SAMSUNG VS20B95943N Vacuum Cleaner User Manual

SAMSUNG VS20B95943N Vacuum Cleaner

Product Information

Specifications

• Model : VS20B95**** Series
• Power Button : Yes
• Suction Power Control : Yes
• Filters: Washable Micro Filter, Metal Mesh Grille Filter, Fine Dust Filter
• Accessories : Telescopic pipe, Pet Tool+, Combination Tool, Extension Crevice Tool, Charger, Flexible Tool, Dust bags, Accessory Cradle, Jet Dual Brush, Slim LED Brush, Accessory Cradle Holder, Spray Spinning Sweeper / Reusable wet pads, Disposable wet pads / Attachable pad, Battery

Product Usage Instructions

Preparation

Before using the vacuum cleaner, ensure you have all the necessary accessories and parts. These include the telescopic pipe, pet tool+, combination tool, extension crevice tool, charger, flexible tool, dust bags, accessory cradle, jet dual brush, slim LED brush, accessory cradle holder, spray spinning sweeper/reusable wet pads, disposable wet pads/attachable pad, and battery.

Parts Overview

The vacuum cleaner consists of various parts including power button, suction power control buttons, washable micro filter, metal mesh grille filter, display, dustbin release button, fine dust filter, dustbin, adjustable pipe, handle, battery level indicator, battery release button, pipe release button, pipe length adjustment button, brush release button, dustbin joint, clean station start/stop button, dust bag, clean station front cover, clean station premotor filter, clean station fine dust filter, and power cord.

Operation

Follow the user manual instructions for installing and using the clean station. Charging the battery is essential before use. Insert the battery correctly following the guidelines provided. Use the buttons and display to control the vacuum cleaner. Utilize the accessory cradle for storing accessories and use the accessories as needed for cleaning purposes.

Maintenance

Regular maintenance is crucial for optimal performance. Clean the clean station and vacuum cleaner as instructed in the manual. Ensure washable parts are cleaned with an acceptable detergent and avoid prohibited detergents to prevent damage. Refer to the troubleshooting section in case of any issues.

FAQ

• Q: How often should I clean the filters?
  • A: It is recommended to clean the filters at least once a month to maintain efficient suction power.
• Q: Can I use the vacuum cleaner without the dust bags?
  • A: No, always ensure that the dust bags are properly installed before using the vacuum cleaner to prevent debris from entering and damaging the internal components.

Safety information

• Before operating the appliance, please read this manual thoroughly and retain it for your reference.
• Because the following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described in this manual.

Important safety symbols

WARNING

Indicates that a danger of death or serious injury exists.

CAUTION

Indicates that a risk of personal injury or material damage exists.

NOTE

Indicates that the following text contains additional important information.

Safety information

General

For information on Samsung’s environmental commitments and product regulatory obligations, e.g. REACH, visit our sustainability page available via www.samsung.com

Failure to meet these requirements could cause damage to the internal parts of the vacuum and void your warranty.

• Read all instructions carefully. Before plug the station in, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate at the bottom of the station.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or   lack of experience and knowledge if they have been given supervisionor instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should not play with the appliance. Children should not clean or perform maintenance on the vacuum without adult supervision.
• Do not allow the vacuum cleaner to run unattended at any time.
• This product is intended for household use only. (Do not use this product for other than its intended purposes.)
• Do not allow children to ride on or play with the product.
  • An injury or product damage may occur.

Vacuum cleaner

• When assembling the vacuum, be careful not to catch your fingers or hands in the movement fold of the handle.
• Do not use the vacuum cleaner on a wet rug or floor.

