nevent HOFFMAN MCD18104R5 MCD Double Door Enclosure User Guide
- June 13, 2024
- nevent HOFFMAN
Table of Contents
nevent HOFFMAN MCD18104R5 MCD Double Door Enclosure
CONNECT AND PROTECT
The mild steel double door combinable floor standing enclosure range, MCD, is ideal for installation in confined spaces where a single door, when opened, would take up too much space in front of the enclosure. The doors’ loading capacity also increases as it is divided over two doors. With an IP 55 protection degree, components inside the enclosure are well protected making it well-suited for many different applications.
MATERIAL:
Frame: 1.5 mm painted steel. Doors: 2 mm painted steel. Rear, roof, and
side panels: 1.5 mm painted steel. Mounting plate: 3 mm galvanized steel.
Bottom plates: 1 mm galvanized steel.
FRAME
Seam welded reversed open profiles with 25 mm hole pattern, according to
DIN 43660. Including an integrated external hole pattern.
DOORS
Mounted with four hinges. Including a door frame with a 25 mm hole pattern. Doors cannot be reversed. Separate doors to be ordered for left-hand door locking.
REAR PANEL
Fitted by M6 Torx screws. Standard facilities for rear doors mounting.
Split rear panels in 1600 mm wide enclosures.
SIDE PANELS
Supplied as an accessory.
ROOF PANE
Removable.
LOCK:
Espagnolette 4-point locking system in the main door and 2-point locking
system in the slave door. Standard double-bit lock with 3 mm insert. Standard
inserts, cylinders, lift handles and T-handles are available as accessories.
BOTTOM PLATES
Consists of three or four (D>600) pieces.
MOUNTING PLATE
Double fold and slide into position. Adjustable in depth by steps of 25 mm,
with the MPD02 accessory. Supplied, attached on the outside of the enclosure
packaging.
EARTHING: All panels are earthed through their fittings and equipped with a separate earthing stud.
FINISH: RAL 7035 structured powder coating.
PROTECTION
Complies with IP55 | TYPE 12 | IK 10.
MOUNTING REQUIREMENTS
Standard delivery ready for combined installation. For stand-alone
installation add side panels.
DELIVERY
Frame with fitted doors, rear panel, roof panel, bottom plates, mounting
plate, and door frame (not included for PER5 version). For enclosures 2200 mm
in height, delivery includes two CMB profiles mounted in depth. Delivery also
includes earthing bolts. Delivered on a pallet that is identical to the width
of the enclosure to allow baying without removal Packing material is
recyclable.
DIMENSION
WITH MOUNTING PLATE
Enclosure dimensions| Mounting plate dimensions|
Usable depth
---|---|---
H| W| D| H| W| d| Item no.
1400| 1200| 500| 1294| 1094| 459| MCD14125R5
1600| 1200| 500| 1494| 1094| 459| MCD16125R5
1800| 800| 500| 1694| 694| 459| MCD18085R5
1800| 1000| 400| 1694| 894| 359| MCD18104R5
1800| 1000| 500| 1694| 894| 459| MCD18105R5
1800| 1200| 400| 1694| 1094| 359| MCD18124R5
1800| 1200| 500| 1694| 1094| 459| MCD18125R5
1800| 1200| 600| 1694| 1094| 559| MCD18126R5
1800| 1600| 400| 1694| 1494| 359| MCD18164R5
1800| 1600| 500| 1694| 1494| 459| MCD18165R5
1800| 1800| 500| 1694| 1694| 459| MCD18185R5
1800| 1800| 600| 1694| 1694| 559| MCD18186R5
2000| 800| 500| 1894| 694| 459| MCD20085R5
2000| 1000| 400| 1894| 894| 359| MCD20104R5
2000| 1000| 500| 1894| 894| 459| MCD20105R5
2000| 1000| 600| 1894| 894| 559| MCD20106R5
2000| 1000| 800| 1894| 894| 759| MCD20108R5
2000| 1200| 400| 1894| 1094| 359| MCD20124R5
2000| 1200| 500| 1894| 1094| 459| MCD20125R5
2000| 1200| 600| 1894| 1094| 559| MCD20126R5
2000| 1200| 800| 1894| 1094| 759| MCD20128R5
2000| 1600| 400| 1894| 1494| 359| MCD20164R5
2000| 1600| 500| 1894| 1494| 459| MCD20165R5
2000| 1600| 600| 1894| 1494| 559| MCD20166R5
2000| 1800| 500| 1894| 1694| 459| MCD20185R5
2000| 1800| 600| 1894| 1694| 559| MCD20186R5
2000| 1800| 800| 1894| 1694| 759| MCD20188R5*
2200| 1000| 600| 2094| 894| 559| MCD22106R5
2200| 1200| 600| 2094| 1094| 559| MCD22126R5
2200| 1200| 500| 2094| 1094| 459| MCD22125R5
2200| 1200| 800| 2094| 1094| 759| MCD22128R5
2200| 1600| 600| 2094| 1494| 559| MCD22166R5
- Available Soon
| MCD18185R5 | MCD18186R5 | MCD20185R5 | MCD20186R5 | MCD20188R5 |
|---|
North America
- Tel +1.800.545.6258
- Fax +1.800.527.5703
- info@nVent.com
Europe, the Middle East, and Africa
- Tel +32.16.213.511
- Fax +32.16.213.603
- info@nVent.com
Asia Pacific
- Tel +86.21.2412.1688
- Fax +86.21.5426.3167
- info@nVent.com
Latin America
- Tel +1.713.868.4800
- Fax +1.713.868.2333
- info@nVent.com
2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>