SENCOR SEP 702BT BK-RD Children Wireless Headphones User Manual
- June 1, 2024
- SENCOR
Table of Contents
SENCOR SEP 702BT BK-RD Children Wireless Headphones
Supply content
- Headphones
- 3.5mm audio jack
- User’s manual
- Micro USB charging cable
Description of BT Headphones and Controls
- 1. Memory card slot
- 2. On/Off button (long press)
- PLAY/PAUSE (press 1x)
- 3. “M” button change source (Bluetooth, memory card)
- 4. Volume down button (press 1x)
- previous track (long press)
- 5. Volume up button (press 1x)
- Next track (long press)
- 6. Socket for audio AUX IN mini jack (3.5 mm)
- 7. MicroUSB charging connector
- 8. LED connection/charging status indicator
- L. Left earpiece – left audio channel
- R. Right earpiece – right audio channel
Putting into operation
- Before first use, be sure to read the safety instructions contained in this user’s manual carefully.
- Before first use, start charging the headphones to the maximum level.
- Turning on the headphones – press and hold the power button and wait for the headphones to greet LlOU.
- Turning off the headphones – press and hold the power button and wait for the headphones to announce the shutdown.
Warning: To prevent damage to LlOUr hearing, always keep the volume level of LlOUr device to a minimum before connecting BT headphones to LlOur mobile device.
Note: The BT headphones will turn off after a longer period of inactivity unless they are paired to another device.
Bluetooth
To pair the BT headphones with your mobile device, do the following:
- Turn on the BT speaker and search for its Bluetooth name “SEP 702” on the device to which you wish to pair and start the pairing process.
- If you are requested to enter a pairing code while your device and the BT headphones are pairing, use the following code: “0000”.
- To cancel the pairing process, disconnect the BT earphones from your mobile device (cancel the Bluetooth pairing).
Note: To ensure a stable Bluetooth connection, make sure that the distance between the BT headphones and your paired device is kept within 10 meters. Depending on ambient interference, in some cases it may be necessary to maintain a shorter distance between the BT headphones and the paired device.
Memory Card Playback
Insert the memory card with the contacts towards the outside of the headphones (side of the headphones). When you insert a memory card, the BT headphones will automatically start playing back its contents. If there is no file to play on the memory card, the BT headphones will switch to Bluetooth mode. To release the TF memory card, press it gently into the body of the BT headphones with your fingernail or a blunt instrument and the card will release. Then you can carefully remove it with your fingernails (or with tweezers). Store audio files on the memory card in the order you want them to be played back later.
Attention: Due to a number of devices on the market, compatibility and playback support are not guaranteed for all media. The memory devices you want to connect should be tested in advance and/ or formatted as FAl32. The playback of protected media, files or content stored inside them may fail.
Audio AUX IN
The headphones are equipped with a 3.5mm jack. Your device can be connected to the BT headphones using the audio cable included in the box with the headphones. First connect the audio connector to your appliance and then into the socket in the BT headphones.
Notice: Before connecting your device to the BT headphones, ensure that the output signal from your device is at its minimum level (minimum output volume). This will prevent damage to the BT headphones and your hearing.
Charging
- A charged battery provides power for several hours of operation at normal volume levels. A high volume consumes more battery power; therefore, we recommend listening at normal volume levels.
- Charging of the BT headphones will be indicated by a red LED. An extinguished red LED indicates a fully charged battery.
Attention: For charging, use only the original accessories supplied with the appliance. To achieve maximum battery life, it is advisable to start charging the battery only when the battery is low (10% – 20%). Charge continuously until fully charged. If the battery life is already very short, it is exhausted and we recommend you contact an authorised service centre for more information.
Recommendation
- A low battery is first reported at 20% and then at 10%. We recommend that you start charging to full level at the first sign of a low battery.
- If your headphones are not to be used for an extended period of time, we recommend to fully charge the batteries once every two to three months.
Specifications
- Bluetooth Version: 5.3
- Impedance: 322
- Driver Diameter: 30 mm
- Sensitivity: 99dB+3 dB
- Frequency Range: 20 Hz – 20 kHz
- IP20
- Battery Capacity: 400 mAh
- Connector: MicroUSB
- Charging Time: 1h
- Playing Time: 7h (50% volume)
Safety Notice
- Please observe the rules of the Country or Region which you are in while driving.
- Do not disassemble or modify the headset at any reason, otherwise, It may damage or burn the headset.
- If there is any quality problem, please send the headset to authorized service centre for repair.
- Please keep the equipment along with all the accessories out of the reach of children and pets.
- Extreme temperatures will cause the device deformation, reduce the charging capacity and shorten the working life.
- Please do not immerse the earphone into water. The guarantee will be lost if damage is caused by being immersed into water.
- It will damage your hearing if you listen with high volume for a long time. It is recommended that only use the lowest volume which is necessary for speaking and listening to music.
Instructions and information regarding the disposal of used packaging materials
Dispose of packaging material at a public waste disposal site.
Disposal of used electrical and electronic appliances
The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at your applicable collection point for the recycling of electrical & electronic equipment waste. Alternatively in some states of the European Union or other European states you may return your products to your local retailer when buying an equivalent new product. The correct disposal of this product will help save valuable natural resources and help in preventing the potential negative impact on the environment and human health, which could be caused as a result of improper liquidation of waste. Please ask your local authorities or the nearest waste collection centre for further details. The improper disposal of this type of waste may fall subject to national regulations for fines.
For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or supplier.
Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information about the correct disposal method from local government departments or from your seller. This appliance complies with EU rules and regulations regarding electromagnetic and electrical safety. Changes to the text, design and technical specifications may occur without prior notice and we reserve the right to make these changes. Hereby, FAST CR, a.s. declares that the radio equipment type SEP 702 BT is in compliance with Directive 2014/53/EU.
The full text of the EU Declaration of conformity is available at the following internet address: www.sencor.eu
Manufacturer: FAST CR, a.s.
U Sanitasu 1621 25101 Ricany Czech Republic
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>