Safety information

• Do not use the product at the following places;
  • In a place where a burning candle or a desk lamp is placed on the floor.
  • In a place where heaters are turned on or unextinguished embers exist in an unattended fireplace or an ashtray etc.
  • In a place where there are combustible materials such as oil paint, paint thinner, mothproofing substances, gasoline, alcohol, thinner,  ashtrays with unextinguished cigarettes, etc.
  • In a closed place filled with explosive or toxic vapor.
• Do not pick up the following things. Abnormal operation or product damage may occur.
  • A match or unextinguished ashes or cigarettes
  • Hard or sharp objects
  • Toxic materials (chlorine bleach, ammonia, drain cleaner etc.)
  • Liquid such as water or beverage or pet’s waste
  • Chalk powder
• If there is a gas leak or combustible spray such as a dust remover is used, do not touch the power outlet and open the window for ventilation.
  • An explosion or fire may occur.
• If the product makes a strange sound or emits a smell or smoke, turn off the product immediately, and then contact a Samsung service center.
  • Electric shock or fire may occur.
• When using the vacuum cleaner, be careful not to hurt yourself on the moving or spinning parts.
  • Keep your body parts (Hair, hands, etc.) from the spin brush or the spin disk.
• When cleaning the wall or ceiling, you should use both hands.
  • If you clean with one hand, you can damage your wrist or drop the vacuum and cause an injury or damage the vacuum.
• Do not use the vacuum cleaner on objects that can be easily scratched (monitors, stainless steel appliances, etc.).
• Sometimes the wheel of a brush can scratch the floor. Before using the vacuum cleaner, check the wheels of the brush.
  • If there is foreign matter on the wheel of the brush that cannot be removed easily, contact a Samsung service center.
• When the spin brush inside a brush is working, do not touch the brush.
  • Otherwise, your hand can be caught and it may cause an injury.
• Do not use the vacuum cleaner in direct sunlight or high heat.
• If excessive force is applied to an accessory with a motor or foreign matter is caught in the spin brush (or spin disk), the accessory may stop working to protect the motor or the product. Turn the vacuum cleaner off, remove the foreign matter, and then turn it back on.
• Static electricity may occur depending on the humidity, temperature, or floor material, etc. in your home. If it happens repeatedly, contact a Samsung service center.
• Do not use Pet Tool+ in a small area for a long time and do not let Pet Tool+ keep spinning in one place.
  • Damage may occur if used on sensitive materials
• Do not use the Combination Tool on hard materials such as leather or wood while bristles are not extended.

Maintenance

• While using or after using the vacuum cleaner, you should lay the vacuum cleaner down or place it on the Clean Station to store.
  • The product may fall and an injury and severe product damage occur. In addition, you may not be compensated for the damage.
• Do not store the vacuum cleaner inside a car.
• Before removing foreign matter inside the product, turn off the product first.
  • If the product is on while you are removing the foreign matter, you can hurt yourself or damage the product.
• When cleaning the exterior of the product, turn off the product first and then wipe it with a dry towel. Do not spray water directly onto the product or wipe it with volatile materials such as benzene, thinner, or alcohol.
  • If water gets into the product and an error occurs, turn off the product and contact a Samsung service center.
• When cleaning the washable parts, do not use alkaline detergent, acid, industrial detergent, air freshener, acetic acid, etc.
  • Product damage such as plastic breakage, deformation, discoloration, printing deterioration, etc. may occur.

• Storing the product in sunlight for long hours may cause parts of the product to deform or discolor. Therefore, store the product in the shade.
• After cleaning the dustbin, Metal Mesh Grille Filter, or Washable Micro Filter with water, dry them in the shade.
  • When heat is applied, part deformation may occur.

Clean Station

• Do not pull or carry by the cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners. Keep the cord away from heated surfaces.
• Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
• Do not pull the power cord and do not touch the power plug with wet hands.
  • Electric shock or fire may occur.
• Do not use extension cords or outlets with inadequately rated current.
• If there is dust, water, etc. on a pin or contact point of the power plug pin, wipe them carefully.
  • Abnormal operation or electric shock may occur.
• Do not use a damaged power plug, power cord, or loose power outlet.
  • Electric shock or fire may occur.
• Unplug the Clean Station from the outlet before servicing.
• Do not expose the Clean Station to high temperatures or allow moisture or humidity of any kind to come into contact with the Clean Station.
• Do not plug the Clean Station into a power source with the incorrect voltage. Do not plug the Clean Station into a multi-plug outlet or power strip.
  • Electric shock or fire may occur.
• If the power cord is damaged, have a Samsung-authorized service center replace the power cord with a new power cord.
  • Electric shock or fire may occur.
• Make sure that the charging terminals of the vacuum cleaner and the Clean Station do not come into contact with a conductor such as a bracelet, watch, metal rod, nail, etc.
  • Product malfunction or electric shock may occur.
• As the Clean Station is designed for the use of Samsung Jet cordless vacuum cleaners only, do not use the Clean Station for other electronic appliances and other purposes.
  • Severe damage to the Clean Station or fire may occur.
• Do not allow children to cling to or push the Clean Station.
  • Personal injury, product and floor damage may occur.
• Do not charge the product near a window, heater, toilet, bathroom, etc.
• Do not attempt to open the Clean Station. Repairs should be only carried out by a qualified Samsung service center.
• Injury or product malfunction from incorrect installation of the Clean Station may not be compensated.
• Do not bend the power cord with excessive force or put heavy objects on the power cord.
  • Electric shock or fire may occur.
• Before unplugging or plugging in the Clean Station, turn off the vacuum cleaner and make sure that the pins of the power plug do not come into contact with your hands.
  • Fire or electric shock may occur.

