FERSA BTC 373 S-X Rotor Removal Tool For Tesla Installation Guide

FERSA BTC 373 S-X Rotor Removal Tool For Tesla

ROTOR REMOVAL TOOL FOR TESLA MODEL S/X

IMPORTANT: It is necessary to acquire the BTC 373 I Rotor Extractor (Exclusive Patent) and BTC 359 I Internal Puller Spindle tools.

This tool is designed to facilitate the disassembly of the rotor located in the electric motor of Tesla Model S/X vehicles.

1. Identification of Rotor Shaft: Disassemble and remove the inverter section to reveal the gearbox and its gears. The rotor shaft to be extracted is indicated in the following image:
   

2. Rotor Housing and Bearing: The rotor shaft is connected to the interior of a bearing, fixed to the casing through interference:
   
   To beg in extraction, remove the rear cover of the motor by using a ham mer and removing the securing screws:
   

3. Tool Application:

   • Our tool is designed to push the shaft from the inside out.
   • Constructed from steel, it conforms to the shape of the casing and can be secured using its own screws, which were initially removed to separate the rotor and inverter sections.
   • The tool features a hole aligned with the rotor shaft but of larger diameter, a I lowing the claws of a com metrical bearing extractor to fit. It also serves as support for pushing the entire rotor outward by activating the extractor.

4. Efficient Rotor Extraction:

   • Th is system facilitates the effective and hassle-free extraction oft he rotor.
   • It expels the outer cover in a single step, eliminating the need for prior removal.

5. Detailed Usage Images: Below are detailed images demonstrating the product in us.
   
   Rotor shaft upon which pressure is applied
   
   Extraction tool fixed to the Drive Unit housing
   
   Internal puller ((the tabs of the legs grip onto the extraction tool))
   
   Extraction system (Tool+ Internal puller)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>