EAFC CZK-5628 Tire Inflator Portable Air Compressor User Manual
- June 1, 2024
- EAFC
Table of Contents
Tire Inflator
USER MANUAL
(Please read this manual prior to
using this product)
CZK-5628 Tire Inflator Portable Air Compressor
WARNING
Children must not operate the Tire Inflator alone. Never use the Tire Inflator
in direct sunlight, high temperatures, or high pressure environments. Keep the
Tire Inflator away from water and rain; it is not suitable for use in water.
To avoid damage, excess heat, toxic fumes, fire, or explosion, turn off and
allow the Tire Inflator to cool for 30 minutes after 10 minutes of use. Always
turn off the power switch after use. Before using this product, carefully read
all warnings and instructions. Improper use can result in product damage
beyond the Seller’s responsibility.
ATTENTION
To minimize the risk of electric shock, refrain from exposing your Tire
Inflator to rain. It is recommended to store it indoors and away from any
sources of fire. Attention:
- This product may experience slight heating during normal operation, which is deemed a typical occurrence.
- In order to prolong the air pump’s lifespan, we do not recommend continuous inflation for more than 10 minutes. Should prolonged use be necessary, intermittent breaks are advised to allow for the cooling down of your tire inflator.
PRODUCT PARAMETER
| Product version | Cordless |
|---|---|
| Product model | CZK-5628 |
| Voltage | 7.4 V |
| Power | 50W |
LAYOUT
1. Air hose
2. Digital display
3. Operation buttons
4. Air hose port| 5. LED light
6. Type-C input
7. USB Output
8. Air hose storage port
---|---
Accessory
OPERATION GUIDE
Instructions for use
*Please charge it fully before use
|
---|---
Connect the air hose to the tire inflator| Connect the other end of the air
hose to the valve of tire
|
Press and hold the “M” button to wake up the tire inflator| Press and hold the
“ ” button to switch unit.
|
Press the “ ” button to switch “ ” five modes| Press “+” “-” button to preset
tire pressure
|
Press “M” to start the tire inflator| The tire inflator will stop
automatically once tire pressure reaches preset value
Four modes
Preset tire pressure
Press and hold “ ” to switch the unit. Use the “+” or “-” button to adjust the numerical value, and wait a few seconds after setting for the numbers to stop flashing. Then turn on the inflation switch to start the process. The tire inflator will automatically stop inflating when it reaches the specified air pressure.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>