Battery

• Do not mutilate or incinerate batteries as they will explode at high temperatures.
• Do not drop or strike the battery or subject it to a sudden shock.
• Do not disassemble the battery and make sure that you do not create a short circuit across the plus (+) and minus (-) terminals.
• As the battery is manufactured only for this product, do not use the battery for other electronic appliances or other purposes.
• When you purchase a new battery, make sure to check the model name (VCA-SBTA95) and the genuine logo.
  • Contact your nearest Samsung Electronics retailer or Samsung service center to purchase any consumable accessories.
• Leaks from battery cells can occur under extreme usage or temperature conditions. If the liquid gets on your skin, wash the affected area quickly with water. If the liquid gets into your eyes, flush them immediately with clean water for a minimum of 10 minutes. Seek medical attention.
• When attaching the battery to the vacuum cleaner, insert it until you hear a click. This assures that the battery is firmly attached.
  • Otherwise, the battery may fall and could cause product damage or injury.
• If you are not going to use the vacuum cleaner for a long period of time or you are going to be away from home for a long period of time, unplug the Clean Station, and then detach the battery from the vacuum cleaner. When the battery is not being charged and not being used, it will slowly discharge.
• To protect the motor and the battery, the product may not operate when the temperature is lower than 5 °C or higher than 45 °C.
• Dispose of the dead battery in compliance with the local regulations.

Preparation

Accessories

The accessories with the ‘ * ‘ mark may differ depending on the models

Optional

• The Spray Spinning Sweeper includes reusable wet pads and disposable wet pads.

Parts overview

1. Power button
2. Suction power control buttons
3. Washable Micro Filter
4. Metal Mesh Grille Filter
5. Display
6. Dustbin release button
7. Fine Dust Filter
8. Dustbin
9. Adjustable pipe
10. Handle
11. Battery level indicator
12. Battery release button
13. Pipe release button
14. Pipe length adjustment button
15. Brush release button
16. Dustbin joint
17. Clean Station START/STOP button
18. Dust bag
19. Clean Station front cover
20. Clean Station Premotor Filter
21. Clean Station Fine Dust Filter
22. Power cord

NOTE

The wave pattern on the exterior of the product is a natural appearance due to the use of pearl plastic materials and its pearl distribution. In addition, the shining pearl used in the material gives an excellent gloss coating, no extra coating necessary.

For detailed information, please refer to the QR code

Installing the Clean Station

1. Run the power cord of the Clean Station along the round groove at the bottom.
   • Make sure the power cord is correctly placed so that the Clean Station stands without tilting.
2. Before plugging in the Clean Station, arrange the power cord neatly.
3. When plugging in the Clean Station, the START/STOP button turns blue for 5 seconds and goes off.

Using the Clean Station

• After inserting the vacuum cleaner into the Clean Station, press the START/STOP button to empty the dustbin.
  • Press the START/STOP button again to stop its operation.

NOTE

• If clumps of dust, hair, threads, etc. wound around the Metal Mesh Grille Filter in the dustbin, the Metal Mesh Grille Filter may not spin and therefore dustbin may not be emptied completely. In this case, repeatedly press the START/STOP button on the Clean Station until the dustbin is completely empty.
  • Clean the dustbin if you find any foreign matters after emptying it. (Refer to the ‘Dustbin/Washable Micro Filter’ section.)
• If the auto dustbin lid closer is stained with coffee, drinks, or other sticky or viscous substances, wipe it with a wet tissue.

Charging the battery

• When the battery level indicator turns red or the ‘Low battery’ message appears on the display, charge the battery.
• You cannot use the vacuum cleaner while charging.
• Make sure the back of the battery is correctly placed onto the vacuum charging part.
• Check that the battery level indicator is displayed while charging.
• When charging starts, the battery level indicator turns on (red, orange, or yellow depending on charging progress), it rises gradually, and changes to green when the charging is complete.

Inserting the battery

Push the battery to the end until you hear it click.

Ejecting the battery

Press the battery release button at the rear of the handle to eject the battery.

