PCI Private Limited TP2 Telematics Platform User Manual

PCI Private Limited TP2 Telematics Platform

Product Information

Specifications

• Characteristics:
  • Operating Temperature: Conditions
  • Operating Voltage: 12V and 24V
  • Operating Current: 500mA max @ 12V, 250mA max @ 24V, 0.6mA max @ 12V (Sleep current)
  • IP Rating: IP67

Frequently Asked Questions

• Q: Are there any user-serviceable parts in the TP2 system?
  • A: The TP2 system does not have any user-serviceable parts. It contains a permanent lithium coin cell for the real-time clock and an internal rechargeable lithium-polymer battery for backup.
• Q: What are the FCC guidelines for operation?
  • A: The FCC guidelines include compliance with Part 15 rules, avoiding harmful interference, and maintaining a minimum distance of 20cm between the radiator and the body for mobile device usage.
• Q: How should I handle the recycling or disposal of TP2 components?
  • A: Proper recycling or disposal per local law is required for all components of the TP2. Ensure compliance with environmental regulations when disposing of the system.

Component Overview

Telematics Platform 2 (TP2) Characteristics

-20° C to 60° C (operating on internal battery)

Operating Voltage| 12 or 24 Volts DC
Operating Current| 500mA max @ 12V
 | 250mA max @ 24V
Sleep current| 0.6mA max @ 12V
IP Rating| IP 67

Connector Pinouts

12-pin Main Connector DT13-12PA

4-pin Ethernet connector 43-01229

Warning

• The TP2 system has no user-serviceable parts. The TP2 contains a permanent lithium coin cell for maintaining the real time clock, and a 1000mAh internal rechargeable lithium-polymer battery as a backup supply to the unit; proper recycling or disposal per local law is required for all components of the TP2.
• The internal battery was designed to provide power to the TP2 during theft. The internal battery is in a non-operational mode and does not discharge as long as the external power to the unit is valid. The internal battery keeps the device alive to send relevant information like location through the cellular network during a theft scenario when the external power to the device is cut. Caution must be taken when the battery discharges at 70°C due to the risk of the battery swelling.

FCC STATEMENT

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
• This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.

FOR MOBILE DEVICE USAGE ( >20cm/low power)

Radiation Exposure Statement:

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
• This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Note

• The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must be fixed to US operation channels only.

IC Compliance Statement

This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Caution

1. the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
2. where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the E.I.R.P. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated.

Radiation Exposure Statement:

• This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.
• This equipment must be installed and operated with greater than 28cm between the radiator & your body.

CE Compliance Statement

This device complies with Directive 2014/53/EU issued by the Commission of the European Community.
A minimum separation distance of 28 cm must be maintained between the user’s body and the device, including the antenna during body-worn operation to comply with the RF exposure requirements in Europe.

• Frequency bands and Powers
  • Frequency band(s) in which the radio equipment operates:
  • Cellular:****
    GSM/GPRS/EDGE| WCDMA| LTE-FDD| LTE-TDD
    ---|---|---|---
    850MHz| Bd.1 (2100MHz)| Bd.1 (2100MHz)| Bd.38 (2600MHz)
    900MHz| Bd.2 (1900MHz)| Bd.2 (1900MHz)| Bd.40 (2300MHz)
    1800MHz| Bd.3 (1800MHz)| Bd.3 (1800MHz)| Bd.41 (2500MHz)
    1900MHz| Bd.4 (2100MHz)| Bd.4 (2100MHz)|
     | Bd.5 (850MHz)| Bd.5 (850MHz)
    Bd.6 (850MHz)| Bd.7 (2600MHz)
    Bd.8 (900MHz)| Bd.8 (900MHz)
    Bd.19 (850MHz)| Bd.12 (700MHz)
     |  | Bd.13 (700MHz)^{1}
    Bd.18 (850MHz)
    Bd.19 (850MHz)
    Bd.20 (800MHz)
    Bd.26 (850MHz)
    Bd.28 (700MHz)
    Bd.66(2100MHz)
  • Wifi:**
    Features| Description**
    ---|---
    WLAN Standard| IEEE802.11 a/b/g/n/ac
    WLAN VID/PID| N/A
    WLAN SVID/SPID| N/A

    ---

Frequency Rage

| 2.4 GHz ISM Bands 2.412-2.472 GHz

5.15-5.25 GHz (FCC UNII-low band) for US/Canada and Europe 5.25-5.35 GHz (FCC UNII-middle band) for US/Canada and Europe 5.47-5.725 GHz for Europe

