i-PRO WV-QSR507 Mount Bracket Installation Guide

i-PRO WV-QSR507 Mount Bracket

Important Instrctions

• Before attempting to connect or install this product, please read these instructions carefully and save this manual for future use.
• The external appearance and other parts shown in this manual may differ from the actual product within the scope that will not interfere with normal use due to improvement of the product.

i-PRO Co., Ltd. assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation or through use of parts other than this product, such as locally procured parts.

“” used in these documents should be used to search for information on our technical information website (https://i-pro.com/global/en/surveillance /training-support/support/technical-information) and will guide  you to the right information.

Caution:

• Before attempting to connect or operate this product, please read these instructions carefully.

Notice:

• This product is not suitable for use in locations where children are likely to be present.
• Do not install this product in locations where ordinary persons can easily reach.
• For information about screws and other parts required for installation, refer to the corresponding section of this document.

Precautions

• Do not hang down from this product or use this product as a pedestal.
  Failure to observe this may cause injury or accidents.

• Do not use this bracket except with suitable cameras.
  Failure to observe this may cause a drop resulting in injury or accidents.

• Refer installation work to the dealer.
  Installation work requires technique and experience.
  Failure to observe this may cause fire, electric shock, injury, or damage to the product.
  Be sure to consult the dealer.

• Take measures of protection against this product falling.
  QSR507F    QSR507M   QSR507F1   QSR507M1
  Failure to observe this may cause a drop resulting in injury or accidents.
  Be sure to install the safety wire.

• The screws and bolts must be tightened to the specified torque.
  Failure to observe this may cause a drop resulting in injury or accidents.

• Install the product accurately and securely on the bracket in accordance with the installation instructions.
  Failure to observe this may cause injury or accidents.

• Do not rub the edges of metal parts with your hand.
  Failure to observe this may cause injury

When using this product, also read the “Precautions” described in the operating instructions for the camera to be attached.

About notations

| Connection part specifications of this product| Mount bracket corresponding with this product
---|---|---
QSR507| 4 holes| | WV-QCL501 WV-QWL501
QSR507F| Female parallel pipe thread (ISO)

40A, Rp 1-1/2, 11crest depth 25.4 mm {1 inch}

| | Locally procured

40A, R 1-1/2, 11crest length 25.4 mm {1 inch} or more (male taper pipe thread)

QSR507F1| Female parallel pipe thread (ANSI)

40A, NPSC 1-1/2, 11.5 crest depth 25.4 mm {1 inch}

| | Locally procured

40A, NPT 1-1/2, 11.5 crest length 25.4 mm {1 inch} or more (male taper pipe thread)

QSR507M| Male taper pipe thread (ISO)

40A, R 1-1/2, 11 crest length 25.4 mm {1 inch}

| | Locally procured

40A, Rp 1-1/2, 11 crest depth 25.4 mm {1 inch} or more (female parallel pipe thread)

QSR507M1| Male taper pipe thread (ANSI)

40A, NPT 1-1/2, 11.5 crest length 25.4 mm {1 inch}

| | Locally procured

40A, NPSC 1-1/2, 11.5 crest depth 25.4 mm {1 inch} or more (female parallel pipe thread)

| i-PRO White
| Black

Preface

This product is a mount bracket for a camera. Use this product when connecting a camera to a ceiling mount bracket, wall mount bracket or a locally procured bracket.

The latest information about the supported cameras>

The model number is abbreviated in some descriptions in this manual.

Specifications

{10-5/8 inches (W) x 4-1/16 inches (H) x 6-11/16 inches (D)}
Mass:| Approx. 850 g {1.88 lbs}
Finish:| Aluminum die cast,

Precautions for installation

• In order to prevent injury, this product must be securely mounted to a bracket according to Installation Guide.

• Mounting method for this product
  This product is designed to be used as a pendant mount camera. If it is mounted on a desktop or at a slant, the camera may not work correctly and its lifetime may be shortened.

• Make sure to remove this product if it will no longer be used.

Standard Accessories

Screw (Spare screw for connect bracket: M4 x 8 mm {5/16 inches})…………………………..1 pc.
Screw (Fixing screw for the attachment plate: M4 x 8 mm {5/16 inches})……………………5 pcs.
(of them, 1 for spare)

Other items that are needed (not included)

Common

• Screws to fix a locally procured bracket on the installation surface.
  **QSR507**

• 5 mm {3/16 inches} (distance between two parallel sides of a hexagon) hex wrench
  QSR507F    QSR507M   QSR507F1   QSR507M1

• Sealant for waterproof treatment

• Safety wire

• Fixing screw for safety wire

 Use a screw having a pull-out strength that is enough to hold the sum of weight of the camera, this bracket, locally procured bracket, wire and cables.

• Select a fixing method in accordance with the installation place surface for a part where the safety wire is to be fixed.
• Use the dedicated tool when processing the wire.
• Maximum weight of locally procured bracket: 5 kg {11 lbs}

Installation

Step 1

• Check of combination of brackets

QSR507

+ WV-QCL501
(Ceiling mount bracket)
+ WV-QWL501
(Wall mount bracket)

Step 2

Hexagon screws (4 pcs.)
(M6: WV-QWL501 accessory)
Recommended tightening torque: 2.45 N·m {1.81 lbf·ft}

• For WV-S85702-F3L/WV-S85402-V2L/WV-U85402-V2L series
  Cables Approx. 510 mm {20-3/32 inches}

• The camera angle when adjusting

• when using in the factory setup position
  ➠ Step 4
  ➠ Step 7

Step 3

• Securely fasten when fixing this product.
  (Due to the thread of the fastening section, this product’s fixing position is not consistent.)
  

• Make sure to waterproof the connection this product and the mount bracket.

Step 4
Hereafter, illustrations are created using WV-QSR507F installation as an example. Also, cables and safety wire may be omitted.

• Do not loosen the fixing scews more than four turns.

Step 5

Depending on the installation location, if it is difficult to adjust the angle of view with the camera front installation setting above, move the camera front (logo direction) to the shooting direction and fix it in place.

Step 6

• Tighten the nut until the bracket is fixed.

Step7

Follow the installation procedure described in the installation guide or in the installation procedure leaflet of the camera for the subsequent procedures.

https://www.i-pro.com/

References

• i-PRO
• i-pro.com/jp/ja/support_portal
• i-pro.com/jp/ja/support_portal/technical_information
• i-PRO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>