CAUTION

• Before ejecting the battery, the vacuum cleaner must be turned off.
  • The vacuum cleaner may malfunction if you eject the battery forcibly from the operating vacuum cleaner.
• Be careful not to drop the battery. If you do, you can injure yourself or damage the battery

Charging the additional battery

Charge the additional battery at the additional battery charging slot at the bottom of the Accessory Cradle.

• Push the battery in firmly.

Using the buttons and display

Display

Displays the current mode (‘MIN, MID, MAX, JET, or WET’) or the alert message

Power

• Press this button to turn on or off the vacuum cleaner.
• When you turn on the power, the vacuum cleaner starts in the ‘MID’ mode.
• If you assemble the Spray Spinning Sweeper, the vacuum cleaner starts in the ‘WET’ mode.

Suction power control (+ / -)

• You can change the suction power mode (‘MIN, MID, MAX, or JET’).
• In the ‘WET’ mode, press the + button to spray water once or press and hold the + button to spray water for up to 2 seconds.
• Press and hold the + button for 3 seconds to enter or exit the language setting. Press the + or – button to select a language.
• While the vacuum cleaner is on the Clean Station, press and hold the + button for 5 seconds to enable or disable the Energy Saving mode.

NOTE

• Only the + button works when the vacuum cleaner is in the ‘WET’ mode.
• You cannot enter the language settings when the vacuum cleaner is in the ‘WET’ mode.
• The energy-saving mode is automatically disabled if you use the vacuum cleaner.
• The brush may cling to the floor or does not turn properly depending on the floor material (a carpet, a mat, bedding, etc.). If such a problem occurs, change the suction power mode to ‘MIN or MID’.

Alert messages

Using the Accessory Cradle

• Before charging the additional battery, plug in the charger.
• Dust that remains in the accessory may fall when you detach it from the vacuum cleaner.
  • When you finish using the vacuum cleaner, shorten the Telescopic Pipe and operate the vacuum cleaner in the ‘MAX’ mode for more than 10 seconds.
  • Make sure to remove any wet pads from the Spray Spinning Sweeper before attaching it to the Accessory Cradle.
  • To detach the accessories, press the release button on the back of each accessory

Using the accessories

Detaching the accessories

• To detach the accessories, press the release button on the back of each accessory.
• Before detaching the accessories, operate the vacuum cleaner in the ‘MAX’ mode for 10 seconds to prevent any foreign matter remains inside the accessory.

Combination Tool

Use to remove dust from curtains, furniture, sofas, etc.

Extension Crevice Tool

Use to remove dust in grooves of window frames, narrow gaps, corners, etc.

Flexible Tool

Use to clean hard to reach places such as upper or rear parts of furniture or ceilings.
NOTE

You can connect the Combination Tool or the Extension Crevice Tool to use with the Flexible Tool.

Spray Spinning Sweeper

Use to clean a wood and linoleum floor with a wet pad.

• The Spray Spinning Sweeper does not have a dust suction function.

Using the reusable wet pad

• When attaching the wet pad, make sure the pad is in the center of the spin disk.

Using the disposable wet pad

• Attach the disposable wet pad to the front side (Velcro side) of the attachable pad on the spin disk.
  • If you use the disposable wet pad without the attachable pad, cleaning performance can be degraded.
• After using the disposable wet pad, discard the pad.

Detaching or attaching the water tank

• Press the lower part of the water tank to detach.
• When attaching the water tank, insert the front end first.

NOTE

• Do not use groundwater or polluted water.
• When using the Spray Spinning Sweeper for the first time, the air in the internal pump and the tube may cause to delay in spraying water. Pressthe + button repeatedly

Adjusting the pipe length

Press the pipe length adjustment button to lengthen or shorten the Telescopic Pipe

Cleaning the Clean Station

Replacing the dust bag

When the START/STOP button turns red, you should replace the dust bag

Cleaning the Premotor Filter

Use the handle to lift the filter off and shake over a bin to remove dust.

Cleaning the Fine Dust Filter

Shake the Fine Dust Filter over a bin to remove dust.

Cleaning the vacuum cleaner

For detailed information, please refer to the QR code.

Dustbin/Washable Micro Filter

CAUTION

• After cleaning the dustbin and Washable Micro Filter with water, you should dry them completely in the shade for more than 24 hours before use.
  • When heat is applied, part deformation may occur.
  • If the filter is not dried completely before being used, it can cause an odor.
• If the dustbin or the filter is clogged, the vacuum cleaner may stop its operation due to the overheating prevention device of the motor.
  • Clean the dustbin or the filters and then operate the vacuum cleaner again

Fine Dust Filter

Make sure to turn off the product before cleaning the filter.

