Netum NT-1228BC Bluetooth Wireless Barcode Scanner User Manual

June 1, 2024
NETUM

Netum NT-1228BC Bluetooth Wireless Barcode Scanner User Manual

Netum-NT-1228BC-Bluetooth-Wireless-Barcode-Scanner-
product

Bluetooth Connection

  1. Pairing with Windows XP or Windows 7/8/10
  2. Power on the scanner, and a few seconds later the blue indicator will keep flashing.
  3. Enter the ‘Control Panel’ – ‘Devices and Printers’ – ‘Add a device’ – select, ‘Bluetooth’ to add the device to your computer
  4. Click ‘Next’, the scanner will beep to indicate a successful pairing, and the light will turn to solid blue.

Android: Connect Android Device in Basic Mode

  1. Power on the scanner. Make sure the scanner is discoverable (unpaired). a few seconds later the blue indicator will keep flashing.
  2. Touch Home | Menu | Settings | Wireless &Networks | Bluetooth settings
  3. Make sure the device has Bluetooth “On”. Scan for devices.
  4. In the list of found devices, select “Netum Bluetooth”. Tap Pair.
  5. The scanner will connect to the Android device.
  6. The scanner will beep once after it has connected and is ready to scan barcodes.Netum-NT-1228BC-Bluetooth-Wireless-Barcode-Scanner-fig-1

Pairing with your device

  1. Power on the scanner. Make sure the scanner is discoverable (unpaired). a few seconds later the blue indicator will keep flashing.
  2. Click on “Bluetooth” in the left column. Your IOS device will automatically start searching for any  Bluetooth Devices in the area.
  3. Once you have identified the “Netum Bluetooth” on the screen, tap on it and you will automatically be connected. The scanner’s LED light will turn to solid blue.Netum-NT-1228BC-Bluetooth-Wireless-Barcode-Scanner-fig-2

Operation mode

BT HID Mode (Default)
No Software installation is needed, connects to most devices with bluetooth or USB interface. In this mode, the scanner interacts with the device like a keyboard. Therefore, the scanner will work with Safari, Notes, and any other applications that support an active cursor.

BT HID Mode
Note: this command barcode is only applied to Bluetooth Wireless Mode

Keyboard Language
To let the scanner correctly upload the codes, you have to set the keyboard language before using it.

For example
If you use a French Keyboard, just scan the barcode of “French Keyboard”, after that scanner will upload barcodes according to the French keyboard layout. American Keyboard is set by default, if you use a US keyboard you can just skip this part.

Download PDF:Netum NT-1228BC Bluetooth Wireless Barcode Scanner User Manual

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals