EAFC VC012 Car Vacuum Portable Cordless User Manual
- June 14, 2024
- EAFC
Table of Contents
USER ‘S MANUAL
VC012 Car Vacuum Portable Cordless
VCo12
VACUUM CLEANER
oo rgroted & dual mode
WARNING
Please read this manual carefully before using this product nd keep it for
future reference.
- Do nat place in high temperature or humidity.
- It is forbidden to modify, disassemble, crush, or throw into fire.
- Do not continue to use if there is an abnormality.
- It is strictly forbidden to use unlicensed or incompatible adapters and charging cables to charge the product, which may cause malfunction and danger.
- If you do not use this product for a long time, please store the product in a cool and dry environment, in order to ensure the service life of the product battery, please fully charge and discharge the product at least once every 3 months.
- This product is not intended for use by children or persons with physical, sensory, or mental impairments.
- **NOTE**
- Long press the power on button display “0%” flashing, the vacuum cleaner cannot start, the battery is insufficient, please charge it in time.
- Please use the charging cable supplied by this machine to charge the product, or use o mobile phone adapter with safety certification of SV/2A4 and above and the standard charging cable to charge the product, and it is forbidden to purchase an adapter to charge the product without permission.
- As the number of times the product is used, the vacuum cleaner battery life may deteriorate.
- Clean the HEPA filter element in time, otherwise it will affect the dust removal effect.
- After use, please keep the product in a cool, dry, away from high temperature, high humidity and high dust environment.
- It is strictly forbidden to inhale combustible substances such as cigarette butts, freshly extinguished charcoal ash and burning paper scraps when using this product to remove dust.
- Due to the built-in high-rate lithium battery, it is strictly forbidden to disassemble the product in case of abnormal noise or other suspected quality problems.
- Do not use this product to absorb water and wet objects, otherwise it will damage the motor and cause permanent damage to the product, and the product quality problems coused by this behavior are not covered by the product warranty.
- After use, please keep out of reach of children, children are strictly prohibited from operating without permission.
- This product is not suitable for use in high magnetic field environment.
|
---|---
Do not inhale combustibles| Do not absorb water or moisture
|
Do not cover the air intake/outlet with your hands or foreign objects| Do not
inhale sharp hard objects
|
Do not refit, disassemble or squeeze| Do not throw into fire
|
Not suitable for use in high magnetic field environments| Place in the car
away from direct sunlight
PRODUCT INTRODUCTION
PACKAGE CONTENTS
PRODUCT PARAMETERS
| Model | VCO12 |
|---|---|
| Vacuum degiee | First gear 8000-9000Pa |
Second gear 12000-13000Pa
Product power| 85W
Working noise| 90db
Working voltage| 11.1v
Battery specification| 2000mA*3
Enduronce tme.| First gear 21-25min second gear T1-15min
Blowing range| First gear about 8.65m/s Second gear about 11.2m/s
Charging time| 3.5-4.5H
Charging voltage| DC-6V
Charging current| ≤2000mA
Charging port| Type-C
Lighting| LED lighting
Display screen| Digital display
Working temperature| -10°C-50°C_(14F~122°F)
Storage temperature| – 20C-60°C (47F-140°)
Waterial| ABS+Aluminum alloy
Dust cup capacity| 0.1L
Product size| 276.5X65.5mm
Net weight| 562g
CHARGING METHOD
During use, the bottery power graduly decreases as the time of use increases,
and the current battery level can be observed through the digitaldisplay.
If the power s turmed off during use, please use the supplied charging coble
to charge the product . Curent charge: 0%
(The bottery is low, the maching shuts dowg after 0% Hashes 10 times, piease
chorge) Full battery: 100%
(gatery icon is oways on whie choraing) Charging status
(The battery icon flashes and the charge gradually increases.Plus, charging
time 3.5-4.5H)
Recommend using 5V 2.4A charger.
- Put the vacuum cleaner on the desktoplplane
- Insert the USB power cable Into the chorging hole of the vacuum cleaner,
- Connect the other end of the power cord with the. 5V ****m2 and above USB socket, such as mobile phone charger, mobile power bark, etc.
ACCESSORIES INSTALLATION AND USE
Install the corresponding accessaries according to diferent ANote: Peose turn off the vacuum cleaner before replacing the accessores.
Install the corresponding accessories according to different occasions.
Note: Please turn off the vacuum cleaner before replacing the
accessories. Suction nozzle: suitable for dust cleaning of various gaps such
as doors, seats,cabinet corners, drawers and ashtrays. Brush+Suction nozzle:
It combines the dual functions of suction and wiping, and is suitable for
cleaning dust on various surfaces such as cushions,suede parts of foot pads
keyboards and air-conditioning outlets. Mouthpiece: suitable for inflating
small equipment such as lifebuoys and balloons, and can also clean fine dust
in various gaps such as windows and keyboards.
Brush + mouthpiece: It can clean the fine dust of various gaps
such as windows and keyboards while wiping.
DUST REMOVAL OPERATION
This product is a multifunctional wireless vacuum cleaner for both car and home use, please fully charge the battery before use. Please use the accessories reasonably and correctly to achieve the best dust removal effect.
- Turn the LED light on/off
Short press 7 time, turn on the light, Short press again to turn off the lights. - Power on/off Long press for 3s, turn on, Press and hold again for 3s to shut down.
- Switch Levels
When powered on, press briefly 1 time, Cycle to switch 1st/2nd gear.
Note: If the machine is suddenly shut down during use, please check whether the air inlet is blocked, if it is blocked, please clean it up and continue to use it normally. If the system is turned off due to insufficient power, please charge the product in time Electricity.
DISASSEMBLY AND CLEANING
Please clean up the dust bin in time after each use, and keep the dust bin dry.
|
---|---
Press the dust bin switch to open the dust bin cover.| Pour the garbage in the
dust collection hood into the garbage can.
|
Rotate the dust bin to remove the dust bin from the fuselage remove.| Remove
the HEPA filter from the dust container.
|
Rotate the metal filter screen and separate the metal filter screen from the
HEPA element.| If necessary, use a slightly damp rag or Disposable paper
towels to clean the dust bin.
|
The metal filter screen and HEPA filter element can be washed with clean
water.| Ory the metal filter screen and HEPA filter element before reuse. (Do
not expose to the sun)
Note: After cleaning the HEPA filter element, it must be dried and then
loaded into the dust silo, and it is forbidden to load the undried HEPA filter
element into the dust bin to avoid the corrosion of the motor and substrate
caused by water vapor of the HEPA filter element.
Our company’s wireless handheld vacuum cleaner after-sales service commitment
content is as follows:
With a purchase record, warranty within 12 months;
Within 7 days from the date of your signature/purchase, you can apply for free
return or exchange service through the test and confirmation of the after-
sales service center.
WARRANTY CARD
DEAR CUSTOMER
First of al, thank you very much for purchasing our products.
Within 1 yeor from the date of purchase, if you have any problems or are not
satisfied with the product, we wil provide free replacerent o refund (no
retirn required) service, please do not hesitate to contact us. We willget
back 1o you within 24 hours
Name| Handheld portable vacuum cleaner
Warranty date| Within 1 year from the date of purchase
Date of purchase| Year
Month
Day
Customer| Address…………………
Name……………..
Tel……………
Salesstores| Stor name……………..
Tel……………………………
The company reserves the right of final interpretation of this product, subject to change without notice! Activat