• Twist and pull off the Fine Dust Filter, and tap it gently to remove the dust.
• Wash the filter with running water once a month to maintain the best performance of the filter.
• After cleaning, dry it completely for more than 24 hours in the shade before use.
• For assembly, turn it counterclockwise until the line under the lock image is not visible.

NOTE

• Do not use detergent or tool when washing the filter.
• Do not dry with heat.

Jet Dual Brush

If the foreign matter is not removed, use scissors to remove it.

CAUTION

• If a cloth or other foreign matter is vacuumed up and tangled with the spin brush, the spin brush will stop working to protect the brush motor. After cleaning the brush, turn the power off and then on again.
• If the brush does not work after cleaning, turn the power off and then on again.
• When cleaning the brush, be careful not to catch your fingers in the folding parts of the brush.

Slim LED Brush

CAUTION

• Do not clean the brush with water.

• When foreign matter remains on the brush, remove it with a wet tissue or a dry cloth.
  NOTE

• If the spin brush does not work after cleaning the Slim LED Brush, the overheating prevention device of the motor may have been enabled. Wait 30 minutes or more to cool the motor before operating it again.

• When removing residual debris with a wet tissue, rub the spin brush gently to avoid compressing it.

  • To prevent the bristles on the spin brush from being compressed and causing unwanted vibration, dry the spin brush vertically on the floor.

• Properly insert the spin brush to its slot.

Slim LED Brush roller wheels

Use a small screwdriver to disassemble the front and rear roller wheels.

NOTE

Tools required for disassembly. Flat head screwdriver (3 mm or less in width), Phillips screwdriver, prying tool.

CAUTION

• For your safety, wear gloves before disassembling.
• You may damage the product if you use tools that are wider or thicker than the gaps allowed for disassembly.
• Keep the detached front and rear roller wheels out of children’s reach. Beware of detached front and rear roller wheels as they can be a choking hazard.
• Be careful not to injure your hands or other body parts when using the tool.

Front roller wheel

• Disassemble the front roller wheels and remove the tangled foreign matter. Then, reassemble the wheels.
• Align the line marked on the wheel to the line on the body of the brush, and then insert it back into its place.

Rear roller wheel

• Lift the release lever to detach the rear roller wheel.
• Detach the rear roller wheel and remove the tangled foreign matter. Then, reassemble the wheel.
• Insert the rear roller wheel into its place, and then press the release lever until you hear a click.

CAUTION

Be careful not to damage the release lever with a screwdriver. There is a chance of damaging the release lever if you apply excessive force to lift the release lever or twist the screwdriver while it is inserted into the gap

Spray Spinning Sweeper

NOTE

If the spin disk does not work after cleaning the Spray Spinning Sweeper, the overheating prevention device of the motor may have been enabled. Wait 30 minutes or more to cool the motor and operate again

Pet Tool+

Cut the tangled hair or fur with scissors, and then use a vacuum cleaner to suck up the pieces

Extension Crevice Tool / Telescopic Pipe

Insert a long thin stick and rotate several times to clean the Extension Crevice Tool or the Telescopic Pipe

Appendix

Notes and cautions

Installation

CAUTION

• Do not install the product near water, in an area with excessive moisture, or near windows, etc.
• Do not place the Clean Station in a place where people pass by frequently, in the entranceway or narrow passage.
  • People may trip over it and be injured, or product damage may occur.
• If the Clean Station is installed incorrectly, it may fall over, which could cause an injury and severe product damage.
• Install the Clean Station in a place where there are no objects that could break and cause damage.
• If you have a problem with installing the Clean Station, contact a Samsung service center.

Battery usage

NOTE

• If the product does not work after you charge the battery, replace the battery. If it still does not work with the new battery, contact a Samsung service center.
• Spare batteries and the Accessory Cradle chargers need to be purchased separately.

CAUTION

• Do not disassemble the battery or the Clean Station.
• Do not apply heat to the battery and do not put the battery in a fire.
• Removing the battery during operation may cause product malfunction.
• If you have removed the battery while the vacuum cleaner motor is operating, the vacuum cleaner may not work for 30 seconds even after you re-attach the battery for safety reasons.
• Battery usage time may shorten with increased battery use. When the battery no longer charges or runs down quickly, replace the exhausted battery with a new one.
• Use only the Clean Station and batteries provided by the manufacturer.
• Before inserting the battery, confirm that the battery is being inserted in the correct direction.

