Progressive Industries SSP-30X Smart Surge Protector Instruction Manual
- June 1, 2024
- Progressive Industries
Table of Contents
Progressive Industries SSP-30X Smart Surge Protector
Product Usage Instructions
Connection
- Plug the SSP into a standard power outlet.
Device Connection
- Connect your electronic devices to the SSP using the available outlets.
Surge Protection
- The SSP will protect your devices from power surges and spikes.
- Ensure all devices are connected to the SSP for protection.
Reset Function
- In case of a power surge event, the SSP may need to be reset.
- Follow the manufacturer’s guidelines for resetting the SSP.
FAQ
- Q: What is the difference between SSP-30X and SSP-50X?
- A: The main difference lies in their Joule ratings and surge amps. SSP-30X has a Joule rating of 825J and surge amps of 22,500, while SSP-50X may have different specifications.
- Q: Can I plug multiple devices into the SSP?
- A: Yes, you can plug multiple devices into the SSP as long as you do not exceed the total surge amps capacity.
Instructions
SPECIFICATIONS
Model | SSP- 30X | SSP- 50X |
---|---|---|
Rated: | 120V | 120/240V |
Joule Rating: | 825J | 1,650J |
Surge Amps: | 22,500 | 45,000 |
Response Time: | <1 Nano Seconds | <1 Nano Seconds |
FEATURES INCLUDE
- (3) Color LED indicator lights
- Weather resistant
- Dual line polarity tester (SSP-50X only)
- Pull handle on plug
- Limited lifetime warranty
- It’s portable, just plug it in
INSTALL STEPS
STEP 1: Plug Smart Surge Protector into AC power. DO NOT plug in your RV
at this time. Verify GREEN surge indicator LED(s) is on.
STEP 2: Verify which LED’s come on.
- A: The Correct Wiring condition occurs when both the GREEN and BLUE LEDs are on If this does not occur you may be experiencing one of the other three (3) Wiring Conditions as noted in the diagrams:
- B: Reverse Polarity
- C: Open Neutral
- D: Open Ground
Your Smart Surge Protector will continue to work during any of the wiring
conditions; however, only the Correct Wiring condition (both GREEN & BLUE
LED’s on) is optimal and any other wiring condition should be corrected by
Campground Maintenance before use.
STEP 3: Plug in your RV power to the Smart Surge Protector. Refer to STEP
2 above for surge protection wiring conditions.
LED INDICATORS
Note: Green light indicates surge protection is active.
Warning
- RV wiring is different from house wiring. In an RV, neutral and ground conductors are isolated whereas in a house they are bonded at the service panel. Therefore; never connect neutral and ground as this can result in a ground fault condition, electric shock, and/or a fire hazard.
- Do not exceed the electrical rating on the unit for any reason.
- Do not modify the unit in any way as this will void the warranty, could harm you and/or your RV electrical system and electrical equipment or compromise protection.
- When running an extension cord from the RV to the AC power source always use a 6/4 AWG or 6/3 + 8/1 AWG cable for your 240 Volt, 50 Amp device or a 10/3 AWG cable for your 120 Volt, 30 Amp device. Ensure your cable is rated for outdoor use and we recommend the length not to exceed 25’. Taking these preventative measures can help to reduce the risk of electrical shock and/or fire.
- NEVER plug the unit into an inverter. This unit can be used with inverter generators.
- The unit must be used in an upright vertical orientation. The unit should not be placed on the ground or submerged in water.
Maintenance Warning
- Before each use, examine the plug and receptacle of the unit, the male plug of the RV power cord, and the receptacle on the AC power source.
- Look for signs of discoloration which indicates overheating.
- If any connection shows signs of overheating, replace both mating parts immediately.
- Carefully follow the wiring instructions supplied with all replacement devices to ensure proper operation.
- If the unit shows signs of water intrusion or excess moisture, discontinue use immediately.
Progressive Industries, Inc.
- For more information regarding the Limited Lifetime Warranty,
- For troubleshooting and the Warranty Claim Form visit: www.progressiveindustrustries.net.
- Note: Lifetime warranty excludes All Weather Shield assembly.
Technical Support
- 919.267.6964
- Tech@progressiveindustrustries.net.
- ProgressiveIndustries.net.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>