TUYA A220F Fingerprint Door Lock User Manual

TUYA A220F Fingerprint Door Lock

Product Information

Specifications

• Material: Aluminum Alloy, ABS, Acrylic
• Available Color: Black and Satin Nickel
• Door Thickness: 35-55mm
• Communication: WiFi
• Support OS: iOS 7.0 or above, Android 4.4 or above
• Battery Life: 7000 times normal unlock (10-12 months)
• Power Supply: DC6V – 4pcs AA alkaline batteries
• Static Current: 50uA
• Dynamic Current:
• Unlock Way: Fingerprint, IC Card, Passcode, Key, APP
• Unlock Time:
• Working Temperature:
• Working Humidity:
• Factory Passcode Available:
• Mortise Virtual Password:
• User Capacity:

Product Usage Instructions

• To Open and Close
  Enter the valid passcode or touch the IC card to open the door. Long press the button to close the door when the keypad is not activated.

• Fingerprint Usage
  Place your registered finger on the fingerprint sensor to unlock the door.

• IC Card Usage
  Touch the IC card to the induction area to unlock the door.

• Passcode Usage
  Enter the valid passcode using the keypad to unlock the door.

• Key Usage
  Insert the key into the cylinder and turn it to unlock the door.

• APP Usage
  Download and install the Tuyasmart app from Google Play or Apple Store. Follow the app instructions to connect and control the smart lock remotely.

Frequently Asked Questions (FAQ)

• Q: How do I change the passcode?
  A: To change the passcode, refer to the user manual for detailed instructions on setting a new passcode.

• Q: Can I add more fingerprints to the lock?
  A: Yes, you can usually add multiple fingerprints to the lock by following the instructions in the user manual or app settings.

• Q: What should I do if the battery runs out?
  A: Replace the batteries with new AA alkaline batteries following the instructions provided in the user manual.

User Manual-Smart Digital Lock
TUYA Wi-Fi VERSION

• Scan the QR code below to download the APP.
• Search Google Play or APPLE Store with Tuyasmart

Smart your life!
Version 2.0 A220F-Edition 2022

PACKING ACCESSORIES

Please check the packing box and accessories when you got the lock in hand .

PRODUCT SPECIFICATION

TO OPEN AND CLOSE

• Enter the valid passcode with “ ” or touch the IC card to open the door.
• Long press the button “ ” to close the door when the keypad is not activated.

SYSTEM INTRODUCTION

RESET TO FACTORY STATE

Attention

• There is one Reset button on the back of rear panel.
• You can press this button for 5 seconds with sound tip ”Initialize successfully”, then the lock is under factory state, the default password is: 123456.

DEAD LOCK FUNCTION

Attention

• There is one deadlock button under the thumb Knob.
• You can press this button for 1 second with sound tip“Secure lock enabled”, then the lock is dead locked inside, only the admin password can access the door, other user password or card will be invalid. And you can press the button one more time with sound tip”Secure lock disabled” to cancel this function.

INFORMATION AND SAFETY WARNINGS:

1. Introduction
   This user manual will guide you through the functions and usages of our A220 smart lock. It is important that you follow the instructions and regard all notes that appear throughout this manual. Consult this manual before you attempt to use this lock. If you have any questions that not answered by this manual or on need of non-routine service, please call our customer service hotline or send FAQ to us.

2. Safety Warnings:
   When reading this manual, note these icons: notes with the icon Must be read, understood and obeyed to prevent injury or damage to the lock.

General Usage

• This lock shall only be used as described in this manual.
• Verify that all parts of the lock are accounted for. If any parts are missing, please contact our service person.
• There is protective film on the front touch panel, if there are some scratches on the film, please remove the film if you need.
• Please use 4pcs AA batteries. Do not mix old and new batteries or other Zn/Mn batteries. Never insert objects into the lock other than batteries as described in this manual.
• Never apply any cleaner directly to any part of this lock. Only use clean water or mild cleaner on a soft non-abrasive cloth when cleaning.
• The lock must be used with Tuyasmart APP. The lock will function without the APP but full functionality may only be achieved when the APP is on use.

SALES AND SERVICE TERMS

• Please read the manual carefully before use!
• This A220 product comes with a 1-year Limited Warranty on Electronic Parts and a Limited lifetime. Mechanical and Finish Warranty against defects in materials and workmanship under normal use to the original residential user. Proof of purchase and ownership is required for the warranty to be in effect.
• Any error or question for manual or sales term, please feel free to contact with us. For any wrong operation or installation, we do not responsible for the duty.
• For the damage caused by anthropic factor or inevitable reason, we do not pay for the loss or maintain for free, please check our after sale service terms. Please do not take apart the lock if you are not technician, if necessary, please make the operations under the guide of technician.
• Notice: there maybe a little difference for product pictures with real product, please subject to our real products.
• After changing the battery, please do not throw away the battery, kindly refund to recycle bin in case of pollution!

