SEALEY APMS84 Modular 4 Drawer Cabinet with Worktop User Manual
- June 1, 2024
- SEALEY
Table of Contents
665MM MODULAR 4
DRAWER CABINET WITH
WORKTOP
MODEL NO: APMS84
APMS84 Modular 4 Drawer Cabinet with Worktop
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE
OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND
WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE
INSTRUCTIONS SAFE FOR FUTURE USE.
| |
---|---|---
Refer to instructions| Wear protective gloves| Wear safety footwear
SAFETY
WARNING! Use the cabinet on level and solid ground, preferably concrete.
Avoid tarmacadam since the cabinet may sink into the surface.
Locate the cabinet in a suitable working area.
Keep the cabinet clean and tidy in accordance with good workshop practice.
Keep children and unauthorised persons away from the working area.
Take care of sharp edges when assembling.
DO NOT use the cabinet for any purpose other than that for which it is
designed.
DO NOT use the cabinet outside.
DO NOT get the cabinet wet or use in damp or wet locations or areas where
there is condensation.
DO NOT clean the cabinet with any solvents which may damage the surfaces.
Note: The assembly of this product may require assistance.
INTRODUCTION
Use as part of a complete garage storage system or as an individual storage unit. Four drawers fitted with ball bearing slides. Features adjustable feet for levelling on uneven floors. Supplied with worktop and a lock with two keys. Supplied flat-packed for ease of transportation and requires some simple self-assembly.
SPECIFICATION
Model No. ……………………………………………….. APMS84
Overall Size (W x D x H) …………….. 665 x 460 x 820mm
Large Drawer (x2) ……………………… 570 x 370 x 100mm
X-Large Drawer (x2) ………………….. 570 x 370 x 215mm
CONTENTS
4.1. Check contents prior to assembly.
4.2. Contact stockist with regard to any discrepancy.
ASSEMBLY
To place the
draw back, simply push the ball bearing carriage all the way to the endof the
slides (on both sides), and align the side runners on the drawer with the
sidetracks on the unit. Push it carefully until it stops.
NOTE: If they do not go smoothly please take out and repeat step.
If you need to remove drawer, please pull the drawer all the way out, then
push theplastic release lever out of the ball bearing slide up on one side and
down on theother side. Then pull the draw out completely.
NOTE: Maximum weight limit drawers:- 25Kg
Maximum weight limit cabinet:- 150Kg
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk.
IP32 7AR
01284 757500
sales@sealey.co.uk
www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
APMS84 Issue 3 08/11/23
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>