5.725-5.825 GHz (FCC UNII-high band) for US/Canada

Modulation| 802.11a/g/n/ac: OFDM

802.11b: CCK(11, 5.5Mbps), DQPSK(2Mbps), BPSK(1Mbps)

Number of Channels

| 802.11b:

USA, Canada and Taiwan – 1 ~ 11 Most European Countries – 1 ~ 13 802.11g:

USA and Canada – 1 ~ 11

Most European Countries – 1 ~ 13

802.11n:

USA and Canada – 1 ~ 11

Most European Countries – 1 ~ 13

802.11a:

USA – 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120,

124, 128, 132, 136, 140, 149, 153, 157, 161, 165

• Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates:
  Cellular: ****

Output power (according to release 99)

| Class 4 (+32.5dBm ±1dB) for GSM850 Class 4 (+33dBm ±2dB) for GSM900 Class 1 (+30dBm ±2dB) for GSM1800 Class 1 (+29.35dBm ±1dB) for GSM1900

Class E2 (+27dBm ± 3dB) for GSM 850 8-PSK Class E2 (+27dBm ± 3dB) for GSM 900 8-PSK Class E2 (+26dBm +3 /-4dB) for GSM 1800 8-PSK

Class E2 (+26dBm +3 /-4dB) for GSM 1900 8-PSK

---|---

Output power (according to Release 99)

| Class 3 (+24dBm +1/-3dB) for UMTS 850, WCDMA FDD BdXIX Class 3 (+24dBm +1/-3dB) for UMTS 850, WCDMA FDD BdVI Class 3 (+24dBm +1/-3dB) for UMTS 850, WCDMA FDD BdV Class 3 (+24dBm +1/-3dB) for UMTS 900, WCDMA FDD BdVIII Class 3 (+24dBm +1/-3dB) for UMTS 1700, WCDMA FDD BdIII Class 3 (+24dBm +1/-3dB) for UMTS 1900, WCDMA FDD BdII Class 3 (+24dBm +1/-3dB) for UMTS 2100, WCDMA FDD BdIV

Class 3 (+24dBm +1/-3dB) for UMTS 2100, WCDMA FDD BdI

Output power (according to Release 8)

| Class 3 (+23dBm ±2dB) for LTE 600, LTE FDD Bd71

Class 3 (+23dBm ±2dB) for LTE 700, LTE FDD Bd12

Class 3 (+23dBm ±2dB) for LTE 700, LTE FDD Bd13 Class 3 (+23dBm ±2dB) for LTE 700, LTE FDD Bd14 Class 3 (+23dBm+2/-2.5dB) for LTE 700, LTE FDD Bd28 Class 3 (+23dBm ±2dB) for LTE 850, LTE FDD Bd26 Class 3 (+23dBm ±2dB) for LTE 850, LTE FDD Bd18 Class 3 (+23dBm ±2dB) for LTE 850, LTE FDD Bd19 Class 3 (+23dBm ±2dB) for LTE 800, LTE FDD Bd20 Class 3 (+23dBm ±2dB) for LTE 850, LTE FDD Bd5

Class 3 (+23dBm ±2dB) for LTE 900, LTE FDD Bd8 Class 3 (+23dBm ±2dB) for LTE 1800, LTE FDD Bd3 Class 3 (+23dBm ±2dB) for LTE 1900, LTE FDD Bd2 Class 3 (+23dBm ±2dB) for LTE 1900, LTE FDD Bd25 Class 3 (+23dBm ±2dB) for LTE 2100, LTE FDD Bd1 Class 3 (+23dBm ±2dB) for LTE 2100, LTE FDD Bd4 Class 3 (+23dBm ±2dB) for LTE 2100, LTE FDD Bd66 Class 3 (+23dBm ±2dB) for LTE 2600, LTE FDD Bd7 Class 3 (+23dBm ±2dB) for LTE 2300, LTE TDD Bd40 Class 3 (+23dBm ±2dB) for LTE 2500, LTE TDD Bd41

Class 3 (+23dBm ±2dB) for LTE 2600, LTE TDD Bd38

Wifi:

WLAN 5GHz:

• Operations in the 5.15-5.35GHz band are restricted to indoor usage for all countries.

For single module:

• In all cases assessment of the final product must be mass against the Essential requirements of the Directive 2014/53/EU Articles 3.1(a) and (b), safety and EMC respectively, as well as any relevant Article 3.2 requirements.

