintenance.

• Exterior Cleaning: For best results, clean the exterior every two months or as needed. Use a microfiber cloth to remove dust. To clean, wipe down the exterior with a microfiber cloth dampened with warm, soapy water. Avoid excess water and abrasive chemical cleaners to prevent damage.
• Interior Cleaning: For best results, clean the interior of the air purifier every two months or as needed. Remove the filter door, take out the HEPA filter, and use a vacuum cleaner or a microfiber cloth to remove dust and debris from the interior. DO NOT use abrasive chemical cleaners or water on the inside of the air purifier.

ODOR NEUTRALIZER TECHNOLOGY

NOTE: The Odor Neutralizer Technology is not included on all Shark HP300 series products.

1. Remove the odour cartridge assembly from the cardboard box and aluminium bag.
2. Flip up the handle on the odour dial, align the arrows, and then insert the assembly into the air purifier.
3. To lock and engage the odour cartridge assembly, rotate it counterclockwise until it clicks at least once. Continue to rotate the dial toward the high position to increase the intensity.

SETTINGS

Settings: There are three intensity settings offered for the Odor Neutralizer Technology in addition to the Off position.

Note: The fan speed on the air purifier is another way to control the intensity of the Odor Neutralizer Technology. Refer to the Optimizing Fan Speed section for more information.

• LOW Rotate the dial to the Low position to decrease intensity to the lowest level when in use.
• HIGH Rotate the dial to the High position to decrease intensity to the highest level when in use.

TIPS

• Odor Cartridge Removal
  • Remove the odour cartridge from the dial if you don’t want the benefits of the odor-neutralization technology.
  • To remove the cartridge, flip up the handle and rotate the odour dial clockwise until the two arrows are aligned. Pull the handle to remove the dial and access the cartridge.
• Maintenance Required
  • Replace the cartridge as recommended under Odor Cartridge Replacement.
  • Visit qr.sharkclean.com/odortech to learn more and purchase replacements.
• Fragrance Strength Over Time
  • The intensity of the Odor Neutralizer Technology’s fragrance may diminish over time. It may also have no noticeable fragrance at all.
  • This is natural and does not indicate that the technology is not working. Follow replacement instructions to ensure continued performance.

ODOR NEUTRALIZER TECHNOLOGY REPLACEMENT

NOTE: The Odor Neutralizer Technology is not included on all Shark HP300 series products.

1. Flip up the handle and rotate the dial counterclockwise until the two arrows are aligned. Pull the handle to remove the dieal from the air purifier.
2. Rotate the cartridge counterclockwise in the dial housing and pull out the cartridge to remove it.
3. Remove the new odour cartridge from the sealed packaging. To maintain the life of the cartridge, keep it in the sealed packaging until you are ready to install it.
4. Align the yellow arrow on the side of the cartridge with the yellow arrow on the side of the dial cover, then insert the cartridge into the dial. Rotate the cartridge clockwise to lock it in place.
5. Align the arrow on the dial cover with the arrow on the air purifier, then reinsert the dial into the air purifier. Rotate the dial counterclockwise until it clicks into an intensity setting to engage. Rotate further to change the intensity setting.
6. Dispose of the old cartridge by dropping it into the trash.
   • Note: Odor cartridges should be replaced every 3 months or as needed for optimal Odor Neutralizer Technology performance.

AVAILABLE ACCESSORIES

ORDER ADDITIONAL ACCESSORIES AND REPLACEMENT FILTERS

Additional accessories and replacement filters are available on sharkaccessories.com.

• Odor Neutralizer Technology Cartridges (2)
  • Two replacement cartridges that guard against bad odours for a fresher-smelling home.
  • We recommend replacing cartridges every 3 months or as needed in your air purifier.
  • The odor Neutralizer Technology intensity dial is sold separately.
• Remote Control
  • Use the remote control to operate your air purifier from a distance.