PREPARING TO INSTALL

1. Line Drawing
   Draw a horizontal center line inside and outside the door at 1 meter from the ground. Fold the hole template, make the handle center line align at the door horizontal center line, then draw out the hole lines at front and side.

2. Adjust Direction

3. Adjust to Left from Right Direction
   Refer A: Zoom in

4. Turn the clutch on the back panel and make the arrow point to the “L”. Refer B: Adjust left/right for unlock direction(Under Factory State)

5. Press 888+ on the keypad to change the Left or right direction: When the 147 number flash, it is for left direction door. When the 369 number flash, it is for right direction door.

6. Notice the thumb knob position for Left/Right direction

INSTALLATION STEPS

1. Assemble the Latch Bolt
   Assemble the latch bolt(c) into the slot which is drilled according to the template. Remember to turn the faceplate and pull to extend the deadbolt to right position.

2. Assemble the Front Panel
   Fix the front panel(a) on the door and cross the cable through the hole. Make sure the cylinder ring shall be horizontal position.

3. Assemble Gasket
   Cross the cable through the mounting plate,and fix the gasket with the front panel.

4. Assemble the Back Panel
   Connect the cable with the connector on the PCB board. Fix the back panel with the screw as the photo.

5. Assemble the Battery
   Put 4pcs AA alkaline batteries into the battery box, notice the polarity(+/-) and test with factory passcode or APP .

6. Adjust the Lock Panel
   After finishing installation, please turn the thumb knob and adjust the tightness. Try the manual key to unlock the door and tight the screws accordingly.
   Also remember to remove the protection film for daily use.

OPERATION STEPS

Please enroll the new master password/fingerprint before you start to use this lock. you can follow the operation steps as below: (Important to use for tuya function)

1. Initialization
2. Enroll Master Password
3. Notice: the administrator can be password,IC card or fingerprint,you can set according to your own requirement, total 9 administrators.
4. Notice: Press  key to confirm, press to back to previous step, lock will exit the setting if there is no operation during 10 seconds.
5. Notice: After 5 times wrong unlock, the keypad will be locked for 60 seconds, there is no reaction for any operation during these time.
6. Delete Master Password
7. Enroll User Password
8. Delete User Password
9. Enroll User Card
10. Delete User Card
11. Enroll User Fingerprint
12. Delete User Fingerprint
13. System Setting You can make the settings following the sound tip for the unlock type/Language/Lock time etc, these functions are designed for some special conditions.
14. Reset Setting

Network Setting

Attention

Notice: Above are the standard operation for the lock with password and keycard function. if you need to use the remote unlock function,you shall use the Tuya smart app to connect the device and make the settings accordingly. Before using the tuya function, there is a must to issue master password first but not under default password:123456.

1. Please download the Tuyasmart or Smart life on Apple store or Google play. also you can scan the QR code below to download the APP directly.

2. Please register one account with your E-mail or mobile number.

3. Network Setting Notice: There are two type of connections under the manual: AP mode pairing and standard pairing or BLE connection(dual module).

4. Standard Pairing(EZ mode)
   Please run the Tuya smart APP and choose the WiFi lock under the “Security&Sensors”. please ensure the privacy button is under unlock state, if it is under lock state, you can not configure the Wi-Fi connection.

5. Hotspot Connection(AP mode)
   Please run the Tuya smart APP and choose the WiFi lock under the “Security&Sensors”.

6. Quick Connection by BLE
   This is one extra way for connection by BLE. This operation shall be done for the lock that under AP or EZ mode state(Number 5 flashing). there is one window pop up as below:

7. Remote Unlock Function
   When the visitor press the number 9+# by sequence, there is one remote unlock request send to the administrator in the App as the photo, you can press the “Agree” to unlock the door or reject to cancel the operation.

8. Online Password Function
   When the visitor visit your office or home, you can generate the temporary password with valid time period, refer the below operation step.
   Also you can check the unlock record in the APP window.

9. Offline Password Function
   There is one-time password and time-limited password for offline type passwords.you can choose to generate the one-time password like below,
   it is only valid for 6 hours, and time-limited password within 24 hours before it expires, please use this password on the lock before it expires. The one- time password and time-limited password for offline type password can not work when the lock is under dead lock state, only the administrator (fingerprint/password or card user)can access during this state.

10. Smart Linkage Function

11. You can choose the feature and message notification method upon the using condition such as family go home/door lock alrm/unlock on arrival etc.

12. There is also one smart linkage feature with your smart Tuya products.

13. You can click the assignment and find the scene device, under this option, you can link other tuya smart devices together, for sample the LED bulb, when you press the handle to unlock the door at night time, the LED bulb light will turn on together.

Special Remark for Network Function
Please enroll the new master password or fingerprint before you start to use this lock. you can follow the operation steps with this manual, network setting can not be done under the default master password: 123456, you shall change master password first!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>