Operation

NOTE

• Please charge the battery before using a newly purchased battery for the first time or if you have not used the battery for a long time.
• When the battery level is low, recharge it. If the level of the battery remains low for a long period of time, it can cause the performance of the battery to degrade.
• Before using the Spray Spinning Sweeper, detach the wet pad and put some water on it, then reattach it to the spin disk.
• Clean the reusable wet pad of the Spray Spinning Sweeper in a normal washing machine by using a neutral detergent.
  • However, If the wet pad is exposed to heat, softener, etc, it may be modified or discolored and product performance can be degraded. Do not boil the wet pad.
• Use a genuine wet pad of Samsung Electronics for the Spray Spinning Sweeper.
• If the Spray Spinning Sweeper is used without a wet pad, any product malfunction will not be covered by warranty and a service fee will be charged.
• When you purchase an additional reusable wet pad for the Spray Spinning Sweeper, contact a Samsung service center.
• When you purchase an additional disposable wet pad, check the model name (VCA-SPA95).
• When you purchase an additional dust bag, make sure to check the model name (VCA-ADB952).
  • Contact your nearest Samsung Electronics retailer or Samsung service center to purchase any consumable accessories.
• When the dust bag in the Clean Station is filled with dust, the Clean Station may stop due to the overheating prevention device of the motor. Replace the dust bag and then use the Clean Station.
• If there is a larva in the suctioned dust, it can multiply in the dust bag. Clean the Clean Station with a wet tissue and replace the dust bag.
• Do not push the Clean Station so it falls over.
  • Personal injury, product and floor damage may occur

CAUTION

• Do not leave the product leaning against a wall or a table.
  • The product may fall and an injury and severe product damage may occur.
• Do not allow children to touch the product while cleaning.
  • When the vacuum cleaner overheats, children may get burnt.
• Use both hands to carry the Clean Station.
• When you pull the power cord out of the groove at the bottom of the Clean Station, do not pull it hard. Turn the cord gently on its side so that it can come out smoothly.
  • The power cord may get damaged and could cause an electric shock or fire.
• Before unplugging or plugging in the Clean Station, turn off the vacuum cleaner and make sure that the pins of the power plug do not come into contact with your hands.
  • Fire or electric shock may occur.
• Do not step heavily on the upper part of the Spray Spinning Sweeper while using it.
  • Product damage or floor damage may occur.
• When cleaning, be careful that the side of the brush does not bump into a molding part, a wall, furniture, etc. and cause staining.
  • For a slight stain, remove it with a wet tissue or a cleaner.
• Do not use water to clean the product when in use.
• You should use the product in dry places and do not use the product in wet places or on water.
• Do not put hot water, detergent, etc. into the water tank of the Spray Spinning Sweeper.
  • Product malfunction or performance degradation may occur.
• When not using the Spray Spinning Sweeper, empty all the water inthe water tank.
• Do not use without a filter in place.

Maintenance

NOTE

• If the inner part of the Spray Spinning Sweeper is clogged with large foreign matter, the spinning speed decreases or the spin disk stops.

CAUTION

• Do not push the vacuum cleaner while it is stored in the Clean Station.
  • Personal injury, product and floor damage may occur.
• Do not clean the brush of the vacuum cleaner with water. Cleaning it with water can cause deformation of parts or malfunction.
• If you notice a continuous reduction in suction or the vacuum cleaner overheats abnormally, clean the products and replace the filters.
• When the Clean Station smells bad, replace the dust bag or clean the filters.

Troubleshooting

Before calling for service, review the problems and solutions below. Note that you will be charged for any service calls in which no defects were found.

• This Vacuum cleaner is approved the following.
  • The Low Voltage Directive 2014/35/EU
  • The EMC Directive 2014/30/EU

Product specification

Charging and cleaning time may differ depending on the brushes and the conditions of use.

NOTE

Cleaning time stated in the above table is based on a test after using one battery. Cleaning time doubles when you use two batteries consecutively.

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center

SWITZERLAND

|

0800 726 786

| www.samsung.com/ch/support (German) www.samsung.com/ch_fr/support (French)
AUSTRIA| 0800 72 67 864 (0800-SAMSUNG)| www.samsung.com/at/support

DJ68-00879P-01

References

• Samsung US | Mobile | TV | Home Electronics | Home Appliances | Samsung US
• Hilfe & Support für Produkte | Samsung Österreich

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>