REMOTE CONTROL BUTTONS

1. On/Off: Turn the air purifier on/off.
2. Air Info: Switch between air quality display options.
3. Auto: Enables Auto Mode.
4. Brightness: Adjusts brightness.
5. Fan Speed: Adjusts the fan speed.
6. Shut-Off Timer: Sets shut-off timer.

WARRANTY

TWO (2) YEAR LIMITED WARRANTY

The Two (2) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and the original product only and is not transferable. SharkNinja warrants that the unit shall be free from defects in material and workmanship for two (2) years from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:
What is covered by this warranty?

1. The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced up to two (2) years from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?

1. Normal wear and tear of wearable parts (such as filters and batteries, etc.), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are available for purchase at sharkaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes.
3. Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance (e.g., not replacing the filters), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the repair is performed by a repair person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.

How to get service

• If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit sharkclean.com/support for product care and maintenance self-help.
• Our Customer Service Specialists are also available at 1-855-523-4061 to assist with product support and warranty service options, including the possibility of upgrading to our VIP warranty service options for select product categories.
• So we may better assist you, please register your product online at registeryourshark.com and have the product on hand when you call.
• SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement.
• A fee of $25.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.

How to initiate a warranty claim

• You must call 1-855-523-4061 to initiate a warranty claim.
• You will need the receipt as proof of purchase.
• We also ask that you register your product online at registeryourshark.com and have the product on hand when you call, so we may better assist you.
• A Customer Service Specialist will provide you with return and packing instruction information.

How state law applies

• This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

IMPORTANT INFORMATION

• REGISTER YOUR PURCHASE
  • registeryourshark.com.
  • Scan the QR code using a mobile device
• RECORD THIS INFORMATION
  • Model Number:
  • Serial Number:
  • Date of Purchase:  (Keep receipt)
  • Store of Purchase:

TECHNICAL SPECIFICATIONS

• Voltage: 120V 60Hz
• Watts: 54W

Benefits of registering your product and creating an account:

• Get easier, faster product support and access to warranty information
• Access troubleshooting and product care instructions
• Be among the first to know about exclusive product promotions
  • TIP: You can find the model and serial numbers on the QR code label at the bottom of the unit.

BATTERY REMOVAL AND DISPOSAL

• This product’s remote control uses a lithium button battery. When the battery no longer has a charge, it should be removed from the remote and recycled. DO NOT incinerate or compost the battery.
• When your lithium battery needs to be replaced, dispose of it or recycle it under local ordinances or regulations.
• In some areas, it is illegal to place spent lithium batteries in the trash or a municipal solid waste stream.
• Return spent batteries to an authorized recycling centre or a retailer for recycling. Contact your local recycling centre for information on where to drop off the spent battery.

FCC

FCC WARNINGS

Note: This unit has been tested and found to comply with FCC limits for Class B digital devices. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This unit generates, uses, and can radiate radio frequency energy, and if not installed and used by the instructions, may cause harmful interference to radio communications. This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

To see if this unit interferes with radio or television reception, try turning it off and on.

To correct any interference:

• Reorient or relocate the receiving antenna.
• Increase the distance between the unit and the receiver.
• Connect the unit to a different outlet than the receiver.
• Consult the dealer or an experienced technician for help.

Caution: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate it.

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

This Owner’s Guide is designed to help you get a complete understanding of your new Shark® Air Purifier.

• SharkNinja Operating LLC
• US: Needham, MA 02494
• CAN: Ville St-Laurent, QC H4S 1A7
• 1-800-798-7398
• sharkclean.com.
• Illustrations may differ from actual products. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice.
• For SharkNinja U.S. Patent information, visit sharkninja.com/patents.

© 2023 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC. CLEAN SENSE IQ and SHARK NANOSEAL are trademarks of SharkNinja Operating LLC. @sharkhome

References

• Processing QR Code
• Find Shark® Clean Parts & Accessories - Shark®

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>