VEVOR DT-C1105 Rectangle Roll Top Chafing Dish User Manual

June 9, 2024
VEVOR

VEVOR DT-C1105 Rectangle Roll Top Chafing Dish User Manual

We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

This is the original instruction, please read all manual instructions carefully before operating.
VEVOR reserves clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there is any technology or software updates on our product.

IMPORTANT SAFEGUARDS

  1. Children and minors cannot use this product.
  2. Only solid fuel can be used as heating fuel. Do not use gasoline, alcohol,etc.
  3. Please use the ignition torch to ignite the fuel.
  4. When the fuel is burning, special personnel shall be assigned to watch over it to prevent it from being hit or toppled.
  5. Close the metal cover of the container to extinguish the fuel. Do not blow it out.
  6. It is not allowed to add new fuel before the burning fuel is extinguished and cooled.
  7. Remember to clean the food tray and fuel container after each use.
  8. Do not clean with corrosive solvents such as strong acid and alkali

Thank you for using this product. In order to make sure that you can operate the machine correctly, read this instruction carefully before operation and keep it properly for future reference. Please be sureto read the precautions and safety rules listed abovee to ensure your safe use.

PRODUCT COMPONENTS

Product Components

  1. Lid
  2. Food Pan
  3. Water Pan
  4. Frame
  5. Fuel Holder

OPERATING INSTRUCTIONS

Before using the product for the first time, peel off any promotional materials and packaging materials, and check that the food pan and water pan are clean and free of dust. If necessary, wipe them over with a damp cloth. Spread over with an absorbent kitchen towel and wipe off any excess oil.

  1. Take all the components out of the box and unwrap.

  2. Place the frame on a firm surface (see diagram for included\ parts).

  3. Place the fuel holder at the center of the base carefully.

  4. Put the water pan into the frame and fill with water (fill in hot water for faster heating).

  5. Remove the cover from the fuel holder, and ignite the fuel to heat the water (steam from the heated water will keep the food hot).

  6. Place food in the food pan and set this pan into the water pan.
    The food pan will be suspended above the water. Then, place the cover over the food pan.

  7. Replace the cover over the fuel holder to extinguish the burning fuelr—DO NOT BLOW IT OUT.

NOTE:

  1. Always use a scald-proof pad when touching the fuel holder. Fuel, fuel holder and its cover can get extremely hot.
  2. For the best heating efficiency, please keep the lid closed when heating, and check the water level periodically, since the hot water will evaporate into steam.

CLEANING AND MAINTENANCE

  1. The frame and cover may be cleaned with warm, soapy water.
    Never use abrasive materials or scouring pads. Thoroughly wipe off the mild soap instead of immersing the frame into water. If needed, you can polish it with stainless steel cleaner or glass cleaner without ammonia.

  2. Parts that can be cleaned in a commercial dishwasher: Food Pan and Water Pan.

Manufacturer: DONTALEN COMMERCIAL KITCHENWARE
CO.,LTD
Address: New River Road NO.5, Shatou Industrial Zone, Shunde District, Guangdong Province, China

Made in China

EUREP UK LTD
UNIT 2264, 100 OCK STREET, ABINGDON
OXFORDSHIRE ENGLAND OX14 5DH

Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET

EUREP GmbH
Unterlettenweg 1a, 85051
Ingolstadt, Germany

Importer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris

Support and E-Warranty Certificate
https://www.vevor.com/support

NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
CustomerService@vevor.com

VEVOR Logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

VEVOR User Manuals

Related Manuals