Kryakyn 4218 Black Universal LED Battery Gauge Instruction Manual
- June 1, 2024
- Kryakyn
Table of Contents
Kryakyn 4218 Black Universal LED Battery Gauge
Product Information
Specifications
- Product Name: Black Universal L.E.D. Battery Gauge
- Color: Black
- Parts Included: Battery Gauge, Installation Instructions
Product Usage Instructions
Tools Required
- Glass Cleaner
- Clean Rag
- Splicing and Insulating Supplies
- Drill and Drill Bits
Installation Steps
Step 1: Preparation
Read and understand all steps in the instructions before starting the
installation. Park the motorcycle on a hard, level surface and turn off the
ignition.
Step 2: Mounting
If you choose to hide the power wire, drill a 3/16 diameter wire access hole
in the center of the mounting location. Clean the mounting area.
Step 3: Gauge Installation
Feed the wire through the access hole, then peel off the adhesive backing and
stick the gauge into position. Ensure the area of installation is free of
grease, oil, dirt, or other debris for proper adhesion.
Step 4: Wiring – Power Lead
Find a power lead that is only on when the ignition key is on.
Attach the red wire from the gauge to this power lead.
Step 5: Wiring – Ground Wire
Find a good circuit ground wire and attach the black wire from the gauge to
the ground wire.
Frequently Asked Questions (FAQ)
Q: What do the different LED indicators on the battery gauge signify?
The yellow LEDs indicate high and low charging levels, while the flashing red
LEDs warn of an impending electrical system failure.
Q: What is the warranty coverage for the Black Universal L.E.D.Battery
Gauge?
The product is warranted for one (1) year from the date of purchase against
defects in materials and workmanship. Proper installation and maintenance are
required for warranty claims.
BLACK UNIVERSAL L.E.D. BATTERY GAUGE
PARTS INCLUDED
- 1 Battery Gauge — Black
- 1 Installation Instructions
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING KϋRYAKYN!
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR PROPERTY DAMAGE
OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL INSTRUCTIONS, WARNINGS, CAUTIONS
AND ATTENTION NOTES REGARDING THE USE AND CARE OF THIS PRODUCT.
ATTENTION! This indication alerts you to the fact that ignoring the contents described herein may negatively affect product performance and functionality.
CAUTION! This indication alerts you to the fact that ignoring the contents described herein can result in potential injury or material damage.
TOOLS SUGGESTED
Glass Cleaner, Clean Rag, Splicing and Insulating Supplies, Drill and Drill
Bits
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
STEP 1 Read and understand all steps in the instructions before starting the installation. Park the motorcycle on a hard, level surface and turn off the ignition.
ATTENTION! A factory service manual may be helpful in performing this
installation. Do not attempt to perform this installation if you are not
confident in your ability to complete all of the steps in the procedure;
consult a
trained technician.
NOTE: This universal battery gauge is designed to indicate the safe charging levels of any 12 volt alternator/battery powered motor vehicle electrical system. The gauge is equipped with 9 LEDs with an automatic “day/night” brightness control. The gauge is calibrated in 1/2 volt increments from 8–16 volts.
- The green LED zone of 12.5–14.5 volts indicates a safe charging range level for the entire electrical circuit the battery gauge is reading.
- The high and low yellow LEDs warn of an over or under charging problem.
- The extreme high and low flashing red LEDs warn of an impending electrical system failure.
STEP 2 After choosing a location, if you choose to hide the power wire, drill a 3/16” diameter wire access hole in the center of the mounting location. Clean the mounting area.
CAUTION! MEASURE TWICE – DRILL ONCE. Double check all reference marks made on the mounting location BEFORE drilling. Kuryakyn will not be responsible for incidental or consequential damages resulting from this installation
STEP 3 Feed the wire through the access hole, then peel off the adhesive backing and stick the gauge into position.
ATTENTION! Ensure the area of installation is free of grease, oil, dirt or other debris to ensure proper adhesion. Küryakyn WILL NOT issue a warranty on any parts lost due to improper installation.
ATTENTION! The adhesive will not bond correctly if applied at temperatures less than 50°F. Do not attempt this installation in temperatures less than 50°F.
STEP 4 Find a power lead. After confirming with a test light that it is only “on” when the ignition key is on, attach the red wire to the power lead.
STEP 5 Find a good circuit ground wire and attach the black wire from the gauge to the ground wire.
STEP 6 Carefully insulate all connections.
ATTENTION! Secure all wiring away from any moving parts, pinch points or extreme heat. Küryakyn WILL NOT issue a warranty on any electrical component that fails due to pinched, crimped, broken, abraded, melted or frayed wires.
CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS
techsupport@kuryakyn.com or call
715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold hereunder, shall be free of defects in materials and workmanship for a period of one (1) year from the date of purchase by the consumer excepting the following provisions:
-
Küryakyn shall have no obligation in the event the customer is unable to provide a receipt showing the date the customer purchased the product(s).
-
The product must be properly installed,maintained and operated under normal conditions.
-
Küryakyn makes nowarranty, expressed or implied, with respect to any gold plated products.
-
Küryakyn shall not be liable for any consequential and incidental damages, including labor and paint, resulting from failure of a Küryakyn product, failure to deliver, delay in delivery, delivery in nonconforming condition, or for any breech of contract or duty between Küryakyn and a customer.
-
Küryakyn products are often intended for use in specific applications. Küryakyn makes no warranty if a Küryakyn product is used in applications other than intended.
-
Küryakyn electrical products are warranted for one (1) year from the date of purchase by the consumer. L.E.D.’S contained in components of Küryakyn products will be warranted for defects in materials and workmanship for 3 years from the date of purchase where as all other components shall be warranted for one(1) year.
This includes, but is not limited to; control modules, wiring, chrome & other components. -
Küryakyn makes nowarranty of any kind in regard to other manufacturer¹s products distributed by Küryakyn. Küryakyn will pass on all warranties made by the manufacturer and where possible, will expedite the claim on behalf of the customer, but ultimately, responsibility for disposition of the warranty claim lies with the manufacturer.
ABOUT OUR CATALOG
For purchasing Küryakyn® products, you can receive a complete catalog free of
charge. Send the Proof9of9Purchase below with your address to: Küryakyn, P.O.
Box 339, Somerset, WI 54025. Please indicate either Accessories Catalog for
Harley9Davidson® or GL & Metric Cruisers.
Be sure to ask your local dealer about other Küryakyn® products, the
motorcycle parts and accessories designed for riders by riders.
©2005 Küryakyn USA® All Rights reserved.
UNIVERSAL L.E.D. BATTERY GAUGE INSTALLATION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>