Operation

Mode

| Frequency Band

(MHz)

| Antenna Gain

(dBi)

---|---|---
Bluetooth| 2402-2480| 2.96
WLAN 2.4 GHz| 2412-2462| 2.96
WLAN 5 GHz| 5180-5825| 4.53
GSM850| 824.2-848.8| 0.15
GSM1900| 1850.2-1909.8| 2.61
WCDMA II| 1852.4-1907.6| 2.61
WCDMA IV| 1712.4-1752.6| 2.75
WCDMA V| 826.4-846.6| 0.15
LTE Band 2| 1850.7-1909.3| 2.6
LTE Band 4| 1710.7-1754.3| 2.78
LTE Band 5| 824.7-848.3| 0.15
LTE Band 7| 2510-2560| 1.96
LTE Band 12| 699.7-715.3| -1.54
LTE Band 13| 779.5-784.5| 0.19
LTE Band 26| 814.7-823.3| 0.22
LTE Band 38| 2572.5-2617.5| 1.75
LTE Band 41| 2498.5-2687.5| 1.96
LTE Band 66| 1710.7-1779.3| 2.78

Installation Planning

Safety, Reliability, and Accessibility

• Use eye protection when using a drill/performing work that may be hazardous to the eyes.
• Use ear protection in noisy work areas.
• Wear appropriate clothing/uniforms and safety shoes.
• Maintain three points of contact when climbing in and out of cab.
• Make sure you know what is behind the area before you drill.
• Install equipment so it will not cause damage to the vehicle or work loose over time.
• Make sure there are no loose components/cables and no unsecured components.
• Use solid mounting surfaces.
• Route all cables away from hot or abrasive areas.
• Choose installation locations where components can be easily serviced.
• Choose installation locations where components are safe from tampering and damage

IMPORTANT SAFETY INFORMATION

WARNING

Do not locate the product where it obstructs the driver’s field of vision, distracts the driver from the driving task, interferes with the driver’s operation of controls or displays, or creates a safety hazard. Follow all laws and regulations governing the placement of equipment and mounts.

DO locate the product where:

• it can be safely installed on a secured bracket that is robust enough to minimize any vibration and sustain the weight of the product.
• the mounting surface is strong enough to support the mounting hardware.
• the mounting surface is flat.
• it does not block the view of the road or mirrors.
• the surrounding area is clear of dash controls and gauges.
• it does not limit a passenger’s leg room or block access to any other compartments.
• it does not interfere with anyone entering or exiting the vehicle cab.
• it is not likely to impact the driver or passenger in case of an accident or collision.

MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

DO NOT locate the Product where it:

• obstructs the driver’s field of vision.
• distracts the driver from the driving task.
• interferes with the driver’s operation of controls or shifting.
• obstructs moving parts of the vehicle, if any.
• blocks the deployment of an airbag.

Additional information for selecting an installation location:

• Installations should not obstruct the driver’s field of vision while operating the vehicle, and should comply with all applicable federal and state laws and regulations regarding
• appropriate installation locations (including restrictions against the mounting of objects on a vehicle’s windshield) and driver distraction.
• Consider the owner’s preference in selecting the installation location and whether there is a team or a single driver.
• Once a suitable location is selected, verify that there is nothing behind the mounting surface that might be damaged by drilling holes.
• The product shall be installed at a location where the radiating antenna can be kept 20 cm from nearby person in normal operation condition to meet regulatory RF exposure requirement.
• This EUT is strictly for installation by vehicle manufacturers / professional installers who will install the device in a location that is compliant with the user manual instructions, such that mobile RF exposure conditions can be maintained under all situations.

WARNING

• Excess cable can be a tripping hazard. Ensure cable is not draped where it will interfere with either the driver or passenger as they move within the cab.

Mounting Options

Mounting Screw Locations

• There are a total of 4 mounting screw holes, one at each corner, as pointed to by the red arrows below. Two of the holes are slightly elongated for tolerance purposes.
• Fastening screws (M5 bolts) and washer are provided.
• Units are in millimeters.

PCI Private Limited

• 35 Pioneer Road North Singapore 628475

Copyright © 2023 PCI Private Limited. All rights reserved.
PCI Private Limited is a trademark of PCI Private Limited. All other trademarks are the property of their respective owners.
PCI Private Limited endeavors to ensure that the information in this document is correct and fairly stated, but PCI Private Limited is not liable for any errors or omissions. Published information may not be up to date, and it is important to confirm current status with PCI Private Limited.

This technical data may be subject to U.S. and international export, re-export or transfer (export) laws.
Diversion contrary to U.S. and international law is strictly prohibited.

October 2023

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>