YESWELDER Welding Table Instruction Manual
- May 15, 2024
- YESWELDER
Table of Contents
WELDING TABLE
OPERATOR’S MANUAL
Copyright© YesWelder
To help us serve you better, go to
www.yeswelder.com
PRECAUTIONS — READ BEFORE USING
SAVE THIS MANUAL
Save This Manual Keep this manual for the safety warnings and precautions,
assembly, operating, inspection, maintenance and cleaning procedures. Write
the product’s serial number in the back of the manual near the assembly
diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact and undamaged. If any
parts are missing or broken, please contact customer service on time.
WARNING
Read this material before using this product. Failure to do so can result
in serious injury.
Important Safety Information
Assembly Precautions
- Assemble only according to these instructions. Improper assembly can create hazards.
- Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
- Keep the assembly area clean and well lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of drugs or medication.
- Weight capacity and other product capabilities apply to properly and completely assembled product only.
Use Precautions
-
This product is not a toy. Do not allow children to play with or near this item.
-
Use as intended only.
-
Inspect before every use; do not use if parts are loose or damaged.
-
Do not exceed listed weight capacity, evenly distributed and balanced.
Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure. -
Maintain product labels and nameplates. These carry important safety information.
-
Operate and store the table on a flat, dry, level surface.
-
Read welding equipment manual before use.
-
If using gas cylinders, be especially careful to prevent tipping or damage to the cylinders. Follow gas cylinder suppliers and gas supplier’s safety instructions at all times.
SPECIFICATIONS
| Material | Steel |
|---|---|
| Color | Black |
| Item Weight | 25.5Kg/56.2Ibs |
| Item Dimensions | 885×915×460mm/34.8X36×18.1inch |
PACKAGE CONTENTS
ASSEMBLY STEPS
| ● Attention: During the installation of the welding table, it is
recommended to use the provided wrench to tighten the screws.
---|---
Step 1: Install the welding table handle by securing it to the side of the top plate using nuts and bolts.
Step 2: Install the table legs by fastening four legs to the bottom of the top plate using nuts and bolts.
Step 3: Install the tool palette by securing it inside the legs with nuts and bolts, choosing a suitable height.
Step 4: Install the hook side panel by securing it between two table legs using nuts and bolts.
Step 5: Install the casters by using the nuts provided with the casters to secure them to the bottom of the table legs. Attach the two brake casters on the same side as the handle and fix the swivel caster on the opposite side.
LIMITED WARRANTY
LIMITED WARRANTY – Subject to the terms and conditions below.
YESWELDER guarantees its equipment to be free from material and workmanship
defects at the time of shipment within a limited warranty period. However, the
warranty does not cover damage caused by misuse, abuse, negligence, accidents,
unauthorized repairs or modifications outside company facilities, criminal
activities, improper installation, normal wear and tear, or damage due to lack
of maintenance. Additionally, the company is not responsible for death,
personal injury, or property damage caused by the use of its products, as well
as incidental, consequential, special, or indirect damages arising from
product use. Certain state laws may not allow the exclusion or limitation of
incidental or consequential damages, so the above limitations or exclusions
may not apply to you. This warranty expressly replaces all other express or
implied warranties, including warranties of merchantability and fitness for a
particular purpose. Warranty claims require presentation of the purchase
receipt, so be sure to retain the original invoice or sales receipt.
For warranty service, please contact your YESWELDER distributor.
Effective November 7, 2023