MINISO SW-CM2000 Fashion Mini 2.4G Wireless Keyboard User Manual

MINISO SW-CM2000 Fashion Mini 2.4G Wireless Keyboard

PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE PRODUCT AND KEEP IT PROPERLY

Specifications

Color: Purple/Blue/Beige/Pink|
---|---
Dimensions: 28.612.62.1 cm| Keys Number: 78 Keys
Rated Voltage: 3V| Key Type: Round Keys
Battery: AAA *2| Materials: ABS
Rated Current: 50mA| Weight: 246g (receiver included: receiver 2g)

Functions

Usage: Open the battery cover at the bottom of the keyboard, take out the receiver then plug into the computer’s USB port. Insert 2 AAA batteries into battery compartment according to the right polarities, then put the cover back on.
Wait for the receiver to finish automatic installation then you can start to use.

FN Multimedia Key Combinations

| Button| Function| Button| Function
---|---|---|---|---
FN+| F1| Music| F2| Volume-
F3| Volume+| F4| Mute
F5| Previous Track| F6| Next Track
F7| Play/Pause| F8| Stop
F9| Home Page| F10| Mailbox
F11| My Computer| F12| Favorite

Accessories

Keyboard, Receiver, User Manual

Cautions

1. Prevent short circuits.
2. Do not disassemble or try to repair the product by yourself.
3. If the product does not work normally, please contact after-sales department for relevant service to maintenance.

Troubleshooting

If the product is not working properly, try the following:

1. Check if the USB head plugged properly into the port.
2. Check the settings on the computer.
3. Make sure the product or receiver is connected directly to the computer, and not through external devices such as a hub or extension cord.
4. Restart the computer.

FCC Warning

This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
   Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is  no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  FCC Radiation Exposure Statement:
  The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
  This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Warning Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement.

CUSTOMER SUPPORT

Points de collecte sur www.quefairedemesdechets.fr
www.m1nrso.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>